• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.439-440
• /
• 2007

To enhance the electron injection from the cathode of organic light-emitting diodes (OLEDs), We have studied characteristics of device that electron injection layer(EIL) is inserted between emissive layer and cathode. We fabricated bi-layer cathode $Li_2O$(x nm)/Al(100nm) and LiF(x nm)/Al(100nm) using LiF and $Li_2O$ as an electron injection layer. We analyzed the current efficiency, luminance efficiency, and external quantum efficiency of the device by varying the thickness of $Li_2O$ and LiF to be 0.5nm, 1nm, or 3nm. Using the EIL, we have obtained the efficiency of 7cd/A and the luminance of $20,000cd/m^2$. There is an improvement of efficiency by more than 3 times than the device without the $Li_2O$ layer.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.22-26
• /
• 2021

Thin-film encapsulation (TFE) technology is most effective in preventing water vapor and oxygen permeation in the organic light emitting diodes (OLED). Of those, a laminated structure of Al₂O₃ and MgO were applied to provide efficient barrier performance for increasing the stability of devices in air. Atomic layer deposition (ALD) method is known as the most promising technology for making the laminated Al₂O₃/MgO and is used to realize a thin film encapsulation technology in organic light-emitting diodes. Atomic layer deposited inorganic films have superior barrier performance and have advantages of excellent uniformity over large scales at relatively low deposition temperatures. In this study, the control system of the MgCP₂ precursor for the atomic layer deposition of MgO was established in order to deposit the MgO layer stably by the injection time of second level and the stable heating temperature. The deposition rate was obtained stably to be from 4 to 10 Å/cycle using the injection pulse times ranging from 3 to 12 sec and a substrate temperature ranging from 80 to 150 ℃.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.511-516
• /
• 2023

Amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) with a coplanar structure were fabricated to investigate the feasibility of their potential application in large size organic light emitting diodes (OLEDs). Drain currents, used as functions of the gate voltages for the TFTs, showed the output currents had slight differences in the saturation region, just as the output currents of the etch stopper TFTs did. The maximum difference in the threshold voltages of the In-Ga-Zn-O (a-IGZO) TFTs was as small as approximately 0.57 V. After the application of a positive bias voltage stress for 50,000 s, the values of the threshold voltage of the coplanar structure TFTs were only slightly shifted, by 0.18 V, indicative of their stability. The coplanar structure TFTs were embedded in OLEDs and exhibited a maximum luminance as large as 500 nits, and their color gamut satisfied 99 % of the digital cinema initiatives, confirming their suitability for large size and high resolution OLEDs. Further, the image density of large-size OLEDs embedded with the coplanar structure TFTs was significantly enhanced compared with OLEDs embedded with conventional TFTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.688-691
• /
• 2004

In this study, we synthesized a new red emitting material of a Red225 doped into $Alq_3$ (tris(8-quinolinolato)aluminum (III)) and fabricated white organic light-emitting diodes (OLEDs) with a simple device structure. With a blue emitting material of DPVBi (4,4'-bis(2,2'-diphenylvinyl)1,1'-biphenyl) that can transfer effectively both a hole and an electron, OLEDs with a narrow emission layer could be possible without a hole-blocking layer. Consequently, the driving voltage and stability of devices have been improved. The devices show the Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.36, 0.35) at luminance of 2000 cd/$m^2$. The luminous efficiency is about 3.5 cd/A, luminance is about 12000 cd/$m^2$ and current density is about 350 mA/$cm^2$ at 12 V, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제26권9호
• /
• pp.1344-1346
• /
• 2005

We report microcavity effect of top emission organic light-emitting diodes (OLEDs) by using Al cathode and anode, which are feasible for not only top emission EL and angle dependant effects but facile evaporation process without ion sputtering. The device in case of $Alq_3$ green emission showed largely shifted EL maximum wavelength as 650 nm maximum emission. It was also observed that detection angle causes different EL maximum wavelength and different CIE values in R, G, B color emission. As a result, the green device using $Alq_3$ emission showed 650 nm emission ($0^{\circ}$) to 576 nm emission ($90^{\circ}$) as detection angle changed. We believe that these phenomena can be also explained with microcavity effect which depends on the different length of light path caused by detection angle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1007-1010
• /
• 2003

We made use of $Alq_3$ which is the representative light-emitting material. Electric conduction mechanism and luminance characteristics were analyzed in this paper. We have also measured current density-thickness-voltage characteristics with thickness variation from 60 to 400nm. we analyzed the low electric and the high electric field in theoretically. Also, maximum luminous efficiency is the thickness 200 nm of $Alq_3$ in luminous-thickness characteristics.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4590-4599
• /
• 2011

컬러 시프트 현상은 다양한 색상을 생성하는 유기발광다이오드 소자에 있어서 발광 색상의 순도를 저하시키는 주요 원인으로 작용되어지고 있다. 본 연구에 적용한 유기발광다이오드 소자의 기본 구조는 ITO/${\alpha}$-NPD/$Alq_3$:DCJTB [wt%]/$Alq_3$/Mg:Ag로 구성되어지며, 컬러 시프트가 일어나는 메커니즘을 규명하기 위하여 유기발광다이오드 소자 내에서의 전기광학적인 특성 요인들을 수치 해석하였다. 또한 DCJTB[wt%]의 도핑 농도 비율을 변화시켜 가면서 컬러 시프트의 원인을 조사하였다. 그 결과, 발광층과 정공 수송층의 경계면에서 발생되어지는 호스트에 트랩된 전자들과 자유 정공들 그리고 게스트에 트랩된 정공들과 자유 전자들에 의한 재결합율의 변화가 컬러 시프트 현상의 주요 요인들 중의 하나임을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.499-502
• /
• 2008

Effects of a dielectric capping layer on the luminous characteristics of top emitting organic light emitting diodes (TOLEDs) have been analyzed using a classical electromagnetic theory. Special attention was given to the influence of the cavity length on the effectiveness of the capping layer. The luminance characteristics of the TOLEDs influenced by the combined effects of the cavity length and the capping layer thickness. Furthermore, these combined effects also modify the emission spectrum and pattern of the TOLEDs, which result in the improvement of total luminance of the device, but no significant change in the device out-coupling efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.354-355
• /
• 2009

In the fabrication of inverted top-emitting organic light emitting diodes (ITOLEDs), the sputtering process is needed for deposition of transparent conducting oxide (TCO) as top anode. Energetic particle bombardment, however, changes the physical properties of underlying layers. In this study, we examined plasma process effects on tungsten oxide ($WO_3$) hole injection layer (HIL). From our results, we suggest the theoretical mechanism to explain the correlation between the physical property changes caused by plasma process on $WO_3$ HIL and degradation of device performances.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.477-478
• /
• 2005

The devices with a structure of ITO/$Alq_3$/Al were fabricated and their impedance properties were analyzed. It is obtained that an effect of resistance $R_p$ of the device was dominant at the low frequency and the high voltage region, emitting region, and it is ignored at the high frequency region. Capacitance $C_p$ appears intensely in a range of all frequencies of non-emitting region, below turn on voltage.