• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.147.3-147
• /
• 1998

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.1
• /
• pp.63-66
• /
• 2000

Organic Electroluminescent devices(OELD) consisted of multilayer structures have been studied for the application the application to flat-panel display. Metal-chelate complexes, zinc bis(2-(2-hydroxyphenyl)benzoxazolate) ($Zn(BOX)_{2}$) and zinc bis(2-(2-hydroxyphenyl)benzothiazolate) ($Zn(BOX)_{2}$), have been intensively investigated as an white-light emitting layer and recognized to have good electroluminescent(EL) properties. In this study, ($Zn(BOX)_{2}$) and ($Zn(BTZ)_{2}$) were synthesized and characterized by FT-IR, $^{1}H-NMR$, UV-VIS and PL. Their EL properties were also studied and their ionization potential(IP) and electron affinity(EA) were also measured by cyclic voltammetry(CV).

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1373-1376
• /
• 1998

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of their capability of multicolor emission, and low operation voltage. In this study, glass substrate/ITO/TPD/$Eu(TTA)_3(phen)/Alq_3/Al$ structures were fabricated by evaporation method, where aromatic diamine(TPD) were used as a hole transporting material, $Eu(TTA)_3(phen)$ as an emitting material, and tris(8-hydroxyquinoline)Aluminum ($Alq_3$) as an electron transporting layer. Electroluminescent(EL) and I-V characteristics of $Eu(TTA)_3(phen)$ with a variety thickness was investigated. This structure shows the red EL spectrum, which is almost the same as the PL spectrum of $Eu(TTA)_3(phen)$. I-V characteristics of this structure show that turn-on voltage was 9V and current density of $0.01A/cm^2$ at a dc drive voltage of 9V. Details on the explanation of electrical transport phenomena of these structures with I-V characteristics using the trapped-charge-limited current model will be discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.1
• /
• pp.91-106
• /
• 2008

Development of white light emitting materials has been an interesting area for scientists and scientists have developed many organic, polymer and inorganic materials for white electroluminescent devices. Among them, single component small molecules gave best results in terms of efficiency, simplicity of device fabrication, and CIE values. Therefore, this review covers detailed discussion about syntheses of small compounds used in white organic light emitting devices until 2007.

• Journal of Sensor Science and Technology
• /
• v.4 no.4
• /
• pp.10-15
• /
• 1995

Organic thin film electroluminescent(EL) cells were fabricated. Their output characteristics and luminance versus voltage characteristics were measured with different work function metal electrodes. The EL structure was Indium-Tin-Oxide(ITO)/hole transport layer/emission layer(electron transport layer)/metal electrode. PMMA+TPD(0.5 wt%), MC homopolymer+TPD(0.005 wt%) and (MC/MMA) copolymer+TPD(0.005 wt%) were used as hole transport layer. Ca, Mg, Mg:Ag(10:l) and Al were used as metal electrode. I-V output showed exponential feature, and the threshold voltage of 5 volts and the luminance of over 700 $Cd/m^{2}$ at 10 volts were observed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1103-1107
• /
• 2007

Highly efficient organic electroluminescent devices (OLEDs) based on 4,7- diphenyl-1, 10- phenanthroline (BPhen) as the electron transport layer (ETL), tris (8-hydroxyquinoline) aluminum ($Alq_3$) as the emission layer (EML) and N,$\acute{N}$-bis-[1-naphthy(-N,$\acute{N}$diphenyl-1,1´-biphenyl-4,4´-diamine)] (NPB) as the hole transport layer (HTL) were developed. The typical device structure was glass substrate/ ITO/ NPB/$Alq_3$/ BPhen/ LiF/ Al. Since BPhen possesses a considerable high electron mobility of $5\;{\times}\;10^{-4}\;cm^2\;V^{-1}\;s^{-1}$, devices with BPhen as ETL can realize an extremely high luminous efficiency. By optimizing the thickness of both HTL and ETL, we obtained a highly efficient OLED with a current efficiency of 6.80 cd/A and luminance of $1361\;cd/m^2$ at a current density of $20\;mA/cm^2$. This dramatic improvement in the current efficiency has been explained on the principle of charge balance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.315-318
• /
• 1998

Organic light-emitting diodes(OLEDs) or electroluminescent devices have attracted much attention because of their possible application as large-area light-emitting displays. Their structure was based on employing a multilayer device structure containing an emitting layer and a carrier transporting layer of suitable organic materials. In this study, several Tb complexes such as Tb(ACAC)$_3$(Phen), Tb(ACAC)$_3$(Phen-Cl) and Tb(TPB)$_3$(Phen) were synthesized and the photoluminescence(PL) and electroluminescence (EL) characteristics of their thin films were investigated by fabricating the devices having a structure of anode/HTL/terbium-oomplex/ETL/cathode, where TPD was used as an hole transporting and Alq$_3$ and TAZ-Si were used as an electron transporting materials. It was found that the photoluminescence(PL) and electroluminescence(EL) characteristics of these terbium complexes were dependent upon the ligands coordinated to terbium metal. Details on the explanation of electrical transport phenomena of the structure with I-V characteristics of the OLEDs using the trapped-charge-limited current(TCLC) model will be discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1280-1283
• /
• 2005

A novel zinc complex, Zn(phen)q, was synthesized from 1,10-phenanthroline (phen) and 8-hydroxyquinoline (q) as organic ligands and its electroluminescent (EL) properties were characterized. The structure of Zn(phen)q was elucidated by FT-IR, UV-Vis and XPS. The complex Zn(phen)q showed thermal stability up to $300^{\circ}C$ under nitrogen flow, which was measured by TGA and DSC. The photoluminescence (PL) of the Zn(phen)q was measured from the THF solution and the solid film on quartz substrate. The PL emission of Zn(phen)q exhibited green light centered at about 505nm. The EL devices were fabricated by the vacuum deposition. The EL devices having the structure of ITO/a-NPD/Zn(phen)q/Li:Al were studied, where 4,4'-bis[N-(1-naphthyl)-N-phenylamino]biphenyl(a-NPD) used as a hole transport layer(HTL). a-NPD has high Tg of $96^{\circ}C$ and thus makes the device thermally stable. The EL emission of Zn(phen)q exhibited also green light centered at 532nm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.757-761
• /
• 2001

We studied emitting properties of organic electroluminescent devices fabricated using the spin-coating and Langmuir-Blodgett(LB) technique. The LB technique has the advantage of precise control of the thickness better than spin-coating method. LB monolayer of poly(3-hexylthiophene)(P3HT) was deposited 27 layers onto the indium-tin-oxide(ITO) substrate as Y-type films by the vertical dipping method. In the absorption spectra, the λ$\_$max/ of P3HT-AA LB films and of spin-coating films showed about at 510, 545 and 590 nm corresponding to 2.43, 2.28, 2.10eV. And we observed that the turn-on voltage of devices deposited by LB method(10V) was higher than that of spin-coating method(8.5V) in voltage-current-luminance characteristic. In the logV-logJ characteristics of ITO/P3HT-AA LB/Al device, we confirmed that El device fabricated by LB method follows three conduction mechanisms: ohmic, space-charge-limited current(SCLC) conduction and trapped-carrier-limited space-charge current(TCLC) conduction.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.1
• /
• pp.41-44
• /
• 2014

Emission properties of the organic light-emitting diodes were investigated with the use of a hole-injection layer of copper(II)-phthalocyanine (CuPc). The manufactured device structure is indium-tin-oxide (ITO) (180 nm)/CuPc (0~50 nm)/N,N'-Bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) (40 nm)/tris-(8-hydroxyquinoline) aluminum (III) ($Alq_3$) (60 nm)/Al(100 nm). We investigated the luminescence properties of $Alq_3$ which is affected by the CuPc hole-injection layer. Also, we studied the influence of light-emission properties in the structure of an ITO/CuPc/TPD/$Alq_3$/Al device depending on the several thicknesses of CuPc (0~50 nm) layer. As a result, it was found that the hole injection occurs smoothly in the device with 20 nm thick CuPc layer, and the properties become significantly worse in the device with a CuPc layer thickness higher than 40 nm. We studied the topography and external quantum efficiency depending on the layer thickness of CuPc. Also, we analyzed the electroluminescent characteristics in the low and high-voltage range.