• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.296-305
• /
• 1996

Chemical characteristics of paper sludge, degradation of the sludge in soil and $CO_2$ generation, and changes of nitrogen and heavy metals in soil treated with the sludge were investigated. The results obtained was summarized as follows: 1. Degradation rate of paper sludge in soil was 19% at room temperature, and 28% at $incubation(30^{\circ}C)$ temperature after 12-weeks treatment. 2. T-C, T-N and the C/N ratio of the sludge in soil at room temperature were 15.5%, 0.22% and 71 respectively, and 14.5%, 0.24% and 60, respectively, at $incubation(30^{\circ}C)$ temperature after 12-week treatment. 3. $CO_2$ genaration in soil treated with 1%, 3% and 5% of the sludge was 247mg/100g, 334mg/100g and 458mg/100g, respectively, at room temperature, and 385mg/100g, 550mg/100g and 618mg/100g, respectively, at incubation temperature after 12 weeks treatment. 4. Mineralization ratio of organic nitrogen in soil treated with 1%, 3% and 5% of the sludge was 8.7%, 13.4% and 16.2%, respectively, at $incubation(30^{\circ}C)$ temperature after 12-weeks treatment. 5. The amounts of DTPA-extractable Cu, Cd, Zn, Pb, and Cr in Soil treated with paper sludge were $0.7{\sim}2.2$, $0.1{\sim}0.17$, $1.4{\sim}2.8$, $1.4{\sim}2.8$, and $0{\sim}0.7mg/kg$, respectively. Mean while, those of $HNO_3$ extractable Cu, Cd, Zn, Pb, and Cr were $7.9{\sim}10.0$, $0.6{\sim}0.9$, $17.6{\sim}34.4$, $14.7{\sim}18.5$, and $5.8{\sim}9.0mg/kg$, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.87-95
• /
• 2002

The slow degradation rate of sludge in anaerobic digestion is due to rate-limiting step of sludge hydrolysis. To upgrading of sludge hydrolysis and biodegradabiliry, the pre-treatment had been carried out using acidlc (pH 1.5, 3, 4, 5) and alkaline (pH 9, 10, 13), thermal (50, 100, 150, $200^{\circ}C$), and ultrasonic treatment (400W, 20kHz, 15, 20, 25, 30, 40, 50, 60, 90min). In the best conditions of each treatment, the Soluble SCOD Ratio(%)of treated/untreated sample were increased 102% in acid (pH5), 986% in alkali (pH 13), 595% in thermal ($200^{\circ}C$) and 1123% in ultrasonic (35min) treatment. As the result, the ultrasonic treatment was most effective, followed by alkali, thermal, acid treatment. In the effects of total gas productivity in vial test, the thermal ($200^{\circ}C$) pre-treatment was the highest, followed by thermal ($150^{\circ}C$), ultrasonic (90min), alkaline (pH 9), and ultrasonic (50min). We compared untreated samples and the most efficient pre-treatment samples(at $200^{\circ}C$, for 30min) on gas productivity with changes of HRT in continuous experiments IN thermal treated samples were 2.5 times in SCOD, 2 times in soluble protein and 3.3 times high in soluble carbohydrate than untreated ones. In gas productivity, the thermal treated samples were average 2 times high than untreated ones. And HRT 7 days was most effective. followed by HRT 10, HRT 15 days. But The gas productiviry of HRT 2.5 days was less than untreated, the reason of low gas productivity was come from high organic acids accumulation within reactor.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.382-387
• /
• 2014

The PC/ABS blends were manufactured with high shear rate processing. Changes of the blend morphology were analyzed according to the screw speed and processing time. To find optimal conditions of the high shear rate processing of the PC/ABS blend, blend morphology and size of the dispersed phase, ABS, were observed with a SEM. Also, tensile properties of the PC/ABS blends were measured to investigate the effect of the high shear rate process with the screw speed of 500 rpm to 3000 rpm for processing times of 10s to 40s. Especially, to observe the dispersed phase of the PC/ABS blend clearly, fracture surfaces of the PC/ABS blend were etched with chromic acid solution. As screw speed and processing time increase, dispersed phase size of the PC/ABS blend decreases and mechanical properties of the blend decrease as well. Especially, at screw speed over than 1000 rpm of high shear rate processing, mechanical properties of the PC/ABS blends decrease drastically due to the degradation of the blend during the high shear rate processing. Consequently, the optimal condition of screw speed of the high shear processing of the PC/ABS blend is set at 1000rpm, in this study. Under optimal condition, the PC/ABS blend has relatively high mechanical properties with the relatively stable micro-structure having nanometer scale dispersed phase.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.19-29
• /
• 1994

A large volume of paper mill sludge(PMS) is produced every day from paper industries after treatments of waste water and it costs too much to dispose of the sludge. Since PMS consists mostly of biodegradable organic matter, cellulose, it is desirable to recycle it by proper treatments such as composting. In this study, experiments were conducted using a small scale reactor(12l) to establish optimum conditions for efficient composting of PMS of which initial pH, C/N ratio, and moisture content were 7.1, 28~30, and 60~65%, respectively. No heavy metals such as mercury, cadmimum, and lead were not detected in the PMS. Various levels of forced aeration, 1 minute aeration per every 30, 60, 120, 240, and 480 minutes were applied and 1 minute aeration per 60 and 120 minutes found to be proper for composting of 8l PMS in this system. Relationship between $CO_2$ production and temperatures was positively correlated with r> 0.82 suggesting that the normal decomposition of PMS by microorganisms occurred. However, under the condition of aeration interval over than 240 minutes, a negative relationship between two parameters was found indicating the occurrence of abnormal(maybe anaerobic) degradation. The amount of added nitrogen also affected composting of PMS resulting in the increase of $CO_2$ production and temperature. Semi-field tests using 100kg PMS in a static pile sysem showed that PMS could be composted efficiently under optimal environmental conditions. The parameters determining efficiency of composting such as C/N ratio, aeration, moisture content, and pH need to be monitored.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.303-310
• /
• 1992

Studies on the distribution of nitrogenous compounds, and respiratory oxygen consumption rate were carried out in Masan Bay, Korea where large amount of industrial and domestic wastewaters are discharged. In August 1986 the surface layer was significantly influenced by freshwater input. Below the seasonal pycnocline, an oxygen-deficient condition developed in a large area of Masan Bay. Concentrations of DIN, DON and PN were 735.6, 1261.8 and 48.5 umol/l at the head, and 79.1, 73.0 and 39.5 umol/l at the mouth of the inner Masan Bay, respectively. Phytoplankton carbon production was 2,695 mgC/m$^2$/day at the mouth of inner Masan Bay. Dissolved oxygen contents were lower than 1 ml/l from 3 m depth in inner Masan Bay and from 10 m depth in the outer Masan Bay. The high concentration of ammonium and phosphate in the lower layer suggests the active degradation of organic materials in the bottom waters and leaching from sediments. The ERS activity was 232.1 ul O$_2$/l/h in the surface waters of the innermost part of Masan Bay and respiratory oxygen consumption is likely to proceed at a rate of 442 ml O$_2$/m$^2$/day in the bottom waters of this bay. Nitrate removal rate was estimated to be 0.25 umol/l/day via denitrification in the bottom waters of the Masan Waterway. It is estimated from the ETS activity that, at the mouth of inner Masan Bay, 9.3-10.5% of carbon fixed in the upper layer was decomposed below the themocline.

• Korean Journal of Ecology and Environment
• /
• v.34 no.1 s.93
• /
• pp.54-61
• /
• 2001

Changes in methanogenic pathway at low temperature were studied by incubation experiments of sediment slurries from the littoral zone of Reservoir Paldang. Methane production rates in sediment slurries increased exponentially between $5＾{\circ}C$and $45＾{\circ}C$, reached a maximum rate of $7.4\;nmol\;{\cdot}\;g^{-1}\;{\cdot}\;h^{-1}$ at $45＾{\circ}C$, and then declined to low rate. The shift of incubation temperature from high temperature ($30＾{\circ}C$) to lowtemperature ($15＾{\circ}C$) resulted in a decrease of methane production rate and of hydrogen accumulation rate, and the transient accumulation of acetate concentration. Chlorofarm inhibited perfectly methanogenesis and resulted in the accumulation of hydrogen and acetate as immediate precursors for metltane formation at both incubation temperatures of $15＾{\circ}C$ and $30＾{\circ}C$. In terms of equivalent methane which was calculated from the two intermediary metabolites accumulated in absence of methanogenesis, methane production from acetate was accounted for 14% of total methanogenesis at $30＾{\circ}C$ and 75% at $15＾{\circ}C$, respectively. When the high acetate concentrations above 19 mM were added to sediment slurries, methane production was inhibited at the low temperature ($15＾{\circ}C$) . Our results demonstrate that contribution of acetate on methanogenesis increases at low temperature, but this pathway is inhibited by high concentration of acetate. Therefore acetate-utilizing methanogensis appears to be a key reaction at low temperature, and seems to be one of bottlenecks of the low temperature anaerobic degradation of organic matter in littoral sediments of the reservoir.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.4
• /
• pp.289-295
• /
• 2011

Recently, the number of customers who want natural cosmetics without petroleum originated cosmetic ingredients is increasing over the world, however, there are few natural cosmetics that claim functionality in the products. Because there are few functional cosmetic ingredients from nature and though so, it is very difficult to stabilize the final products manufactured by using those functional cosmetic ingredients in the long period. This study is on stabilization of oleanolic acid, insoluble anti-wrinkle cosmetic ingredients from nature, with hydrogenated lecithin in the solubilization product, aiming for developing a formulation of solubilization products which can be certified as organic cosmetics. In case of other synthetic solubilizers, they showed unstability at $45^{\circ}C$ within 2 ~ 3 days, however, for natural origin hydrogenated lecithin a stable product was made without particle size change during 4 weeks. The stability of oleanolic acid in the solubilization product was measured for 24 weeks at $25^{\circ}C$ and $40^{\circ}C$, both samples showed over 90 wt% value of the initial one, which can prove that oleanolic acid was stabilized in the product without any degradation. Also through clinical tests, the effect of moisturizing, anti-wrinkle, safety were confirmed.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.959-970
• /
• 2000

A laboratory-scale experiment was conducted to investigate the effect of soluble microbial products(SMP) on permeate flux in the submerged membrane separation activated sludge process. Continuous and batch filtration test were operated to understand mechanism of relationship between membrane fouling and SMP. Synthetic wastewater(phenol) was used as a carbon source. Hydraulic retention time(HRT) and mixed-liquor volatile suspended solids(MLVSS) of the reactor were kept at 12 hours and 9.000mg VSS/L, respectively. Batch filtration tests ($J_{60}/J_o$) using the mixed liquor from reactor showed that the increase of accumulated SMP concentration in the reactor caused to the decreasing permeate flux and the increasing of the adhesion matters which form cake and gel layer. The resistance value of cake layer was measured $2.9{\times}10^{10}{\sim}4.0{\times}10^{10}(1/m)$, this value showed more significant effect on flux drop than that of among other resistance layers. Batch phenol-degradation experiment was conducted to observe SMP type expected $SMP_{nd}$ and $SMP_{e}$ (SMP resulted from endogenous cell decomposition), these are non-biodegradable high molecular weight organic matter and playa significant role in permeate flux drop. Also, SMP concentration was accumulated as increased of HRT against flux drop.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.54-62
• /
• 1999

2,4-Dichlorophenol was known pollutants caused by the endocrine disruptor into the refractory substances of environment and this is difficult to be degradable by conventional methods. Therefore, a considerable interest has been devoted to developing new process where 2,4-Dichlorophenol can easily decomposed. In this study, the series of ultrasonic irradiation for removal of 2,4-Dichlorophenol has been selected as a model reaction in the batch reactor system in order to obtain the basic data investigate the influence of various experimental parameters such as concentration, pH, reaction temperature, acoustic intensity. The products obtained form the ultrasonic irradiation were analysed by GC/MS and HPLC. The formation of $H_2O_2$, a well-known the strong oxidant was found proportionally to increase with irradiation time. The intermediates of ultrasonic irradiation of 2,4-Dichlorophenol were identified as HCl, catechol, hydroquinone, o,p-benzoquinone, muconic acid, and maleic acid. The final products of this was $CO_2$ and $H_2O$. As the decomposition of 2,4-Dichlorophenol proceeds by the ultrasonic irradiation, the pH of 2,4-Dichlorophenol containing aqueous solution increases slowly, The decomposition of 2,4-Dichlorophenol was found to be occured fast in the basic medium. In general, the rate of reaction is proportional to the reaction temperature obeying the Arrhenius' law. However, in the ultrasonic irradiation, this suggests as the reaction temperature increase the decomposition rate of the reactant decreases. This result meant that the increase of reaction temperature due to the increase of vapor pressure of water accelerated the decrease of acoustic intensity which was can be proportional to the decomposition rae of these compounds. It was found that more than 80% of phenol solution was removed within hours in all reaction conditions. The reaction order in the degradation of the 2,4-Dichlorophenol compounds was verified as the Pseude-first order. From the fore-mentioned results, it can be concluded that the refractory organic compounds caused by endocrine disruptor as 2,4-dichlorophenol could be removed by the ultrasonic irradiation with radicals, such as $H{\;}{\cdot}{\;}and{\;}OH{\;}{\cdot}$ radical causing the high increase of pressure and temperature. Finally, it apeared that the technology using ultrasonic irradiation can be applied to the treatment of refractory substances caused by endocrine disruptor which are difficult to be decomposed by the conventional methods.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2005

[ $TiO_2$ ] was deposited by DC magnetron sputtering on glass surface under various sputtering parameters such as discharge power($0.6{\sim}5.2\;kW$, substrate temperature($R.T{\sim}350^{\circ}C$), Ar and $O_2$ flow ratio with $0{\sim}50\;sccm$($Ar+O_2$ 90 sccm) and about 1 mtorr of pressure. TiO-N thin film was prepared under same sputtering conditions for $TiO_2$ thin film except flow ratio($Ar+O_2+N_2$ 90 sccm). The sheet resistance of thin films deposited under these parameters was measured to analyze electronic characteristic and thin film's thickness(${\alpha}$-step), surface roughness(AFM) and formation construction(FE-SEM, XRD) were also measured to draw optimal sputtering parameters. In order to evaluate photo-activity of thin film($TiO_2$, TiO-N) made in optimal parameters for removal of pollutants, toluene among VOCs and Suncion Yellow among reactive dyes were chosen to probe organic compounds for photo-degradation. It was shown that the photo-catalytic thin films had a significant photo-activation for the chosen contaminants and especially TiO-N thin film showed maximum efficiency of 33% for toluene(5 ppm) removal in visible-light range.