• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.31-32
• /
• 2010

In our previous reports [1-3], electron transport for the switching and memory devices using alkyl thiol-tethered Ru-terpyridine complex compounds with metal-insulator-metal crossbar structure has been presented. On the other hand, among organic memory devices, a memory based on the OFET is attractive because of its nondestructive readout and single transistor applications. Several attempts at nonvolatile organic memories involve electrets, which are chargeable dielectrics. However, these devices still do not sufficiently satisfy the criteria demanded in order to compete with other types of memory devices, and the electrets are generally limited to polymer materials. Until now, there is no report on nonvolatile organic electrets using nano-interfaced organic monomer layer as a dielectric material even though the use of organic monomer materials become important for the development of molecularly interfaced memory and logic elements. Furthermore, to increase a retention time for the nonvolatile organic memory device as well as to understand an intrinsic memory property, a molecular design of the organic materials is also getting important issue. In this presentation, we report on the OFET memory device built on a silicon wafer and based on films of pentacene and a SiO2 gate insulator that are separated by organic molecules which act as a gate dielectric. We proposed push-pull organic molecules (PPOM) containing triarylamine asan electron donating group (EDG), thiophene as a spacer, and malononitrile as an electron withdrawing group (EWG). The PPOM were designed to control charge transport by differences of the dihedral angles induced by a steric hindrance effect of side chainswithin the molecules. Therefore, we expect that these PPOM with potential energy barrier can save the charges which are transported to the nano-interface between the semiconductor and organic molecules used as the dielectrics. Finally, we also expect that the charges can be contributed to the memory capacity of the memory OFET device.[4]

• 한국토양비료학회지
• /
• 제48권6호
• /
• pp.751-760
• /
• 2015

Management of renewable organic resources is important in attaining the sustainability of agricultural production. However, nutrient management with organic resources is more complex than fertilization with chemical fertilizer because the composition of the organic input or the environmental condition will influence organic matter decomposition and nutrient release. One of the most effective methods for estimating nutrient release from organic amendment is the use of N mineralization models. The present study aimed at parameterizing N mineralization models for a number of organic amendments being used as a nutrient source for crop production. Laboratory incubation experiment was conducted in aerobic condition. N mineralization was investigated for nineteen organic amendments in sandy soil and clay soil at $20^{\circ}C$, $25^{\circ}C$, and $30^{\circ}C$. N mineralization was facilitated at higher temperature condition. Negative correlation was observed between mineralized N and C:N ratio of organic amendments. N mineralization process was slower in clay soil than in sandy soil and this was mainly due to the delayed nitrification. The single and the double exponential models were used to estimate N mineralization of the organic amendments. N mineralization potential $N_p$ and mineralization rate k were estimated in different temperature and soil conditions. Estimated $N_p$ ranged from 28.8 to 228.1 and k from 0.0066 to 0.6932. The double exponential model showed better prediction of N mineralization compared with the single exponential model, particularly for organic amendments with high C:N ratio. It is expected that the model parameters estimated based on the incubation experiment could be used to design nutrient management planning in environment-friendly agriculture.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.269-272
• /
• 1996

The electrochemical behavior of Ru complex and PD complex monolayer, deposited on conductive substrate by the Langmuir-Blodgett(LB) technique as monolayer and multilayer, has been studied by cyclic voltammetry. Monolayer films show stable reversible state. Atomic resolution imaging of LB highly-conductive, environmently stable organic films has been obtained by atomic force microscopy (AFM) showing their closely packed structure,

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 추계학술발표대회 논문집
• /
• pp.195-196
• /
• 2004

Fractal geometry based upon the latest complex theory shows different features of design pattern quite different from the past. It is not yet sure which kind of effects it would bring about in the future, we think that it would help to create various spaces and organic design vision. Therefore we will look into the significances and adaptabilities in space design by studying fractal design principles of today's new model in space design

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.2059-2062
• /
• 2012

• 한국토양비료학회지
• /
• 제47권2호
• /
• pp.133-139
• /
• 2014

Veterinary antibiotics (VAs) in animal compost and organic fertilizer can have adverse effect on ecosystem and eventually human health. The main purpose of this research was to evaluate feasibility of Charm II system for monitoring residuals of VAs in animal compost and organic fertilizer. Four different VAs (Tetracyclines: TCs, Sulfonamides: SAs, Macrolides: MLs, and ${\beta}$-lactams: ${\beta}$-LTs) were analyzed and total of 100 samples were monitored. Results reveled that SAs in animal compost showed the highest detection frequency (64%) with exceeded concentration of criteria. However, very low detection frequency (0-12%) for ${\beta}$-LTs was observed in animal compost and organic fertilizer. Depending on physicochemical properties of each VAs, detection frequency of VAs was determined. In conclusion, charm II system can be utilized to screen if residual of VAs is in animal compost and organic fertilizer. Also, more research is necessary to establish standard method for analysis of VAs in complex matrix and to minimize adverse effect of VAs from source to environment.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.179-187
• /
• 2020

Electrodialysis has been applied for treatment of industrial wastewater including metal electroplating. The wastewater from metal plating industries contains high concentrations of inorganics such as copper, nickel, and sodium. The ions in the feed were separated due to the electrical forces in the electrodialysis. The concentrate compartment is exposed to the elevated concentrations of the ions and yielded inorganic precipitations on the cation exchange membranes. The presence of organic matter in the metal plating wastewater affects complex interfacial reactions, which determines characteristics of inorganic scale fouling. The wastewater from a metal plating industry in practice was collected and the inorganic and organic compositions of the wastewater were analyzed. The performance of electrodialysis of the raw wastewater was evaluated and the effects of adjusting pH of the raw water were also measured. The integrated processes with neutralization and electrodialysis showed great removal of heavy metals sufficient to discharge to aquatic ecosystem. The organic matter in the raw water was also reduced by the neutralization, which might enhance removal performance and alleviate organic fouling in the integrated system.

• BMB Reports
• /
• 제53권7호
• /
• pp.349-356
• /
• 2020

Mass spectrometry (MS) is an ideal tool for analyzing multiple types of (bio)molecular information simultaneously in complex biological systems. In addition, MS provides structural information on targets, and can easily discriminate between true analytes and background. Therefore, imaging mass spectrometry (IMS) enables not only visualization of tissues to give positional information on targets but also allows for molecular analysis of targets by affording the molecular weights. Matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) MS is particularly effective and is generally used for IMS. However, the requirement for an organic matrix raises several limitations that get in the way of accurate and reliable images and hampers imaging of small molecules such as drugs and their metabolites. To overcome these problems, various organic matrix-free LDI IMS systems have been developed, mostly utilizing nanostructured surfaces and inorganic nanoparticles as an alternative to the organic matrix. This minireview highlights and focuses on the progress in organic matrix-free LDI IMS and briefly discusses the use of other IMS techniques such as desorption electrospray ionization, laser ablation electrospray ionization, and secondary ion mass spectrometry.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.129-132
• /
• 2000

Perdeuterated hexaflouroacetyIacetonato-ytterbium $[Yb(HFA-D)_3]$ complexes were synthesized by the keto-en01 tautomerism reaction of $Yb(HFA-D)_3$ in methanol-$d_4$ in order to reduce the radiationless transition to the ligands. The luminescence properties of $Yb(HFA-D)_3$ complex were measured in the following anhydrous deuterated organic solvents ; Acetone-$d_6$, Methanol -$d_4$, THF-$d_6$, PO$(OHC_3)_3$ and DMSO-$d_6$. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-$d_6$ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-$d_6$ might be the most appropriate solvent for the liquid laser material of $Yb(HFA-D)_3$ complex.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.980-983
• /
• 2002

We investigated the effect of quinolate metal complex layer as an electron injection layer on the performance of OLEDs and optimized the device efficiency by varying from 0.5 to 10nm thickness of Liq layer. OLED with a structure of indium tin oxide/$\alpha$-napthylphenylbiphenyl(NPB,40nm)/tris-(8-hydroxyquinoline)aluminum(Alq3, 50nm)/Aluminum(150nm) were fabricated in sequence. The device with 1nm Quinolate metal complex layer showed significant enhancement of the device performance.