• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.48-52
• /
• 2006

A mixed adsorbent prepared by pyrolysing a mixture of carbon and flyash in 1:1 ratio was tested for its deceleration ability for three different classes of dyes, namely Astrazone Blue FRR(C.I. Basic Blue 69), Teflon Blue ANL(C.I. Acid Slue 125) and Verofix Red(Reactive Red 3GL). Equilibrium investigations were carried out at the optimum conditions obtained in the previous studies. The equilibrium data fitted reasonably well to both the Freundlich and Langmuir adsorption models. However the Langmuir model was more appropriate to describe the adsorption behavior of the dyes to the hybrid absorbent system compared with the Freundlich model. The mixed adsorbent cm be an low-cost alternative to activated carbons.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.42-47
• /
• 2006

A mixed adsorbent prepared by pyrolysing a mixture of carbon and flyash in 1:1 ratio was tested for its deceleration ability for three different classes of dyes namely, Astrazone Blue FRR(Basic Blue 69), Teflon flue ANL(Acid Blue 125) and Verofix Red(Reactive Red 3GL). Kinetic analyses were carried out at the optimum conditions obtained by the author in the previous studies. The data was fitted with three kinetic model equations. The results showed that the dye uptake mechanism followed the second-order rate expression.

• Korean Membrane Journal
• /
• 제2권1호
• /
• pp.48-55
• /
• 2000

In order to improve organic vapor separation efficiency of polydimethylsiloxane (PDMS) membrane, various zeolites (zeolite 4A, zeolite 13X and natural zeolite) were introduced into a thin PDMS film. The measurements of permeability and selectivity of zeolite-filled PDMS membranes were carried out with a CO$_2$gas and a CO$_2$gas/acetic acid vapor mixture, respectively. The CO$_2$permeability of zeolite-filled membranes decreased with increasing zeolite content and then recovered up to 30 wt% content. The effect of zeolite type on the improvement of CO$_2$permeability was found to be in the order of zeolite 13X > natural zeolite > 4A. The CO$_2$selectivity of zeolite-filled membranes was enhanced up to 9 times compared with the selectivity of a pure (unfilled) PDMS membrane. The effect of zeolite type on the improvement of CO$_2$selectivity was found to be in the order of natural zeolite > zeolite 13X > zeolite 4A.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1571-1572
• /
• 2009

Polymer solar cells were fabricated with gravure printing process and the effect of thermal annealing of gravure printed organic layer was investigated. The layer structure of polymer solar cells is glass / ITO / hole transfer layer / active layer / Al structure was fabricated. For the active layer, 1:1 ratio of poly-3-hexylthiophene (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM) mixture was applied. The P3HT/PCBM blend was gravure printed onto the substrates. The effect of thermal annealing was investigated by changing annealing time and the number of printing. Maximum 3.6% of power conversion efficiency was achieved with gravure printing of organic layer and thermal annealing in this work.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.901-906
• /
• 2009

Several aromatic optically active polyamides (PA)s were synthesized from 5-(2-phthalimidiylpropanoylamino)isophthalic acid with various aromatic diamines via direct polycondensation with triphenyl phosphite and pyridine in the presence of calcium chloride and N-methyl-2-pyrrolidone under microwave irradiation and conventional heating conditions. Under the optimized conditions, the reaction mixture was irradiated for 2 min. with a 100% irradiation power (900 W). The resulting polymers were obtained in high yield and moderate inherent viscosity ranging from 0.35 to 0.60 dL/g. All synthesized polymers showed excellent solubility in amide-type solvents. Thermogravimetric analysis revealed a 10% weight loss temperature and char yield at $600^{\circ}C$ in a nitrogen atmosphere of > $350^{\circ}C$ and > 58%, respectively, which suggests that the resulting PAs have good thermal stability.

• 약학회지
• /
• 제13권2_3호
• /
• pp.84-87
• /
• 1969

Microanalysis of organic sulfur compounds by means of combining thin layer chromatography and oxygen combustion flask method was attempted. The following procedure was found to be very simple and to give accurate results. The mixture of sulfa drugs was separated with T.L.C., and it was burned in a flask filled with oxygen, and the gas formed was absorbed in a dilute solution of sodium hydroxide. The solution was neuralized with hydrochloric acid and heated in a water bath. The sulfate ion formed was then treated with barium chromate solution and its absorbancy at 370 m.mu. was measured.

• Food Science and Biotechnology
• /
• 제14권4호
• /
• pp.461-465
• /
• 2005

To determine the cause of wet noodle spoilage, microorganisms isolated from wet noodles were identified and characterized. In addition, the growth inhibitory effects of organic acid mixture (OA: lactic acid 27.8%, acetic acid 12.0%, succinic acid 1.0%) and sodium dehydroacetate (SD) on the isolated strain were estimated in nutrient broth medium. The isolated strain was Gram-positive, rod shaped, motile, and spore forming. Based on physiological characteristics and the API 50 CHB-kit test results for the assimilation of 49 carbohydrates, the isolated strain was identified as Bacillus amyloliquefaciens (92.6%), which is able to degrade starch. Decimal reduction times (D-values) at 100, 105, and $110^{\circ}C$ for spores of B. amyloliquefaciens were 8.5, 5.1, and 2.5 min, respectively, and the z-value was $12.8^{\circ}C$. We estimated that B. amylo-liquefaciens isolated from spoiled wet noodles was a thermophilic species having high heat-resistance. Viable cell numbers in wet noodles and broth medium inoculated with B. amyloliquefaciens were decreased by 2-4 log cycles by combined treatment with 0.03 or 0.05% OA and 0.3% SD. These results revealed that OA combined with SD could be used as a potential agent to inhibit B. amyloliquefaciens in wet noodles.

• 자원리싸이클링
• /
• 제27권6호
• /
• pp.53-58
• /
• 2018

염산농도가 낮은 용액에서 TBP/MIBK와 다른 중성추출제(Cyanex 923, TOPO, TOP)의 혼합용매에 의한 리튬(I)의 용매추출실험을 수행했다. 0.1 M의 $FeCl_3$가 추출된 TBP/MIBK는 염산농도를 1에서 9 M로 변화시켜 준비하였다. 약한 염산용액에서 리튬(I)의 추출은 유기상에서 $FeCl_3$의 안정도와 관계된다. $FeCl_3$가 추출된 TBP를 진한 염산용액에서 제조하는 경우, 추출시 철의 탈거율이 작아 리튬(I)이 수소이온과의 교환반응에 의해 추출되었다. 혼합용매에서 TBP의 농도도 $FeCl_3$의 안정에 영향을 미쳤다. TBP에 비해 $FeCl_3$는 MIBK로부터 쉽게 탈거되어 리튬(I)을 추출하지 못했다. TBP/MIBK와 혼합용매로 첨가된 중성추출제의 종류는 리튬(I)의 추출과 철의 탈거에 영향을 미치지 않았다.

• 한국유기농업학회지
• /
• 제19권3호
• /
• pp.417-425
• /
• 2011

본 실험에서는 유기재배 농가에서 사용되고 있는 액비의 특성을 과학적으로 구명하고자 발효기간 동안 액비의 화학성, 미생물상의 변화, 그리고 액비 처리가 무 생육에 미치는 효과를 조사하였다. 액비의 pH는 발효가 진행됨에 따라 7.2에서 4.3로 감소하였고 EC는 액비제조 직후 13.9 dS/m에서 계속 상승하여 70일에는 99.3 dS/m에 도달하였다. 액비내 서식하는 세균 밀도는 발효 과정 중 $8.2{\times}10^5$ cfu/ml에서 $3{\times}10^4$ cfu/ml로 감소하였으며, Bacillus 속은 제조 직후 $2.1{\times}10^2$ cfu/ml에서 $4.2{\times}10^3$ cfu/ml로 발효가 진행됨에 따라 증가하는 경향을 보였다. 액비로부터 분리한 세균은 지방산 분석을 통한 동정 결과, 발효가 진행될수록 Bacillus 유사속들이 액비내 우점하는 것을 알 수 있었으며 DGGE profile을 통해 발효과정 동안 액비내 미생물 군집의 변화를 확인하였다. 액비처리에 의한 무 유묘 생육을 살펴본 결과, 줄기보다는 뿌리 발달을 촉진하였다.

• 대한환경공학회지
• /
• 제34권1호
• /
• pp.49-54
• /
• 2012

본 연구에서는 수 환경 내에서 일어나는 주요 자연분획변환 과정 중 생분해 시 변화하는 용존 유기물질의 특성이 중금속 결합특성에 미치는 영향을 조사하고자 하였다. 각각 호수와 하천 기원을 대표하는 Pony lake fulvic acid와 Suwannee river fulvic acid를 포함한 다양한 유기물을 대상으로 2주간 배양실험을 하여 변화하는 농도, 성상 및 중금속 구리 결합특성을 조사한 결과 각 시료 내 DOC농도는 감소하고 SUVA 값은 증가하였다. 특히 포도당 및 단백질계 탄소구조 함유비율이 높을수록 미생물에 의한 DOC 농도 분해율은 증가하였다. 포도당과 휴믹물질의 혼합비를 고려한 경우 배양 후 예측되는 혼합액의 DOC 감소율은 실제 측정값과 유사하였다. 그러나 SUVA값은 오히려 더 높게 나타나 생분해성 물질과 휴믹물질이 혼재할 경우 탄소 구조 변화로 인한 휴믹화의 진행이 더 크게 나타날 수 있음을 보였다. Synchronous 형광스펙트럼 결과 배양 후 Pony lake fulvic acid의 경우 휴믹산계 형광특성이, Suwannee river fulvic acid에서는 펄빅산계 형광특성이 크게 증가하였다. 포도당 시료에서는 배양 전 관찰되지 않았던 단백질계와 펄빅산계 형광특성이 관찰되었다. 중금속 구리와의 결합정도를 나타내는 log K 값은 미생물 배양 전과 후 휴믹물질 종류에 따라 변화가 없거나 혹은 약간 감소하는 경향을 나타냈다. 본 실험 결과는 미생물에 의한 휴믹물질 관련 형광구조의 증가가 중금속 결합력 강화에 영향을 미치지 않거나 오히려 감소시키는 것으로 보인다.