• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.519-524
• /
• 2013

pH buffer capacities (pHBC, $cmol_c\;kg^{-1}\;pH^{-1}$) of 6 residual Entisols derived from granite, granite-gneiss, limestone, sandstone, shale, and basalt in Korea were studied. Soil acidity may become a problem if the soil pH is reduced to critical levels when nutrient cycles are unbalanced (especially N, C and S). The relation between the pHBC and the physico-chemical properties of the 6 soils was also studied. In the A horizons of all the soils except Euiseong series developed from sandstone, the contents of clay, organic matter and cation exchange capacity (CEC) were higher than those of C horizon, but bulk density and pH were lower than C horizon. Clay content of Euiseong series decreased with soil depth, which might be caused by the elluviation. The soils developed from granite, granite-gneiss and sandstone have a higher $SiO_2$ content than those developed from basalt and limestone. The contents of $Fe_2O_3$ and MgO were high in the soils from developed from basalt, limestone and shale comparing with the soils from granite, granite-gneiss and sandstone. The soils from basalt and limestone showed higher values of ignition loss than those from the other parent rocks. The pHBC of the soils was ranged from 1.8 to 3.2 $cmol_c\;kg^{-1}\;pH^{-1}$ showing as follows : basalt, limestone > shale, granite-gneiss > granite sandstone.

• Food Science of Animal Resources
• /
• v.35 no.4
• /
• pp.466-472
• /
• 2015

A rapid and simple analytical method, using liquid chromatography tandem mass spectrometry (LC-MS/MS), was developed to detect myo-inositol (MI) in infant formulas. For protein removal: acid hydrolysis and lipid removal through organic solvent extraction. The operating conditions for instrumental analysis were determined based on previously reported analogous methods that used LC-MS/MS. Quantitative analysis was used for the detection limit test, infant formula recovery test, and standard reference material (SRM) 1849a to verify the validity of our LC-MS/MS analytical method, which was developed to quantify MI. For validation, the results of our method were compared with the results of quantitative analyses of certified values. The test results showed that the limit of detection was 0.05 mg/L, the limit of quantitation was 0.17 mg/L, and the method detection limit was 17 mg/kg. The recovery test exhibited a recovery between 98.07-98.43% and a relative standard deviation between 1.93-2.74%. Therefore, the result values were good. Additionally, SRM 1849a was measured to have an MI content of 401.84 mg/kg and recovery of 98.25%, which is comparable to the median certified value of 409 mg/kg. From the aforementioned results, we judged that the instrumental analysis conditions and preparation method used in this study were valid. The rapid analytical method developed herein could be implemented in many laboratories that seek to save time and labor.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.53-59
• /
• 2003

Phosphogypsum is a by-product resulting from the phosphoric acid process for manufacturing fertilizers. It consists mainly of $CaSO_4{\cdot}2H_2O$ and contains some impurities such as $P_2O_5$, $F^-$, and organic substances. Recycling research of phosphogypsum is very limited to a field of study, especially, civil engineering. This study describes an application of phosphogypsum as dredged materials. For this purpose, experiments are performed to evaluate the physicochemical properties and environmental characteristics of dredged clay with phosphogypsum ; sedimentation test, pH, and leaching test. The result of this study are as follows : the settling velocity is increased due to the activity of phosphogypsum. And leaching and radioactive test results are far below than those of regulatory requirement of Waste Management Act in Korea. Therefore phosphogypsum can be used as dredged materials in reclamation.

• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.70-73
• /
• 2018

To determine the optimum amount of spent oyster mushroom substrate (SOMS) for use in cultivation of Lentinula edodes, the chemical properties of the substrate and culture conditions of Lentinula edodes were investigated. Replacing 20-50% of a sawdust substrate with SOMS yielded a C/N ratio of 62-76. In case of substrates containing SOMS, the total nitrogen and phenolic contents of were higher, whereas fructose and organic acid contents were lower than those of the control substrate. Cultivation tests showed that the 3-cycle yield of 20% SOMS treatment was 286.7 g, similar to that of the control, while 50% SOMS treatment significantly decreased the yield. In conclusion, development of oak mushroom substrate using SOMS would recycle waste products and decrease material costs.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.53-53
• /
• 2011

Poly(lactic acid)(이하 PLA라 칭함)는 1970-80년대의 초기 연구에서는 높은 제조비용과 희귀성에 의해 봉합사와 약물전달시스템으로 용도가 제한적이었으나 1980년대를 거쳐 1990년 이후 농업의 혁신적인 변화를 거쳐 옥수수의 다양한 측면의 이용의 하나로서 6-7년 전부터 양산화에 성공하여, 의류, 필름 및 플라스틱의 여러 가지 분야에서 적용가능성을 모색하고 있다. PLA의 장점은 석유가 아닌 천연 원료에서 얻을 수 있으며, 기존의 합성섬유와는 달리 일정한 조건하에서 미생물 등에 의해 물과 이산화탄소로 90% 이상 분해되는 친환경적인 소재이다. 합성섬유에서 의류용으로 대부분 사용되는 폴리에스테르(이하 PET라 칭함)와 유사한 물성을 가지고 있는 PLA섬유는 PET섬유와 유사한 분산염료로 염색할 수 있다. 따라서 PLA섬유는 분산염료에 의한 염색법을 중심으로 연구되어지고 있으나, PET 섬유의 융점이 $254^{\circ}C$부근인 반면, PLA섬유는 $160-170^{\circ}C$부근이다. 이로 인해 PLA를 섬유로 용도전개에 있어서 약점으로 작용하고 있다. 그러나 PLA섬유는 특유의 경량감과 새로운 촉감 등의 많은 장점을 지니고 있어 여러 가지 용도전개가 되어지고 있다. 초음파는 사람이 들을 수 없는, 사람마다 한계값은 다르지만, 주파수 약 25kHz이상의 음파를 말하며, 주파수가 높고 파장이 짧기 때문에 강한 진동을 수반한다. 초음파의 이용 원리는 Cavitation이라는 현상으로 생성된 기포가 터지면서 강력한 에너지를 방출한다. 이것은 강력하여 사방으로 퍼져 물질표면이나 내부에 영향을 미친다. 섬유에서는 표면에 뭍은 불순물을 제거하는 세정 등에 응용되고 있으며, 염색분야에서도 다양하게 연구되어지고 있다. 본 연구에서는 초음파에 의한 PLA섬유의 염색성을 조사하였다. PLA섬유를 정련하여 초음파작용의 유무에 따라 염색하여 그 결과를 고찰하였다. 초음파 작용에 따른 분산염료의 표면 색변화는 없었으며, 섬유 표면 색 농도의 차이는 초음파 작용에 의하여 저온에서는 차이가 나타나지만, 고온인 $80^{\circ}C$에서는 오히려 낮아졌다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.53-53
• /
• 2012

Poly(lactic acid)(이하 PLA라 칭함)는 초기 연구에서는 제조비용과 희귀성으로 봉합사 등의 의료용 등의 용도가 제한적이었으나 1980년대의 유전공학의 발전과 이를 바탕으로 1990년 이후 농업의 혁신적인 변화를 거쳐 옥수수의 여러 측면의 이용 중의 하나로서 2000년 초에 양산화에 성공하여, 의류, 필름 및 플라스틱의 다양한 분야에서 적용되고 있다. PLA의 장점은 석유가 아닌 천연 원료에서 얻을 수 있으며, 기존의 합성섬유와는 달리 일정한 조건하에서 미생물 등에 의해 물과 이산화탄소로 분해되는 친환경적인 소재이다. 합성섬유 중에서 의류용의 대부분 차지하는 폴리에스테르(이하 PET라 칭함)와 유사한 물성을 가지고 있는 PLA섬유는 PET섬유와 유사한 분산염료로 염색할 수 있다. 따라서 PLA섬유는 분산염료에 의한 염색법을 중심으로 연구되어지고 있으나, PET 섬유의 융점이 $254^{\circ}C$부근인 반면, PLA섬유는 $160-170^{\circ}C$ 부근이다. 이로 인해 PLA를 섬유로 용도전개에 있어서 약점으로 작용하고 있다. 그러나 PLA섬유는 특유의 경량감과 새로운 촉감 등의 많은 장점을 지니고 있어 여러 가지 용도전개가 되어지고 있다. 배트염료는 그 자체로서는 불용성으로 섬유와 친화성이 낮지만, 알칼리성 환원욕에서 셀룰로오스 섬유 등에 친화성이 있다. 화학구조적으로 안트라키논, 인디고계가 주류를 이루고 있으며, 색상적으로는 화학구조의 제약으로 선명도가 약깐 낮은 중간색 계통이 대부분이지만, 견뢰도 면에서는 다른 염료에서는 얻을 수 없는 높은 견뢰도를 가지는 것이 배트염료가 지니는 장점중의 하나이다. 셀룰로오스계 섬유에 주로 이용되는 배트염료를 나일론과 폴리에스테르 중심으로 합성섬유에 적용하는 연구 및 실용화가 되어지고 있다. 본 연구에서는 Indigo Blue 1을 중심으로 염색된 PLA섬유의 반복 세탁에 의한 염색물의 변 퇴색성을 조사하였다.

• Advances in environmental research
• /
• v.4 no.4
• /
• pp.247-262
• /
• 2015

The few lignin biomarker studies conducted in tropical environments are hampered by having to use references signatures established for plants and soils characteristic of the temperate zone. This study presents a lignin biomarker analysis (vanillyls (V), p-hydroxyls (P), syringyls (S), cinnamyls (C)) of the dominant plant species and soil horizons as well as an analysis of the interrelated terrigenous organic matter (TOM) dynamics between vegetation and soil of the $Tapaj{\acute{o}}s$ river region, an active colonization front in the Brazilian Amazon. We collected and analyzed samples from 17 fresh dominant plant species and 48 soil cores at three depths (0-5 cm, 20-25 cm, 50-55 cm) from primary rainforest, fallow forest, subsistence agriculture fields and pastures. Lignin signatures in tropical plants clearly distinguish from temperate ones with high ratios of Acid/aldehyde of vanillyls ((Ad/Al)v) and P/V+S. Contrary to temperate environments, similarly high ratios in tropical soils are not related to TOM degradation along with pedogenesis but to direct influence of plants growing on them. Lignin signatures of both plants and soils of primary rainforest and fallow forest clearly distinguish from those of non-forested areas, i.e., agriculture fields and pastures. Attalea speciosa Palm trees, an invasive species in all perturbed landscapes of the Amazon, exhibit lignin signatures clearly distinct from other dominant plant species. The study of lignin signatures in tropical areas thus represents a powerful tool to evaluate the impact of primary rainforest clearing on TOM dynamics in tropical areas.

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.73-79
• /
• 2013

The allyl isothiocyanate, capsaicin and dihydrocapsaicin as main components in self defense sprays were determined by gas chromatography-mass spectrometer (GC-MS). Although self defense spray was used to protect by myself, a social problem could be caused by the hazard of spray chemical due to use pungent liquid. To identify this, the pH of pungent liquid solutions, solubility to detergents, the existence of other materials and the types and amounts of pungent material in spray chemicals were investigated in this work. Finally, the amounts of allyl isothiocyanate, capsaicin and dihydrocapsaicin as pungent materials in them were determined by GC-MS. The pH of chemicals were about 5.7 as weak acid, the detergents can emulsify them with water well. And they did not contain fluorescent materials and hazard organic solvents. The pungent components in three real samples were only allyl isothiocyanate [47,600 mg/kg (47.6%)] in one sample, and mixtures with capsaicin [228 mg/kg~368 mg/kg (1.14%~1.84%)] and dihydrocapsaicin [224 mg/kg~414 mg/kg (1.12%~2.07%)] in the others, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.2
• /
• pp.75-83
• /
• 1990

An experiment was conducted with three ruminally and intestinally cannulated non-lactating cows of Finnish Ayrshire breed, to assess the ruminal degradation characteristics of oat (Avena sativa), rye (Secale cereale) and rice (Oryza sativa) straw by the nylon bag technique, and the subsequent post-ruminal degradation of their rumen-undegraded residues by using the mobile bag technique, respectively. The straw samples were untreated or treated with aqueous $NH_3$ or with urea solution in cold or hot water. The untreated straw samples were milled or chopped, and the treated straw samples were chopped. The constant values a, b, and c were computed according to the exponential equation, where a = intercept of degradation curve at time 0, b = potentially degradable material, c = rate of degradation of band (a+b) = maximum potential degradability (asymptote). It was found that nitrogen contents of chemically treated straw were markedly increased by both $NH_3$ and urea treatments. Milling the samples attributed to a remarkable loss at 0 h incubation time as compared to chopping of the respective samples. However, chemical treatment markedly improved the b value and the subsequent (a+b) values for dry matter, organic matter, neutral-detergent fiber, and acid-detergent fiber of the samples. Furthermore, temperature of the water used in the urea solutions was considered essential, since urea in hot water rather than in cold water seemed to enhance the overall degradability. The disappearance of rumen-incubated straw residues from the mobile bags ranged from 4.5 to 9.6% for the parameters measured. On average, the OM disappearance from bags was clearly higher for the residues of urea treated straw compared to those of ammonia treated straw, but the disappearance of NDF tended, however, to be higher on the ammonia treatment.

• Korean journal of food and cookery science
• /
• v.31 no.2
• /
• pp.144-152
• /
• 2015

The loquat (Eriobotrya japonica) is a plant belonging to the Rosaceae family, native to south-central China. It is cultivated in relatively warm areas such as Spain, Japan and South Korea. It is used commercially as an ornamental plant and for its yellow fruit, which contains much carotenoid, sugar and a little organic acid. In this study, chiffon cakes were prepared with the addition of 3%, 6%, 9% and 12% loquat fruit powder (LFP) in order to invest the mixing conditions. When more LFP was added to the dough, the pH level of the dough became lower. Specific gravity and viscosity of the dough significantly increased as higher amounts of LFP were added. In baked cakes, the weight and baking loss rate of LFP were not significantly different between samples, and the height of the risen test samples were lower than that of the controls. Moisture content was 33.58% in the 12% LFP sample (12% LFPS), which was the highest of all the samples. With respect to crust color, lightness, redness and, yellowness, these significantly decreased as the amount of LFP was increased, the 12% LFP being the lowest of all the samples. Lightness and yellowness of crumbs significantly decreased as the amount of LFP was increased, whereas redness showed the reverse effect. When looking at hardness and adhesiveness, the 12% LFPS was the highest of all the samples, nevertheless a difference in resilience was not significant among the samples. According to consumer perception, bitterness was significantly increased as amounts of LFP increased, however a difference in salty, astringency and oily tastes were not significant among the samples. The 12% LFPS showed the lowest score with respect to softness and overall acceptability. In conclusion, LFP could be considered a functional material, with the optimum amount of LFP for a chiffon cake of 3~9%.