• Journal of the Korean Society of Food Culture
• /
• v.16 no.3
• /
• pp.235-242
• /
• 2001

Chemical properties of the different parts of watercress(Oenanthe javanica D.C.) grown and harvested from the culture fields under different cultivating methods were studied. In proximate analyses of watercress in parts, moisture contained more in stem than in root or in leaf, but crude protein and crude lipid contents were lower in stem than in root or in leaf. Crude ash in root contained up to about double amount in leaf or stem. Major mineral elements detected in watercress were Fe, Mg, Ca, and K, and their contents in root was higher than those in stem or leaf. Especially, Fe in root was significantly higher than that in stem or in leaf. Total free sugar composed mainly with fructose and glucose, was the highest in watercress from Hwasoon and followed the watercress from Jeonju and Donggok in order. Free sugar content was highest in leaf and the lowest in root. Major water-soluble vitamins were vitamin C, thiamin and biotin and the content of vitamin C was higher than others. These vitamins contained more in leaf than in stem or root. Niacin contained 6.09 mg/100 g in leaf of watercress from Hwasoon, which was much higher than others, but it was not detected in stem of watercress from Jeonju. Organic acids detected were oxalic acid, citric acid and malic acid and other 12 organic acids were not detected. In fatty acid composition, there were significant differences among watercresses from different parts and different culture fields. Linoleic acid, linolenic acid and palmitic acid were major fatty acids contained in watercress and it took about 80% of the total content. Amino acid content in leaf was higher than that in root and in stem. Glutamic acid and proline were major amino acids in stem of watercress from Jeonju and in stem of watercresses from Hwasoon and Donggok, respectively. In leaves of all three watercresses glutamic acid content was the highest.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.475-480
• /
• 1999

The chemical components in different parts such as seed, cotyledon, hull, pod, leaf, stem and root of Korean sword bean(Canavalia gladiata) were determined in this study. The contents of total sugar and protein were relatively higher in cotyledon than other parts. The highest mineral component was K, Ca in root and leaf, respectively. In case of organic acids, relatively higher content of oxalic acid(2,556 mg%), citric acid(573 mg%) was found in leaf and pod, respectively. Among free sugars, the contents of sucrose(3.80%), fructose(2.17%) were the highest contents in hull and stem, respectively. The highest component total amino acids in cotyledon and leaf, pod, stem, and root was glutamic acid(592 mg%), glutamic acid(429 mg%), proline(497 mg%), lysine(328 mg%) and arginine(714 mg%), respectively. Among fatty acids in hull and pod, palmitic acid(32.75%, 21.93%) was high in saturated fatty acid fraction, while linoleic acid(39.15%, 43.03%) was high in polyunsaturated fatty acid fraction.

• The Korean Journal of Community Living Science
• /
• v.28 no.2
• /
• pp.203-215
• /
• 2017

This study was carried out to compare the major nutrient components and antioxidant activities of Stachys sieboldii Miq leaf and root powders. For proximate compositions, crude protein and crude fat contents of leaf powder were higher than those of root powder, whereas contents of crude ash and carbohydrates were lower in leaf powder. The content of glutamic acid was greater in amino acids of leaf and root powders, and contents of total amino acids and essential amino acids were higher in leaf powder compared with root powder. Root powder contained a higher level of total unsaturated fatty acids than leaf powder. Total contents of organic acids were higher in leaf powder; tartaric acid was the major organic acid in leaf powder, and malic acid was the major organic acid in root powder. The content of vitamin A was higher in leaf powder than in root powder. However, vitamin E content was higher in root powder than in leaf powder. Total mineral contents of leaf powder were higher than those of root powder, and mineral contents of leaf and root powders were in the order of K>Ca>Mg. Extract yields of leaf and root powders were 27.21% and 58.51%, respectively. Total polyphenols and total flavonoids of leaf extract were 236.35 mg/g and 1.90 mg/g, respectively, which were higher than those of root extract. The $IC_{50}$ values of leaf and root ethanol extracts based on DPPH hydroxyl scavenging were 0.69 mg/mL and 5934.31 mg/mL, respectively, and antioxidative activities of ethanol extracts from all Stachys sieboldii Miq parts dose-dependently increased. These results suggest that Stachys sieboldii Miq can be recommended as an edible functional food material.

• The Plant Pathology Journal
• /
• v.21 no.4
• /
• pp.317-321
• /
• 2005

Since 2000 severe rots on aerial and underground parts of paprika (Capsicum annum L.) has occurred in most surveyed glasshouses throughout the country. A total of 56 isolates of a fungus were consistently isolated from various plant parts such as fruit, stem, branch, and root collected from 16 farms in five provinces. Anamorph stage of the fungus was identified as Fusarium solani based on its morphological characteristics. However, the fungus readily produced a sexual structure of perithecia on infected plant tissues and on agar media. Since the fungus formed abundant perithecium by a single isolate, it was considered as a homothallic strain of Nectria haematococca, the teleomorph of F. solani. Irregularly globose perithecia with orange to red color formed sparsely to gregariously on dead tissues of fruits and basal stems at the late infection stage, which is a diagnostic sign for the disease. Perithecia ranged from 125 to 220 ${\mu}m$ in diameter varied among isolates. Asci enveloping eight ascospores were cylindrical and measured 60-80x8-12 ${\mu}m$. Ellipsoid to obovate ascospores are two-celled and measured 11-18x4-7 ${\mu}m$. Ascospores were hyaline, slightly constricted at the central septum, and revealed longitudinal striations that is characteristic of the species. This fungus that has never been reported in Korea has previously become a threat to paprika cultivation because of its strong pathogenicity and nationwide distribution.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.3
• /
• pp.10-17
• /
• 2013

The organic Rankine cycle has been widely used to convert the renewable energy such as the solar energy, the geothermal energy, or the waste energy etc., to the electric power. Some previous studies focused to find what kind of refrigerant would be a best working fluid for the organic Rankine cycle. In this study, R245fa was chosen to the working fluid, and the cycle analysis was conducted for the output power of 30kW or less. In addition, properties (temperature, pressure, entropy, and enthalpy etc.) of the working fluid on the cycle were predicted when the turbine output power was controlled by adjusting the mass flowrate. The configuration of the turbine was a radial-type and the supersonic nozzles were applied as the stator. So, the turbine was operated in partial admission. The turbine efficiency and the optimum velocity ratio were considered in the cycle analysis for the low partial admission rate. The computed results show that the system efficiency is affected by the partial admission rate more than the temperature of the evaporator.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.242-253
• /
• 2014

Morinda citrifolia, commercially known as Noni, is a tree that grows widely throughout the Pacific, and is recognized as one of the most significant sources of traditional medicines among Pacific Island societies. All parts of the plant have traditional and/or modern uses, including roots and bark(dyes, medicine), trunks(firewood, tools), and leaves and fruits(food, medicine). The bark and the roots of the tree contain red and yellow pigments respectively, which are both used in the manufacture of dyes. Dyes from Noni are being used traditionally, to color clothing and fabrics. In this study, mordanting effects on the dyeing properties of Noni root extract on silk fabrics were investigated.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.1
• /
• pp.12-21
• /
• 2014

An organic Rankine cycle was analyzed to work at the optimal operating point when the heat source is fluctuated. R245fa was adopted as a working fluid, and an axial-type turbine as expander on the cycle was designed to convert the heat energy to the electricity since the turbo-type expander works at off-design points better than the positive displacement-type expander. A supersonic nozzle was designed to increase the spouting velocity because a higher spouting velocity can produce more output power. They were designed by the method of characteristics for the operating fluid of R245fa. Three different cases, such as various spouting velocities, various inlet total temperatures, and various nozzle numbers, were studied. From these results, an optimal operating cycle can be designed with the organic Rankine cycle when the available heat source as renewable energy is low-grade temperature and fluctuated.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.51-57
• /
• 1957

Hydroquinone-formaldehyde resin prepared from hydroquinone, formaldehyde and hydrochloric acid as a catalyst was shown to be oxidized with ferric chloride solution and regenerated by stannous chloride solution. The influence of various conditions of preparation on the capacity of oxidation was studied. Results show that the concentration of a solution of hydroquinone has not any effects below 14 parts of water to 1 part of hydroquinone, by the after-heat-treatment for 5-6 hours at 100-120 deg. C. the capacity of oxidation is exhibited a maximum, and decreased as the mole ratio of hydroquinone to formaldehyde increase. The optimum conditions for the preparation of this resin are as follows: hydroquinone 1 part to distilled water 10 parts, mole ratio of formaldehyde 1.2 to hydroquinone 1, and 5 hours of after-heat-treatment at 120 deg. C. The maximum capacity under the above conditions is 13.99 meq/g-ersin.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.225-226
• /
• 2006

In this present investigation, Metal Injection Moulding (MIM) of M2 High Speed Steel (HSS) parts using a wax-High Density Polyethylene (HDPE) binder is shown. The elimination of organic binder was carried out by thermal debinding under inert atmosphere. In order to keep carbon in the sample that could improve the sintering process, incomplete debinding was performed between 450 and $600^{\circ}C$. The specimens were sintered at temperatures between 1210 and $1280^{\circ}C$ in high vacuum atmosphere, obtaining the 98% of the theoretical density. In the samples with higher residual carbon content, the sintering window was extended up to 20 degrees and the optimum temperature was lower.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.207-208
• /
• 2006

In this experimental work, the development of a multicomponent binder system based on high density polyethylene (HDPE) and paraffin wax for Powder Injection Molding of Alumina $(Al_2O_3)$ parts was carried out. The optimum composition of the injection mixture was established through mixing torque measurements and a rheological study. The maximum powder loading was 58 vol%. The miscibility of organic components and the optimum injection temperature was evaluated by thermal characterization of binder and feedstock. The thermal debinding cycle was developed on the basis of thermogravimetrical analysis of the binder. After sintering the densities achieved were closed to 98% of the theoretical one.