• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.220-227
• /
• 2016

In this paper, polychlorinated biphenyls (PCBs) were measured in surface sediments collected three times (June, October, December, 2013), inside Jeju Harbor as major harbors of Jeju Island. The concentration of PCBs inside Jeju Harbor was in the range of 1.62~4.45 (mean) ng/g on a dry weight basis and the levels were very low. In the analysis of PCBS homologue patterns, high-chlorinated PCB congeners were dominant in surface sediments inside Jeju Harbor, indicating that their sources were originated from shipping activity. In the relationships between PCBs concentrations and particle size (mud, sand and gravel) in surface sediments, PCBs concentrations were higher in the sediments with higher mud content, indicating that higher PCBs were distributed with increasing sediments of fine gradules. The PCBs concentrations in surface sediments in this study were very low, compared with ER-L (effect range-low) and TEL (threshold effects level) among sediment quality guideleines (SQGs) applied in foreign countries, such as USA, Canada, and Australia, etc), indicating that their biological effects on the bottom organisms in marine environment were expected to be very low.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.97-103
• /
• 2014

Among various lead-free solders, the Sn-58Bi solders have been considered as a highly promising lead-free solders because of its low melting temperature and high tensile strength. However, Sn-58Bi solder has the poor ductility. To enhance the mechanical property of Sn-58Bi solder, epoxy-enhanced Sn-58Bi solders have been studied. This study compared the microstructures and the mechanical properties of Sn-58Bi solder and Sn-58Bi epoxy solder with aging treatment. The solders ball were formed on the printed circuit board (PCB) with organic solderability preservative (OSP) surface finish, and then the joints were aged at 85, 95, 105 and $115^{\circ}C$ for up to 100, 300, 500 and 1000 hours. The shear test was conducted to evaluate the mechanical property of the solder joints. $Cu_6Sn_5$ intermetallic compound (IMC) layer grew with increasing aging time and temperature. The IMC layer for the Sn-58Bi epoxy solder was thicker than that for the Sn-58Bi solder. According to result of shear test, the shear strength of Sn-58Bi epoxy solder was higher than that of Sn-58Bi solder and the shear strength decreased with increasing aging time.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.31-36
• /
• 2012

In this study, the complex vibration reliability of Sn-3.5Ag and Sn-0.7Cu having a high melting temperature was investigated. For manufacturing of BGA test samples, Sn-3.5Ag and Sn-0.7Cu balls were joined on BGA chips finished by ENIG and the chips were mounted on PCB finished OSP by using reflow process. For measuring of resistance change during complex vibration test, daisy chain was formed in the test board. From the results of resistance change and shear strength change, the reliability of two solder balls was compared and evaluated. During complex vibration for 120 hours, Sn-0.7Cu solder was more stable than Sn-3.5Ag solder in complex vibration test.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.151-158
• /
• 1999

This study was conducted to measure the residual PCBs in sediments of 4 great rivers in Korea by gas chromatography-mass spectrometry. From the results, PCBs were positively detected in all samples. The residue levels of total PCBs in sediments in near of SS and OS were $290.87{\mu}g/kg$ and $221.11{\mu}g/kg$, respectively. The PCBs contamination may be in association with total organic compound (TOC) in sediments. Congener 66, 74, 90, 101, 105, 110, 118, 138, 149, 153, 180, 187 as IUPAC No were predominant species found in sediments and the polyCBs detected most aboundantly in sediments were tetraCBs and pentaCBs. From the study, it appears that the PCBs contamination in sediments of 4 great rivers is not serious and the analysis from enough many sites is needed for the next survey.

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.282-289
• /
• 1996

2,3-DHBP dioxygenase was purified from E. coli CK1092 carrying the pcbC gene, which was cloned from 4-chlorobiphenyl-degrading Pseudomonas sp. P20. Purification of this enzyme was done by acetone precipitation, DEAE- Sephadex A-25 ion exchange chromatography, and preparative gel electrophoresis. The molecular weight of subunit was 34 kDa determined by SDS-PAGE, and that of native enzyme was about 270 kDa. It suggests that this enzyme consist of eight identical subunits. This enzyme was specifically active against only 2,3-DHBP as a substrate with 18 $\mu$M of Km value, but not catechol, 3-methylcatechol, 4-methylcatechol and 4-chlorocatechol. The optimal pH and temperature of 2,3-DHBP dioxygenase were pH 8.0 and 40-60$\circ$C. The enzyme was inhibited by Cu$^{2+}$, Fe$^{2+}$ and Fe$^{3+}$ ions, and was inactivated by H$_{2}$0$_{2}$2 and EDTA. The lower concentrations of some organic solvents such as acetone and ethanol don't stabilize the activity of 2,3-DHBP dioxygenase. The enzyme was completely inactivated by adding the reagents such as N-bromosuccinimide, iodine and p- diazobenzene sulfonic acid.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.4.1-4.1
• /
• 2011

Recently, circuit printing technology has been considered as a promising alternative to conventional PCB fabrication, for it can greatly reduce the manufacturing costs. Even though printed circuit has many advantages over typical subtractive technology such as fewer processes, it has some disadvantages. The major problems are low adhesion and poor resolution. Efforts to overcome these problems have been mainly focused on ink developments with a limited success. And surface treatments showed some improvements. Therefore, various plasma treatments and primer coatings on plastic substrates have been tested. Plasma treatments using hydrocarbon gases including methane and propane improved the pattern quality of the inkjet printed circuit, which are further improved upon heating of substrate. On the other hand, there is little effect on the adhesion, which is improved only by a special primer coating. The adhesion of inkjet printed circuit has been increased more than 10 times upon treatment. As for the screen printed circuits, the overall effects are less significant since there is some organic binder in the ink. Nonetheless, the treatment has strong positive effects on pattern quality and adhesion. The adhesion of 1 kgf/cm2, which is comparable with those of the conventional PCB circuits, is possible through primer coating for both screen and inkjet printed circuits. The resulting circuit also showed good thermal, mechanical and electrical properties.

• Korean Journal of Metals and Materials
• /
• v.46 no.2
• /
• pp.80-87
• /
• 2008

Many researches related to the reliability of Pb-free solder joints with PCB (printed circuit board) surface finish under thermal or vibration stresses are in progress, because the electronics is operating in hash environment. Therefore, it is necessary to assess Pb-free solder joints life with PCB surface finish under thermal and mechanical stresses. We have investigated 4-points bending fatigue lifetime of Pb-free solder joints with OSP (organic solderability preservative) and ENIG (electroless nickel and immersion gold) surface finish. To predict the bending fatigue life of Sn-3.0Ag-0.5Cu solder joints, we use the test coupons mounted 192 BGA (ball grid array) package to be added the thermal stress by conducting thermal shock test, 500, 1,000, 1,500 and 2,000 cycles, respectively. An 4-point bending test is performed in force controlling mode. It is considered that as a failure when the resistance of daisy-chain circuit of test coupons reaches more than $1,000{\Omega}$. Finally, we obtained the solder joints fatigue life with OSP and ENIG surface finish using by Weibull probability distribution.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.267-271
• /
• 2005

This experiment was carried out at 450"C, which is relatively lower than the temperature for supercritical water oxidation (600-650$^{\circ}C$). In this experiment, the decomposition rates of various incombustible organic substances were very high. In addition, it was confirmed that hetero atoms existed in organic compounds and chlorine was neutralized by sodium(salt formation).However, to raise the decomposition rate, relatively large amount of sodium nitrate(3-4 times the equivalent weight) was required. When complete oxidation is intended as in the case with PCB, the amount of oxidizer and decomposition cost is important. But when vaporization reduction is required as in the case with nuclear wastes, the amount of radioactive wastes increases instead. But as can be seen in the result of XRD measurement, unreacted sodium nitrate remained unchanged. If oxidation reaction of organic substance simply depends on collision frequency, unreacted sodium nitrate can be recovered and reused, then oxidation equivalent weight would be sufficient. In the gas generated, toxic gas was not found. As the supercritical water medium has high reactivity, it is difficult to generate relatively low energy level SO$_{X}$, and NO$_{X}$.

• Journal of Marine Bioscience and Biotechnology
• /
• v.8 no.1
• /
• pp.10-17
• /
• 2016

A wide-spread contamination of persistent organic pollutants (POPs) such as dioxins, PCBs, PBDEs in the aquatic ecosystem has generated a great concern over the potential risk for these substances to impact marine biotas and food web. Since a major exposure route of these substances to the humans is through the consumption of food including fish and marine byproducts, the consumption of contaminated products has been a great public health concern. Exposure to POPs has been associated with a wide spectrum of adverse effects including reproductive, developmental, immunologic, carcinogenic, and neurotoxic effects. This review covers the background information of key POPs substances and the recent development of toxicity studies including the mode of action. Because neurotoxic effects of some POPs have been observed in humans at low concentrations, polychlorinated biphenyl (PCB), a representative chemical of POPs, is focused to discuss the possible mode(s) of action for the neurotoxic effects. This review provides the updates of toxicity studies on POPs and paves ways to discuss a possible implication of contaminated marine biota over the human health among the marine biotechnology researchers.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.109-120
• /
• 2000

In the analysis of the common categories, moisture contents and organic concentrations were not much different according to the types of industry or treatment facilities. When heavy metals contribution of the sludge from domestic and industrial wastewater treatment facilities was analyzed, As, Hg and Cr concentrations were relatively high among 42 standards of the fertilizer law. As concentration war higher in 28 of 42 facilities (67%) than limits of the fertilizer law. Hg concentration was not acceptable in the 21 of 42 facilities (50%). Cr concentration was not acceptable in 9 of 42 facilities (21%). From these results, It is found that As is the most frequently detectable component and contaminant than any other heavy metals in sludges. The data from this experiment was also compared with the guidelines of harmful organics and the rest of heavy metals that are regulated by some of the foreign countries. Be, Se and Mo concentrations were lower than the limits. Among the organics, the average concentration of PCB (10 samples) was 26.2 ppb. The highest concentration was 162.6 ppb in the sludge of the municipal wastewater treatment facilities and the lowest concentration was 2.14 ppb from the skin manufacturing industry. From the leaching analysis of re-manufacturing goods from the sludge, most of them was acceptable on the regulation law but Cr concentration was over the limit.