• 제목/요약/키워드: Organic Coatings

검색결과 146건 처리시간 0.026초

동시 스퍼터링으로 제조한 AZO-ITO 혼합박막의 증착 중 수소 혼입 영향 분석 (Effect of H2 Addition on the Properties of Transparent Conducting Oxide Films Deposited by Co-sputtering of ITO and AZO)

  • 김혜리;김동호;이성훈;이건환
    • 한국표면공학회지
    • /
    • 제42권6호
    • /
    • pp.267-271
    • /
    • 2009
  • Multicomponent transparent conducting oxide films were deposited on glass substrates at 150 by dual magnetron sputtering of AZO and ITO targets. In the case of mixing a limited amount of ITO (10W), resistivity of TCO films was significantly increased compared to the AZO film; from $3.5{\times}10^{-3}$ to $9.7{\times}10^{-3}{\Omega}{\cdot}cm$. Deterioration of the electrical conductivity is attributed to the decreases in carrier concentration and Hall mobility. Improvement of the conductivity could be obtained for the films prepared with ITO powers larger than 40 W. The lowest resistivity ($\rho$) of $7.3{\times}10^{-4}{\Omega}{\cdot}cm$ was achieved when ITO power was 100 W. Effects of $H_2$ incorporation on the electrical and optical properties of AZO-ITO films were investigated in this work. Addition of small amount of hydrogen resulted in the increase of carrier concentration and the improvement of electrical conductivity. It is apparent that the roughness of AZO-ITO films decreases dramatically after the transition of microstructure from polycrystalline to amorphous phase, which gives practical advantages such as an excellent uniformity of surface and a high etching rate. AZO-ITO films grown at sputtering ambient with hydrogen gas are expected to be applicable to optoelectronic devices such as organic light emitting diodes and flexible displays due to their sufficient electrical and structural properties.

해양구조물용 silica 기반 내해수성 코팅제의 제조 및 응용 (Preparation and application of silica-based coatings for corrosion protection of marine structures)

  • 이병우
    • 한국결정성장학회지
    • /
    • 제31권3호
    • /
    • pp.137-142
    • /
    • 2021
  • 본 연구에서는 상온경화형 silica-based 코팅제의 제조 및 해양구조물에 적용하여 가혹한 해양환경에서 방식 및 방오 성능 발현을 위한 실용화 개발 연구를 수행하였다. 구조상 외부에 노출된 부분이 많은 해양(플랜트) 구조물은 강한 자외선, 극심한 온도차, 염수에 의한 부식 등 가혹한 해양환경에 고립되어 운용된다. 이러한 환경 하에서는 쉽게 열화 되고 파도 등 물리적 자극에도 쉽게 침식되는 유기계 페인트들은 그 역할을 제대로 할 수 없다. 해양구조물에 치밀한 세라믹 코팅을 형성시킬 경우 녹이 발생하지 않고 경도가 높아 시설물을 해수환경 하에서도 치밀하게 보호할 수 있다. 세라믹 코팅제의 경우 그 기능의 장점들로 인해 해양 구조물에서 그 용도와 적용범위는 크게 증진될 수 있을 것이다. 따라서 colloidal silica를 기반으로 실란계 커플링제, 경화제 및 세라믹 충진제로 구성된 silica-based 코팅제 조성개발과 해수중 방식 및 방오용 보호코팅제로의 응용에 대해 연구하였다.

고분자 기판위에 다층 구조의 박막형 보호층을 적용한 투습률 향상 (Improvement of Permeation of Applied Multi-layer Encapsulation of Thin Films on Ethylene Terephthalate(PET))

  • 김종환;한진우;김영환;서대식
    • 한국전기전자재료학회논문지
    • /
    • 제19권3호
    • /
    • pp.255-259
    • /
    • 2006
  • In this paper, the inorganic-organic thin film encapsulation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter and Spin-Coater system, the various kinds of inorganic and organic thin-films were deposited onto the Ethylene Terephthalate(PET) and their interface properties between organic and inorganic layer were investigated. In this investigation, the SiON and Polyimide(PI) layer showed the most suitable properties. Under these conditions, the WVTR(water vapour transition rate) for PET can be reduced from level of $0.57\;g/m^2{\cdot}day$ (bare subtrate) to $1{\times}10^{-5}\;g/m^2{\cdot}day$ after application of a SiON and Polyimide layer. These results indicates that the SiON/PI/SiON/PI/PET barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

고효율 및 장수명의 OLED Passivation 기술 개발 (Development of OLED Passivation Method for High efficency and life time)

  • 한진우;김종환;김영환;서대식;김영훈;문대규;한정인
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.267-268
    • /
    • 2005
  • In this paper, the inorganic-organic thin film encapsulation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter and Spin-Coater system, the various kinds of inorganic and organic thin-films were deposited onto the Ethylene Terephthalate(PET) and their interface properties between organic and inorganic layer were investigated. In this investigation, the SiON and Polyimide(PI) layer showed the most suitable properties. Under these conditions, the WVTR(water vapour transition rate) for PET can be reduced from level of 0.57 g/$m^2$/day (bare subtrate) to $1{\times}10^{-5}$ /$m^2$/day after application of a SiON and Polyimide layer. These results indicates that the SiON/PI/SiON/PI/PET barrier coatings have high potential for flexible organic light-emitting diode(OLED) applications.

  • PDF

고분자 기판위의 다층 보호막의 성능 평가 (Improvement of Permeation of applied Multi-Layer Encapsulation of thin films on Ethylene Terephthalate(PET))

  • 김종환;한진우;강희진;김종연;문현찬;최성호;박광범;김태하;김휘운;서대식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
    • /
    • pp.60-61
    • /
    • 2006
  • In this paper, the inorganic-organic thin film encapsulation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam, Sputter and Spin-Coater system, the various kinds of inorganic and organic thin-films were deposited onto the Ethylene Terephthalate(PET) and their interface properties between organic and inorganic layer were investigated. Results indicates that the SiON/PI/SiON/PI/PET barrier coatings have high potential for flexible organic light-emitting diode(OLEO) applications.

  • PDF

비수용액성 전해액에서의 전기도금 (Electrodeposition from Non-Aqueous Electrolytes)

  • Brooman, Eric W.
    • 한국표면공학회지
    • /
    • 제24권3호
    • /
    • pp.169-176
    • /
    • 1991
  • The pros and cons of deposition metals, alloys and compounds from organic, inorganic and molten salt non-aqueous plating baths are discussed. Although some metals, alloys and compounds not obtainable otherwise can be deposited, few commercial processes exist. Widespread use is limited by the cost, complexity, and hazards associated with non-aqueous electrolytes, coupled with the relatively small markets for many of these coatings.

  • PDF

유기계 방청제를 혼입한 표면피복재의 유해이온 침투저항에 관한 실험적 연구 (An Experimental Study on the Resistance to Penetration of Harmful Ions in Surface Coatings Material Containing Organic Corrosion inhibitor)

  • 류화성;신상헌;이한승
    • 한국건축시공학회지
    • /
    • 제17권2호
    • /
    • pp.157-166
    • /
    • 2017
  • 일반적으로 크리트 구조물의 열화를 발생하는 가장 중요한 원인은 탄산화와 염소이온이다. 대체적으로 많은 콘크리트 구조물에서 탄산화와 염소이온으로 인하여 철근이 부식되며 이에 대한 많은 연구가 이루어지고 있다. 특히, 최근에는 보수용으로서 콘크리트 보호용 표면피복재에 방청제를 함침시켜, 염화물을 포함하고 있는 콘크리트 내 철근의 부식을 억제하는 공법도 개발되어지고 있다. 이에, 본 연구에서는 기존 보수재료 보다 부식 억제가 우수하고 열화원인인 $CO_2$$Cl^-$를 고정하는 유기계방청제를 혼입한 표면피복재의 특성 평가를 위해 촉진탄산화 및 시차 열 중량분석(TG-DTA), CASS시험를 실시하여 특성을 실험적으로 평가하였다. 실험 결과, TG-DTA 분석과 촉진탄산화를 통하여 유기계방청제 혼입으로 시멘트 콘크리트에 $CO_2$가 아민유도체와 직접적으로 반응하여 탈 양성자화 되면서 산성상태의 물질을 생성하여 안정화된 상태, 즉 $CO_2$가 고정화되어 탄산화 억제효과가 있음을 확인 하였다. 또한, CASS실험에서도, $Cl^-$ 고정 특성이 있는 유기계 방청제가 혼입된 표면피복재를 도포한 시험체의 경우, 28일째까지도 적청 발생이 관찰되지 않았으며 염화물에 의한 철근 부식을 방지하는데 우수한 성능으로 가지고 있음을 확인하였다.

자외선 경화형 유기/무기 복합코팅에 의한 폴리카보네이트의 내마모성 향상 연구 (Study on the Improved Abrasion Resistance of Polycarbonate Substrate by UV-curable Organic/Inorganic Hybrid Coatings)

  • 윤석은;우희권;김동표
    • 폴리머
    • /
    • 제24권3호
    • /
    • pp.389-398
    • /
    • 2000
  • 폴리카보네이트 표면에 spin-coating한 유/무기 복합 코팅막을 자외선 경화와 가열(12$0^{\circ}C$, 12시간)처리함으로써 약 4~13 $\mu\textrm{m}$ 두께의 투명한 내마모성 유/무기 복합코팅막을 제조하였다. 코팅용액은 무기상과 유기상을 각각 0 : 100, 20 : 80, 30 : 70, 50 : 50, 80 : 20 중량비로 혼합한 다음 광개시제, 증감제 및 계면활성제를 첨가하여 제조하였다. 무기상은 TEOS와 실란커플링제 MPTMS을 1 : 2 혹은 2 : 1몰비로 흔합하여 졸ㆍ겔 반응으로 제조하였으며, 유기상은 2관능형 urethane acrylate 올리고머, 다관능형 TMPTA와 HDDA를 4:3:3 wt% 비율로 흔합하여 제조하였다. 유/무기복합상의 화학적 변화는 FT-IR, $^{29}$ Si-NMR로 분석하였으며, 열분석과 코팅층 표면 형상은 TGA/DSC, SEM, AFM으로 분석하였다. 무기물의 함량과 실란커플링제의 첨가량이 증가 할수록 분자수준의 흔화도가 개선되고 표면 평활도와 내마모성도 향상되었다. 즉 약 10 $\AA$ 이하의 표면 거칠기와 약 15$0^{\circ}C$의 T$_{g}$를 나타내는 시료는 500회 마모시험 전후 단지 16%의 광투과도 감소만을 보인 반면에, 무코팅 폴리카보네이트를 46%의 광투과율 감소를 나타내었다..

  • PDF

High performance Organic-Inorganic Hybrid Materials for Application in OLED Barrier Coating

  • Jung, Kyung-Ho;Yun, Chang-Hun;Bae, Jun-Young;Yoo, Seung-Hyup;Bae, Byeong-Soo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.806-809
    • /
    • 2009
  • Epoxy functionalized organic-inorganic hybrid materials (hybrimers) were synthesized by sol-gel reaction for application in OLED barrier coating. By using the calcium degradation method, the oxygen transition rate (OTR) and water vapor transition rate (WVTR) measured so far is $10^{-2}cc/m^2$-day for oxygen and $10^{-1}g/m^2$-day for water molecules with single hybrimer coating film, respectively. Encapsulated OLED devices have life time of 14hrs of a single hybrimer barrier coating and 29hrs of hybrimer/inorganic double barrier coatings at $25^{\circ}C$ and 60% relative humidity.

  • PDF

졸-겔법을 이용한 광증폭기의 Er 이온 캡슐화 및 광학적 특성 (Encapsulation and optical properties of Er3+ ions for planar optical amplifiers via sol-gel process)

  • Kim, Joo-Hyeun;Seok, Sang-Il;Ahn, Bok-Yeop
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
    • /
    • pp.135-135
    • /
    • 2003
  • The fast evolution in the fold of optical communication systems demands powerful optical information treatment. These functions can be performed by integrated optical systems. A key component of such systems is erbium doped waveguide amplifier(EDWA). The intra 4f radiative transition of Er at 1.5 $\mu\textrm{m}$ is particularly interesting because this wavelength is standard in optical telecommunications. The fabrication of waveguide amplifier for integrated optics using sol-gel process has received an increasing attention. Potential advantage of lower cost by less capital equipment and easy processing makes this process an attractive alternatives to conventional technologies like flame hydrolysis deposition, ion exchange and chemical vapor deposition, etc. In addition, sol-gel process has been found to be extremely suitable for the control of composition and refractive index related directly with optical properties. The main drawback of such an amplifier with respect to the EDWA is the need for a much higher Er3+ concentration to compensate for the smaller interaction length. However, the high doping of Er might be resulted in the non-radiative relaxation by clustering of Er ions End co-operative upconversion. In order to solve this problem, we investigate the possibility of avoiding short Er-Er distances by encapsulation of Er3+ ions in hosts such as organic-inorganic hybrid materials. For inorganic-organic hybrid sols, methacryloxypropyltrimethoxysilane (MPTS), zirconyl chloride octahydrate and erbium(III) chloride hexahydrate were used as starting materials, followed by conventional sol-gel process. It was observed by TEM that nano sols having core/shell toplology were formed, depending on the mole ratio of Zr/Er. The surface roughness for the coatings on Si substrate was investigated by AFM as a function of Zr/Er ratio. The local environment and vibrational Properties of Er3+ ions were studied using Near-IR, FT-IR, and UV/Vis spectroscopy. Nano hybrid coatings derived from polymer and Er doped encapsulation Eave the good luminescence at 1.55$\mu\textrm{m}$.

  • PDF