• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.69-76
• /
• 2015

Bluetooth 4.0 is a low energy near communication technology. It is a suitable for Internet of Things(IoT), that is, all devices using small electric power consume are connected because power consumption is more lowing and brodening for application scope against bluetooh 3.0. Therefore in this paper, a present situation of beacon technologies are investigated and a design principle of restaurant advertisement and order system using beacon technology are presented. A beacon which is tranceiver based on bluetooth 4.0 technology and bluetooth 4.0 receiver device design is showed and design method of smart-phone interlocking these devices is presented. Also it shows that this design method is very useful for the Restaurant Advertisement & Order Commercial System production.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.118-120
• /
• 1992

We have developed and been using laboratory order communication system which is a computerized laboratory request and reception system wi th bar code between inpatient or outpatient and the clinical laboratory in Chungbuk National Unversity Hospital. Work flows are as follows: Tests are requested by the physicians through hospital information system without issuing request forms. Bar code stickers containing demographics of patient and other informations such as sample number, slip code and specimen code are printed and attached to smaple tubes. At the department of clinical pathology, smaples are received through the bar code reader. Area numbers are automatically created and laboratory work numbers are determined. Worklists can be issued by each section of laboratory when needed. Our order communication system alleviates the human labor such as specimen labelling and making worklist and reduces clerical errors that occur from sample collection to laboratory analysis.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.29-34
• /
• 2007

The input and output impedances in a low voltage distribution system is one of the most important matters for power line communication because from the viewpoint of communication, the attenuation characteristic of the high frequency signals is greatly caused by impedance mismatch during sending and receiving. The frequency range is from 1MHz to 30MHz. Therefore, this paper investigates the input and output impedances in order to understand the characteristic of high frequency signals in the low voltage distribution system between a pole transformer and an end user. For power line communication, the model of Korea's low voltage distribution system is proposed in a residential area and then the low voltage distribution system is set up in a laboratory. In the low voltage distribution system, S parameters are measured by using a network analyzer. Finally, input and output impedances are calculated using S parameters.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.373-378
• /
• 2016

Since the KTX starts operation in 2004, Korean railway system has sustained the highest safety and accuracy. In order to keep this achievement, the LTE based wireless communication system has been introduced for mobile communications and signal transmission. railway, and activities for its standardization are on the way. Railway communication system will be used as part of national safety net through interworking with safety network. This paper reviews the contents of standards and technologies in an LTE-based railway communication(LTE-R) system, and the items to be standardized to improve operational efficiency of the railway system by building a national railway radio communication system.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.4
• /
• pp.299-312
• /
• 2000

Because shore(ship) to ship(shore) communication service via INMARSAT pay expensive cost, satellite service typically use two stage service that land users dial up LES(Land Earth Station) for sending or receiving message. In order to send and receive message, land users must maintain online state with LES on dedicated line. Also, two stage INMARSAT communication service must consume long time that processes step by step. In case of large company, they have own communication system, but small companys communicate simple messages with only telex. This paper describes the design and implementation of an integrated communication services via INMARSAT-C. This system uses inexpensive INMARSAT-C for transmission between ship and land. Because this system provides web and E-Mail interface, users send and receive messages easily and quickly. This system provides most users with inexpensive and easy communication facilities between ship and land.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.666-674
• /
• 2013

This paper studied about the design and implementation of tactical communication network simulator in order to obtain tactical communication network parameter, such as link capacity and routing plan, and a number of exceptional cases that may occur during actual deployment by conducting simulation of a large-scale tactical communication networks. This tactical communication network simulator provides equipment models and link models of commercial OPNET simulator for tactical communication network. In addition, 6 types of simulation scenario writings convenience functions and traffic generation models that may occur in situations of tactical communication network environment were implemented in order to enhance user friendliness. By taking advantages of SITL(System-In-The-Loop) function of OPNET, the tactical communication network simulator allows users to perform interoperability test between M&S models and actual equipment in operating simulation of tactical communication network, which is run on software. In order to confirm the functions and performance of the simulator, small-scale of tactical communication network was configured to make sure interoperability between SITL-based equipment and a large-scale tactical communication network was simulated and checked how to cope with traffic generated for each network node. As the results, we were able to confirm that the simulator is operated properly.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2346-2349
• /
• 2005

Distributed Autonomous Robotic System (DARS) is defined as a system that independent autonomous robots in the restricted environments infer their status from pre-assigned conditions and operate their jobs through the cooperation with each other. In the DARS, a robot contains sensor part to percept the situation around themselves, communication part to exchange information, and actuator part to do a work. Especially, in order to cooperate with other robots, communicating with other robots is one of the essential elements. Because Bluetooth has many advantages such as low power consumption, small size module package, and various standard protocols, Bluetooth is rated as one of the efficient communicating technologies which can apply to small-sized robot system. In this paper, we will develop Bluetooth communicating system for autonomous robots such as DARS robots. For this purpose, The Bluetooth communication system must have several features. The first, this system should be separated from other robot parts and operate spontaneously and independently. In other words, this communication system should have the ability to organize and maintain and reorganize a network scheme. The next, this system had better support any kinds of standard interfaces in order to guarantee flexible applicability to other embedded system. We will discuss how to construct and what kind of procedure to develop the network system.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.677-682
• /
• 2023

A large number of motors and sensors are used to drive a humanoid robot. In order to solve the wiring problem that occurs when connecting multiple actuators, a controller based on a communication network has been used, and CAN, which is advantageous in terms of cost and a highly reliable communication protocol, was mainly used. In terms of the structure of the controller, a torque control type structure that is easy to implement an advanced algorithm into the upper controller is preferred. In this case, the low communication bandwidth of CAN becomes a problem, and in order to obtain sufficient communication bandwidth, a communication network is configured by separating into a plurality of CAN networks. In this study, a stability analysis on transmission time delay is performed for a multi-motor control system in which high-speed FlexRay and low-speed CAN communication networks are hierarchically connected in order to obtain a high communication bandwidth, and sensor information and driving signals are delivered within the allowed transmission time. The proposed hierarchical network-based control system is expected to improve control performance because it can implement multiple motor control systems with a single network.

• Journal of the Korea Society for Simulation
• /
• v.9 no.2
• /
• pp.39-49
• /
• 2000

In this paper, we added that developed communication control system between the PLC of pressure machine and the control computer, and developed a new protocol in order to communicate between the PLC signal of pressure machine and the control computer. This communication control systems play an important role in transforming the PLC vendor self-interface type and between computer and PLC. This system has PLC access function to control computer on the backbone network, and then could be operated by PLC through this system. The benefits we can obtain by developing this communication control systems are as follows; First, we can improve the quality of goods and the management of materials using the communication network and then implement the centralization management. Second, we can decrease manpower for production. Finally, we can maximize the company's profit with the increasing productivity by supervising the equipment wrong workings in the central.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.485-490
• /
• 1992

This paper describes a hardware structure and a communication system of a multiple autonomous robots system. Many studies have been devoted to the development of a single autonomous robot. It is, however, also necessary to investigate decentralized multiple autonomous robots system in order to make wider use of such robots. We have been studying a multiple autonomous robots system employing two mobile robots. In this paper, problems are overviewed on the developed multiple autonomous robots system from the viewpoint of hardware and communication, and an improved system is presented, which employs a new control strategy of a mobile robot and realizes reliable data communication between host computers.