• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.451-458
• /
• 2012

Irrigation facilities such as reservoir, sluice, and waterways are managed for preparing flood or drought. It is necessary to efficiently measure water level, flow rate, and related data in national-wide scattered irrigation facilities and to systematically manage data obtained from the facilities. This paper presents a management system for irrigation facilities in order to fast and exact measure their states. The management system consists of mobile device with QR-code function, sensors and gateways, a monitoring system and telecommunication networks. In order to present the benefits of the adoption of the management system against the legacy hand-writing way, this paper presents a economic analysis and its illustrative result.

• International Journal of Quality Innovation
• /
• v.5 no.2
• /
• pp.122-131
• /
• 2004

Because of three reasons: rare natural resources, high dependent ratio and rapid wage increases, Korea must take the non-price competitive strategy. The developing process of quality management system in Korea can be categorized into five stages according to changes in economic policy. In order to develop the Korean quality management system effectively, we should try to connect total quality management with management system and emphasize the training and education.

• Journal of Industrial Convergence
• /
• v.13 no.3
• /
• pp.27-39
• /
• 2015

This Study aims to analyze the management performances of the rubber products from the perspectives of ISO9001 Quality Management System, which is a new management technique for management innovation, in order to secure the competitiveness of the small and medium manufacturers of rubber products for automobile as automobile application components. The results of the analysis can be summarized as follows: First, as the results of the analysis of effect of the (1) responsibility of the management, (2) resources management, (3) realization of the products, and (4) measurement, analysis and improvement, which are the 4 core requirements of the ISO9001 Quality Management System, on the management performances of the small and medium sized manufacturers of the rubber components for automobile, it was found that only the responsibility of the management and resources management affect the management performance. The above research findings imply that the company must absolutely rely on the upper ranked groups rather than the lower ranked groups, and on the responsibilities of the management rather than the upper ranked groups in order to elevate the management performance of the small and medium sized manufacturers of the rubber components for automobile.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.4
• /
• pp.20-28
• /
• 2021

The Domestic Construction Industry is in the process of changing from a one-sided production method centered on the contractor to a production method in which the order and the contractor can collaborate. Depending on the delivery method, the bid/success method, the contract method, and the degree of business involvement of the order may also vary. In this thesis, in order to introduce 'Construction Management at Risk' suitable for the domestic environment, domestic and foreign institutional analysis, bid process analysis, contract fulfillment and management analysis, post management analysis, and related laws and regulations for legalization In order to suggest a plan for the efficient operation of the system, a system and case analysis of domestic and international construction responsibility type construction project management was conducted. 'Construction Responsible Construction Project Management' defined in the Framework Act on the Construction Industry is divided into the main contract transfer contract, which is a service contract performing pre-con work, and the main contract, which is construction project management and construction contract. Therefore 'Construction Management at Risk' should be regarded as one of the ordering methods rather than a successful bid system, as in the case of overseas, and legalization as a bidding system equivalent to design/construction batch bid and technology proposal is necessary for introduction. In order to introduce 'Construction Management at Risk' suitable for the domestic environment, domestic and foreign institutional analysis, bidding process analysis, contract fulfillment and management analysis, and follow-up management analysis are conducted. A method for efficient operation was suggested so that it can be applied in the domestic market while maintaining the original merits of this system.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.4
• /
• pp.431-436
• /
• 2023

In order to provide continuous Korea Augmentation Satellite System (KASS) services, the operation organization should continuously and systematically perform operations, maintenance, and technical activities. All subsystems of KASS, all Line Replacement Units (LRUs), and Software Replacement Units (SWRUs) should be operated and maintained continuously. In order to effectively manage these activities, it is necessary to develop an Operation Management Tool (OMT). For this purpose, operation management, operation organization, and operation activities were defined. The defined requirements were divided into general, function, interface, and database for OMT development, and functions and decision-making procedures consisting of site/asset/trouble/work order/schedule management were designed. The OMT developed by reflecting the site and asset information as well as the design content met predefined requirements. The OMT will be actively used in actual KASS operation and will evolve by continuously reflecting the additional requirements of operators. Through this tool, KASS will support continuous service provision.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.49-55
• /
• 2007

A special cause producing temporary deviation in the underlying process can influence on process adjustment in First-Order System feedback control system. In this paper, the impact of special causes on the forecasts and the process adjustment that is based on the EWMA forecasts are derived for a first-order system. For some special causes with patterned type of contamination, the influence of the causes on the output process are explicitly investigated. A data set, contaminated by a special cause of level shift, is analyzed to confirm the impact numerically.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.195-207
• /
• 1999

Classification and Coding(C&C) systems as a core of design information management have been accomplished by many studies in terms of design and manufacturing attribute based on Group Technology. Those are very difficult to apply in make-to-order(MTO) manufacturing because the environment of MTO has various characteristics of product, many licensors, engineering change, insufficiency of integrated management system for codes and so on. This paper presents a suitable C&C system to MTO manufacturing which consider management level and drawing. The steps of developing the C&C system are as follows: 1) analysis of existing coding system and drawing type; 2) design of C&C system; 3) practice of designed coding system to a field.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.193-203
• /
• 1995

The production management system software which can be applied In the medium and small companies is developed. Since the medium and small companies hesitate to install the computer system for production management owing to the lack of funds and the complexities of operation, the system is made to be used in PC and only requires minimum input data. This system is composed of interrelated modules for receive/order release, inventory management MRP, new product registration, document management and production scheduling. In this paper the architecture of the system, functions of each module, and information processing procedures of each funtion are discussed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.4
• /
• pp.377-386
• /
• 2023

As discarded fishing gear settles or floats on the seabed, it destroys the spawning and habitat of fisheries resources that causes various safety accidents and adverse effects on the environment, such as generating microplastics and causing ship accidents. In order to solve this problem, this study is intended to present an implementation plan for establishing a fishing gear deposit system in order to use it as basic data for establishing policies for fishing gear management in Korea. In order to successfully implement the fishing gear deposit system, the deposit system must be established in the form of fishing gear completed at the production stage. It was found that the marking of the object should be easy, and that determining an appropriate deposit amount to motivate the return of waste fishing gear and establishing a convenient return procedure for returned waste fishing gear were important factors. In addition, transparent management of unreturned deposits and mandatory use of fishing gear subject to the deposit system for fishermen will be necessary. The role of a specialized organization to manage and operate all of these procedures is also very important. It is necessary to establish a new mandatory provision in the Fisheries Act to require fishermen who directly use fishing gear to use fishing gear with a deposit refund mark, and to ensure the implementation of the deposit system by linking it with the evaluation items of government policy projects. Since the main purpose of the deposit system is to collect discarded fishing gear, a support plan will be necessary in accordance with the purchase project for fishing waste salvaged by local governments in 2020.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.78-86
• /
• 2019

Various safety measures have been established and implemented in order to reduce construction accidents. However, statistics data on at construction sites still show higher accident and mortality rates than other industries. As a result of investigating the causes of accidents occurring in the construction industry, most accidents resulted from the failure of the system. Therefore, the existing safety management system of the construction site is monitored so that it operates properly in the field, and it is an important factor to actively participate in construction work. In order to overcome this, the government emphasized on-site inspections and planning and implementation confirmation by public institutes to ensure the effectiveness of the safety management system through amendment of the Construction Technology Promotion Act, but the orderer' safety capability and manpower are insufficient at present. Therefore, in this study, the safety management system, such as design for safety, safety management plan, safety check, safety management cost, etc. specified in the Construction Technology Promotion Act, is regularly checked and confirmed to improve the effectiveness of the safety management system as well as to improve the safety management system of the construction site by deriving measures to strengthen the public function of the government.