• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.965-969
• /
• 2003

In this paper, the implementation technique of digital crossover network using perfect linear phase IIR filters is presented. This system has various advantages which cannot be obtained from analog crossover network such as linear phase response, flat group delay and sharp cut-off at low-order over audio frequency band. The simulation results show that the group delay response is maximally flat and twice more attenuation in stop-band than the prototype elliptic IIR filter at all desired frequency.

• Macromolecular Research
• /
• 제15권4호
• /
• pp.379-384
• /
• 2007

Sulfonation of polyetheretherketones (PEEK) was carried out in order to fabricate commercial perfluorosulfonic acid membrane alternatives, which were characterized in terms of their ion exchange capacity, ionic conductivity, water swelling, methanol crossover and electrochemical performance in their direct application as a methanol fuel cell. A high ion exchange capacity, 1.88, was achieved with a sulfonation reaction time of 8 h, with a significantly low methanol crossover low compared to that of Nafion. However, the morphological stability was found to deteriorate for membranes with sulfonation reaction times exceeding 8 h. Electrochemical cell tests suggested that the fabrication parameters of the membrane electrode assembly based on the sulfonated PEEK membranes should be optimized with respect to the physicochemical properties of the newly prepared membranes.

• 한국지능시스템학회논문지
• /
• 제11권3호
• /
• pp.191-199
• /
• 2001

유전자알고리듬(Genetic Algorithm)은 확률적인 집단 탐색법이고 적응도함수의 형태에 관계없는 직접 탐색법이기 때문에 최근 최적화 방법으로 주목을 받고 있다. 본 논문에서는 Job-shop Schedule Problem에 대하여 교배방법으로 JOX를 사용하며, 효율적인 탐색을 위하여 탐색범위를 축소시키는 강제조작을 형질유전을 고려한 형질유전GT법을 제안하고, 세대교체에 있어 모집단의 다양성을 유지하기 위하여 집단 내에 동일한 개체를 배제하는 방법을 제안한다. 제안 알고리듬을 Fisher & Thompson의 FT10$\times$10 및 FT20$\times$5 문제에 적용하여 유효성을 실험적으로 검증한다.

• 정보처리학회논문지C
• /
• 제15C권1호
• /
• pp.37-44
• /
• 2008

이동 네트워크 환경에서 MN(Mobile Node)의 핸드오버 후 새로운 경로 상에 자원을 예약할 때 시그널링 지연을 최소화하기 위해서는 이전 경로와 새로운 경로가 만나는 지점에 있는 노드인 크로스오버 노드(Crossover Node:CRN)를 발견하는 것이 중요하다. 일반적으로 크로스오버 노드의 발견은 MN과 CN(Correspondent Node)간 설립된 종단간 SID(Session ID)를 주요키로 사용하여 이루어지지만, HMIPv6(Hierarchical Mobile IPv6) 네트워크에서 MAP(Mobility Anchor Point)과 HA(Home Agent)간 군집(Aggregate) 세션 단위로 자원예약을 하는 경우에는 이와 같은 일반적인 방법의 적용이 어렵다. 군집 예약을 할 때에는 종단간 SID와는 별도로 군집 SID를 사용하는데, MN의 핸드오버 후 이전 MAP과 HA간 설립된 세션의 군집 SID가 새로운 MAP과 HA간 설립된 세션의 군집 SID와 달라서 SID를 이용하여 크로스오버 노드를 발견할 수 없기 때문이다. 이에, 본 논문에서는 HMIPv6 네트워크에서 차세대 네트워크 시그널링 프로토콜인 NSIS(Next Step in Signaling)를 이용하여 자원을 예약하는 경우 군집 예약이 이루어진 MAP과 HA간 터널상에서 크로스오버 노드를 발견하고, 크로스오버 노드를 발견한 즉시, 군집 예약된 자원의 갱신이 지역적으로 이루어지도록 하는 방안을 제안한다. 시뮬레이션을 통해, 시그널링 메시지가 항상 터널의 끝 노드까지 전달되는 기존 방안에 비해 제안하는 방안이 자원 예약을 위한 시그널링 지연을 단축시키고, 핸드오버 동안의 평균 처리율을 향상시킴을 알 수 있었다.

• 한국항해항만학회지
• /
• 제31권7호
• /
• pp.605-611
• /
• 2007

In order to become a mega hub port, major ports all over the world are making every effort to enhance their productivity through efficiency of internal operation. Accordingly, in order to enhance the competitiveness of a container terminal, an automated container terminal is considered as the best alternative. An automated container terminal is using such automated handling equipment as AGV(Automated Guided Vehicles) and ATC(Automated Transfer Crane). The efficient equipment operation plays a critical role in enhancing the productivity of an automated container terminal. In an automated container terminal, the most important equipments are AGV and ATC. Each block of containers with a vertical layout is generally operating two ATCs. The two ATCs can be crossed or not at each block. In the case of operating crossover ATC, it has an advantage of high flexibility that ATC work is possible at both TP(Transfer Point) of each block. But it has also a disadvantage that the yard has to be operated at a low storage level of containers in the terminal yard. Recently, for automated container terminals, which are being prepared for opening in Korea, they plan to use uncrossed twin ATC in order to make the storage level of their yards high at a low cost. Therefore, studies have to be made in order to increase the efficiency of twin ATC system based on the flexibility that the crossover ATC system has. This research aims to suggest an operation strategy to improve efficiency of twin ATC at each storage block in a yard.

• 성인간호학회지
• /
• 제22권1호
• /
• pp.31-40
• /
• 2010

Purpose: The purpose of this study was to examine whether there is difference in the effects of aromatherapy on dysmenorrhea by research design. Methods: Findings from the two different research designs (Nonequivalent control group pretest-posttest [NCG] design vs. two-group crossover design) were compared in regard to the effect of aromatherapy on dysmenorrhea. The subjects of the NCG design and the crossover design were a total of 58 female nursing students. The treatments (aroma essential oil inhalation and carrier oil inhalation) were given using a necklace. The data were analyzed by Fisher's exact test, t-test, Mann-Whitney test, paired t-test, and Shapiro-Wilk test using the SPSS/WIN 12.0 program. The effect size for the two research designs was calculated. Results: In both research designs, the level of dysmenorrhea and menstrual pain after the aroma treatment were not significantly different from those after the placebo treatment. The effect size of the NCG design was higher than that of the crossover design. Conclusion: Aroma inhalation may not be effective in managing dysmenorrhea and menstrual pain. In order to further clarify the efficiency of research design and the effect of aromatherapy on discomfort during menstruation, replication studies are necessary. Future studies need to examine the effects of different research design on non-interval variables.

• 전기화학회지
• /
• 제11권1호
• /
• pp.1-5
• /
• 2008

A Pt-layer was deposited on the anode side of a Nafion membrane via a sputtering method in order to reduce methanol crossover in a direct methanol fuel cell (DMFC). The methanol permeation and the proton conductivity through the modified membranes were investigated. The performances of the direct methanol fuel cell were also tested using single cells with a Nafion membrane and the modified membranes. The Pt-layers on the membrane blocked both methanol crossover and proton transport through the membranes. Methanol permeability and proton conductivity decreased with an increase of the platinum layer thickness. At methanol concentration of 2 M, the DMFC employing the modified membrane with a platinum layer of 66 nm-thickness showed similar performance to that of a DMFC with a bare Nafion membrane in spite of the lower proton conductivity of the former. The maximum power density of the cell using the modified membrane with a platinum layer of 66 nm-thickness increased slightly while that of the cell with the bare membrane decreased abruptly when a methanol solution of 6M was supplied.

• 한국음향학회지
• /
• 제33권3호
• /
• pp.184-190
• /
• 2014

스피커 시스템은 가청 주파수 대역 20 ~ 20,000 Hz를 하나의 유닛으로 재생하는 것이 이상적이지만, 물리적으로 구현하기 어렵다. 따라서 두 개 또는 그 이상의 유닛을 사용하고, 멀티웨이 시스템으로 구성하여 오디오 대역을 커버한다. 멀티웨이 스피커 시스템에서는 고음과 저음의 유닛이 정상적으로 동작되도록 크로스오버 네트워크 필터를 필수적으로 사용해야 한다. 네트워크 필터의 크로스오버 주파수는 대부분 1 ~ 4 kHz 대역에 존재하며, 이 대역은 명료도의 기여율이 높고 음질에 미치는 영향이 아주 크다. 그러나 여러 가지 원인 때문에 크로스오버 주파수 대역에서 위상과 진폭 특성이 정확하게 결합되지 않은 경우가 많다. 즉, 유닛 간의 거리 차와 전기적인 특성 차이 때문에 크로스오버 주파수에서 유닛 간의 진폭과 위상 특성이 정확하게 결합되지 않아서 주파수 특성이 불규칙해지고, 그 결과 음질이 좋지 않고 명료성도 나빠진다. 크로스오버 주파수에서 유닛들을 정확하게 결합시키기 위해서는 각 유닛의 진폭 특성뿐만 아니라 위상 특성까지도 고려하여 결합시켜야 한다. 본 논문에서는 유닛 간의 지연 시간을 조정하여 크로스오버 주파수에서 평탄한 주파수 특성이 되도록 하는 방법과 유닛들의 주파수 롤 오프 특성도 고려한 필터 선택 방법을 제안하였다. 그 결과 크로스오버 주파수 대역에서 ${\pm}1$ dB의 평탄한 주파수 특성이 얻어지고 명료성도 향상되었다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권4호
• /
• pp.217-222
• /
• 2011

Genetic algorithms are one of the most important methods used to solve the Traveling Salesman Problem. Therefore, many researchers have tried to improve the Genetic Algorithm by using different methods and operations in order to find the optimal solution within reasonable time. This paper intends to find a new approach that adopts an improved genetic algorithm to solve the Traveling Salesman Problem, and compare with the well known heuristic method, namely, Kohonen Self-Organizing Map by using different data sets of symmetric TSP from TSPLIB. In order to improve the search process for the optimal solution, the proposed approach consists of three strategies: two separate tour segments sets, the improved crossover operator, and the improved mutation operator. The two separate tour segments sets are construction heuristic which produces tour of the first generation with low cost. The improved crossover operator finds the candidate fine tour segments in parents and preserves them for descendants. The mutation operator is an operator which can optimize a chromosome with mutation successfully by altering the mutation probability dynamically. The two improved operators can be used to avoid the premature convergence. Simulation experiments are executed to investigate the quality of the solution and convergence speed by using a representative set of test problems taken from TSPLIB. The results of a comparison between the new approach using the improved genetic algorithm and the Kohonen Self-Organizing Map show that the new approach yields better results for problems up to 200 cities.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.319-322
• /
• 2009

This paper investigated environmental effects for passive, air-breathing, and vapor-feeding direct methanol fuel cells. In these experiments, experimental parameters are temperature($30^{\circ}C$, $40^{\circ}C$ and relative humidity(25%, 50%, 75%). From these experimental results, the water contents play a key role in terms of optimal ionic conductivity at the cathode catalyst layer. In case of pure methanol feeding, the performance is inversely proportional to the relative humidity. The water generation resulting from methanol crossover maintains ionic conductivity at the cathode. On the contrary, diluted methanol solution (50wt.%) lowers methanol crossover to the cathode. In order to increase ionic conductivity, the relatively high humidity is required to the cathode catalyst layer for the water generation. The relative humidity scales with the performance.