• Journal of Astronomy and Space Sciences
• /
• v.12 no.2
• /
• pp.244-255
• /
• 1995

The success of a satellites mission is largely depended upon the choice of an appropriate orbit. In the case of a remote sensing satellite which observes the Earth, there exits an optimum solar elevation angle depending on the mission. Therefore a sun-synchronous orbit is suitable for a remote sensing mission. The second-order theory for secular perturbation due to non-symmetric geopotential was described. To design a sun-synchronous orbit, a constraint condition on regression of node was derived. A algorithm to determine the altitude and the inclination was introduced using this constraint condition. As practical examples, the altitudes and the inclinations of four remote sensing satellites were calculated. The ground tracks obtained by the orbit propagator were used to verify the resulting sun-synchronous orbital elements.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.296-307
• /
• 1994

Using X-Window system (Motif Graphic User Interface), the AKM (Apogee Kick Motor) firing software for Koreasat which will be launched in 1995 has been developed to transfer the spacecraft from its transfer orbit, provided by the DeltaII launch vehicle, into a nearly geostationary drift orbit. The AKM firing software runs in one of two modes. In mission analysis mode, using a fixed magnitude impulsive velocity change, it provides the necessary data for planning the burn parameters. In insert mode, it uses the orbit propagator function to integrate the spacecraft state through the AKM burn. In this case, an AKM thrust profile and specific impulse are applied to the necessary data for planning the burn parameters to obtain the best possible drift orbit. The apogee burn planning simulation for orbital transfer of Koreasat has been performed using the AKM firing software. And the result of this simulation has been analyzed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.1
• /
• pp.79-87
• /
• 2015

In this paper, a real time on-board orbit determination method using the extended kalman filter is suggested and its performance is analyzed in the environment of the orbit. Considering the limited on-board resources, the $J_2$ orbit propagate model and the GPS navigation solution are used for on-board orbit determination. The analysis result of the on-board orbit determination method implemented in DubaiSat-2 showed that position and velocity error are improved from 70.26 m to 26.25 m and from 3.6 m/s to 0.044 m/s, respectively when abnormal excursion errors is removed in the GPS navigation solution.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.40.1-40.1
• /
• 2009

미래 한국의 달궤도선 임무에 대비하여 달 근접 궤도 전파기인(orbit propagator) YSPLOP ver. 1(Yonsei Lunar Precise Orbit Propagator version 1)을 개발 하였다. 개발된 궤도 전파기의 성능은 상용 소프트웨어인 STK Astrogator를 이용하여 검증되었다. 개발된 궤도 전파기를 이용, 달 궤도선의 운용에 있어서 다양한 섭동력들이 궤도선의 수명(orbital decay)에 미치는 영향을 분석하였다. YSPLOP ver. 1은 정밀한 달 중심 탐사선의 위치산출을 위하여 M-EME2000 (Moon-Centered, Earth Mean Equator and Equinox of J2000) 좌표계, M-MME2000 (Moon-Centered, Moon Mean Equator and IAU vector of epoch J2000) 좌표계 그리고 M-MEPMD (Moon-Centered, Moon Mean Equator and Prime Meridian) 좌표계를 이용하여 탐사선의 상태(state) 정보를 산출한다. 또한 태양, 지구, 달, 화성, 목성의 중력에 의한 섭동력 및 태양풍에 의한 영향을 포함할 수 있도록 설계되었으며, 달 근접 궤도선의 궤도 운동에 가장 큰 영향을 미칠 수 있는 섭동력인 달의 비대칭 중력장에 의한 영향 또한 고려하도록 하였다. 달의 비대칭 중력장 모델 (Lunipotential model)은 LP165p 모델이 사용되었으며 행성의 정밀한 위치 산출을 위하여 JPL의 DE405 천체력이 사용되었다. 개발된 궤도 전파기를 이용, 달고도 100 km, 궤도 경사각 $90^{\circ}$인 달 중심의 극궤도를 약 30일 동안 전파한 결과, YSPLOP ver. 1의 성능은 STK Astrogator와 비교하여 보았을 때 약 수 m의 오차를 보이는 것으로 확인되었다. 달의 극궤도 탐사선의 궤도 수명을 분석한 결과, 최소한 달의 비대칭 중력장이 70 by 70 이상으로 고려되어야 함을 확인하였으며 이때 달 궤도선의 수명은 약 160일으로 나타났다. 아울러 달 근접 환경에서의 지구 중력에 의한 섭동력은 달 궤도선의 운동에 있어서 무시 할 수 없는 정도의 많은 영향을 끼치고 있음을 확인하였다. 이 연구를 통하여 개발된 궤도 전파기는 미래 한국의 달 궤도선 및 착륙선의 임무 설계시 사용 될 수 있다. 또한 이 연구에서 제시된 달 근접 환경에서의 다양한 섭동력들이 달 궤도선의 운동에 미치는 영향에 대한 해석 결과는 추후 달 근접 임무 설계시 고려되어야 하는 섭동력들의 기본 사양을 제공할 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1966-1971
• /
• 2004

As the remote sensing satellite technology grows, the acquisition of accurate attitude and position information of the satellite has become more and more important. Due to the data processing limitation of the on-board orbit propagator and attitude determination algorithm, it is required to develop much more accurate orbit and attitude determination, which are so called POD (precision orbit determination) and PAD (precision attitude determination) techniques. The sensor and attitude dynamics simulation takes a great part in developing a PAD algorithm for two reasons: 1. when a PAD algorithm is developed before the launch, realistic sensor data are not available, and 2. reference attitude data are necessary for the performance verification of a PAD algorithm. A realistic attitude dynamics and sensor (IRU and star tracker) outputs simulation considering their physical characteristics are presented in this paper, which is planned to be used for a PAD algorithm development, test and performance verification.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.24.1-24.1
• /
• 2011

2006년도부터 개발을 시작한 한국천문연구원 궤도 전파 및 추정(KASI Orbit Propagator and Estimator: KASIOPEA)소프트웨어는 다양한 과제와 연관되어 개발을 추진했다. 초기 이 소프트웨어는 GNSS 자료처리를 염두에 두고 개발을 시작하였으나, 현재 한국천문연구원 우주측지연구그룹에서 추진하는 GNSS 자료처리와 별도로 한국천문연구원에서 1986년도부터 개발을 시작한 우주물체 궤도 추적, 전파 및 추정을 새로운 개발 목표로 재추진하게 되었다. 이 소프트웨어의 개발 요구사항은 광학감시 체계의 운영을 전제로 하고 있어 전파 및 레이저 위성 추적 시스템과 별도로 정의되어 있다, 이 요구사항 분석이 완료되면 이 소프트웨어의 최종 성능에 대한 예비 결정이 이뤄질 것으로 사료된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.881-891
• /
• 2017

In this paper, we described the new TLE(Two Line Elements) generation method based on the compansation technique by using past TLEs(Two Line Elements) released by JSpOC(Joint Space Operation Center) in USA to reduce the orbit prediction error for long duration of SGP4(Simplified General Perturbations 4) which is a simplifed and analytical orbit propagator. The orbital residuals the orbital difference between two ephemeris for the first TLE only and for the all TLEs updated by JSpOC for the past some period was applied for this algorithm instead of general orbit determination software. Actually, in these orbital residuals, the trend of orbit prediction error from SGP4 is included. Thus, it is possible to make a simple residual function from these orbital residulas by using the fitting process. By using these residual functions with SGP4 prediction data for the currnet TLE data, the compansated orbit prediction can be reconstructed and the orbit prediction error for long duration of SGP4 is also reduced. And it is possible to generate new TLE data from it. In this paper, we demonstraed this algorithm in simple simulation, and the orbital error is decreased dramatically from 4km for the SGP4 propagation to 2km for it during 7 days as a result.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.361-370
• /
• 2004

The DSN(Deep Space Network) measurement model for interplanetary navigations which is essential for precise orbit determination has been developed. The DSN measurement model produces fictitious DSN observables such as range, doppler and angular data, containing the potential observational errors in geometric data obtained from orbit propagator. So the important part of this research is to model observational errors in DSN observation and to characterize the errors. The modeled observational errors include the range delay effect caused by troposphere, ionosphere, antenna offset, and angular refraction effect caused by troposphere. Non-modeled errors are justified as the parameters. All of these results from developed models show about $10\%$ errors compared to the JPL's reference results, that are within acceptable error range.

• Journal of Space Technology and Applications
• /
• v.1 no.1
• /
• pp.23-32
• /
• 2021

The high-level Space Situational Awareness (SSA) objective is to provide to the users dependable, accurate and timely information in order to support risk management on orbit and during re-entry and support safe and secure operation of space assets and related services. Therefore the risk assessment for the re-entry of space objects should be managed nationally. In this research, the Software for Re-Entry Prediction of space objects (SREP) was developed for national SSA system. In particular, the rate of change of the drag coefficient is estimated through a newly proposed Drag Scale Factor Estimation (DSFE), and is used for high-precision orbit propagator (HPOP) up to an altitude of 100 km to predict the re-entry time and position of the space object. The effectiveness of this re-entry prediction is shown through the re-entry time window and ground track of space objects falling in real events, Grace-1, Grace-2, Tiangong-1, and Chang Zheng-5B Rocket body. As a result, through analysis 12 hours before the final re-entry time, it is shown that the re-entry time window and crash time can be accurately predicted with an error of less than 20 minutes.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.351-360
• /
• 2004

An orbit propagation software for the Mars orbiting spacecraft has been developed and verified in preparations for the future Korean Mars missions. Dynamic model for Mars orbiting spacecraft has been studied, and Mars centered coordinate systems are utilized to express spacecraft state vectors. Coordinate corrections to the Mars centered coordinate system have been made to adjust the effects caused by Mars precession and nutation. After spacecraft enters Sphere of Influence (SOI) of the Mars, the spacecraft experiences various perturbation effects as it approaches to Mars. Every possible perturbation effect is considered during integrations of spacecraft state vectors. The Mars50c gravity field model and the Mars-GRAM 2001 model are used to compute perturbation effects due to Mars gravity field and Mars atmospheric drag, respectively. To compute exact locations of other planets, JPL's DE405 ephemerides are used. Phobos and Deimos's ephemeris are computed using analytical method because their informations are not released with DE405. Mars Global Surveyor's mapping orbital data are used to verify the developed propagator performances. After one Martian day propagation (12 orbital periods), the results show about maximum ${\pm}5$ meter errors, in every position state components(radial, cross-track and along-track), when compared to these from the Astrogator propagation in the Satellite Tool Kit. This result shows high reliability of the developed software which can be used to design near Mars missions for Korea, in future.