• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.149-162
• /
• 2005

The aim of this study was to measure the suprathreshold taste intensity for sucrose, NaCl, citric acid, and quinine HCl in Korean young people using a whole-mouth, sip-and-spit procedure, employing the method of magnitude matching. The results were analysed in terms of sex, taste preference, and smoker or nonsmoker. One hundred twenty three subjects (61 male and 62 female, mean age of 25.2$\pm$2.1 years) were included for the study. Subjects were instructed to give nonmodulus magnitude estimates to the intensities of five concentrations each of sucrose, NaCl, citric acid, and quinine HCl; distilled water; 6 loudness levels of a 1,000-Hz tone, using the same 9-point intensity scale. Each of the 21 taste stimuli and 6 auditory stimuli are presented in random order twice. The auditory function is used to assess the absolute intensity function of the subject's taste system. The results were as follows; 1. The perceived taste intensity for sucrose, NaCl, citric acid, and quinine HCl increased progressively as the concentrations of taste solutions were increased. Most of the subjects are standing within the zone of mean value $\pm$1standard deviation in their total perceived intensity score, and nobody is outside the limit of mean value - 2standard deviation. 2. There were not significant difference in total perceived intensities for sucrose, NaCl, citric acid, and quinine HCl between males and females. 3. There were not significant difference in total perceived intensities for sucrose, NaCl, citric acid, and quinine HCl according to the difference in taste preference. 4. There were not significant difference in total perceived intensities for sucrose, NaCl, citric acid, and quinine HCl between smokers and non-smokers in males.

• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.257-268
• /
• 2005

It is recently suggested in Korea that Resource-Based Relative Value Scale (RBRVS) is an alternative plan of Korean Dental Fee Schedule which has been operated on a fee-for-service basis since the introduction of the national health insurance program in 1977. RBRVS applicable to diagnosis and treatment for temporomandibular disorders (TMD), a common cause of orofacial pain, is needed to be estimated in Korea and the establishment of the standard terminology of dental procedures for TMD should be preceded. The purposes of this study were to develop a new classification system of health care service items for TMD and to investigate time needed for each item, which enables RBRVS to be estimated prior to establishment the payment system of health care services for TMD. The dental service items for TMD in this study were categorized through Delphi process which 10 TMD specialists were participated in and the time needed for each service item was investigated by work sampling and time study method with a stopwatch. The results of this study demonstrated the new classification system of dental services for TMD comprising 151 service items and exhibited the average time for each items ranging from 7.22 min for cold laser therapy to 171.71 min for direct fabrication of anterior repositioning splint. Conclusively, it is suggested that the classification system for TMD developed in this study, considering specific characteristics on basis of resources for health care service of dental procedures, should be helpful to estimate payment level for each service item.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.3
• /
• pp.217-227
• /
• 1992

The purpose of this paper is to investigate changes in soft tissue in 22 patients treated by vertical ramus osteotomy and sagittal split ramus osteotomy for the correction of mandibular prognathism. 22 individuals, 12 males and 10 females, were selected from the patients with mandibular prognathism at the Department of Oral and Maxillofacial Surgery, Colledge of Dentistry, Kyung Hee University. Patient were analyzed with cephalogram taken 1 week before and at least 6 weeks after surgery under the same condition. Measurements were made constructed hard tissue and sop tissue points located on each before-and-after film tracing. Comparision were made of these figures to estimate the amount that the soft tissue followed the hard tissue structures in each surgical procedure : ratio of sop and hard tissue changes were formulated. The results were as follows. 1. The horizontal changes of Pogs and Bs as a ratio of the horizontal changes of Pog and B point were 1.02 and 1.16 respectively. 2. One millimeter of posterior changes at Pog resulted in 0.86mm of posterior change at Li and 0.09mm of posterior change at Ls. The greatest amount of sop tissue change occurred at Pogs, with substantially less posterior displacement at Bs, even less at Li and at least at Ls. 3. The ratio of LI to Li was 1:0.81 and the ratio of LI to Ls was not significant.(1 : 0.17) 4. The ULA(Cm-Sn-Ls) and the relative lower lip projection (LLP) was incnease4 but the relative upper lip projection (ULP) was slightly decreased 5. The angular change of the upper lip inclined angle (Ls-Sn/ANS-PNS) and lower lip inclined angle(Li-Pogs/Me-Go) expressed as a ratio of the posterior change of Pog were 0.57 and 0.20 respectively. 6. The ratio of the lower anterior facial height change of the soft tissue(Sn-Mes) to the hard tissue(ANS-Gn) were 0.78 and and the ratio of vertical height changes of the hard tissue and sop tissue to the posterior change of the Pog were 0.18 and 0.19 respectively. 7. The sop tissue angular change of facial convexity(G-Sn-Pogs) expressed as a ratio of the angular change of the hard tissue angle of facial convexity(N-A-Pog) was 1.24.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.30-36
• /
• 1991

Various nerves from many areas of body can be used as a donor of autogenous nerve graft in the microneurosurgical repair of the oral and maxillofacial region. In the grafting procedure of nerve repair, the best results will be achieved with a maximum approximation of fascicular surface at both the porximal and the distal stumps. Therefore, appropriate selection of donor nerve will bring out the best results. The sural nerve has been used as one of the most popular donor nerve in the microneurosurgical repair of the oral and maxillofacial region. The authors examined the fascicular characteristics of the human sural nerve microscopically and compare this results with our previous report of the greater auricular nerve and that of the inferior alveolar nerve.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.274-287
• /
• 2000

The use of dental implants has increased tremendously in recent years and is expected to increase even more in the future. The successful outcome of any implant procedure is surely dependent on interrelationship of the various components of an equation that includes biocompatibility of implant material, macroscopic and microscopic nature of the implant surface, the status of implant bed, surgical technique, undisturbed healing phase and subsequent prosthetic design and long-term loading phase. The purpose of this study was to clarify the effects of adrenalectomy on the osseointegration of pure titanium implants. Seventy rats, 11 weeks of age, were divided into two groups : an adrenalectomized group and a control group. Titanium screw implant(diameter, 2.0mm; length, 3.5mm) was placed into left tibia of 70 rats, 35 in control group and 35 in the experimental group. The rats were sacrificed at different time interval (1, 2, 3, 4, 6, 8, and 12 weeks after implantation) for histopathologic observation, histomorphometric analysis and immunohistochemistry with fibronectin and CD44 antibody. The results obtained from this study were as follows: 1. Histopathogically, findings, newly formed bone was seen at 3 weeks control group and became lamellar bone at 12 weeks. At 6 weeks, lipocytes were observed in bone marrow space. Thickness of regenerated trabecular bone increased till 6 weeks after then, that decreased gradually. 2. By histomorphometric analysis, marrow bone density and contact ratio of marrow bone to implant decreased significantly from 8 to 12 weeks in experimental group compared to control group and also total bone to implant contact ratio decreased significantly from 4 to 12 weeks in experimental group compared to control group. 3. Fibronectin immunoreactivity was very strong at 3 and 4 weeks control group. And after that reduced gradually. But it was continuously strong from 1 to 12 weeks experimental group. 4. CD44 immunoreactivity was very strong in the newly formed osteoblasts at 3 and 4 weeks control group. But it reacted minimally later. However, it reacted continuously strong from 3 to 12 weeks experimental group. From these results, bone to implant contact ratio decreased gradually from 4 weeks in adrenalectomized group compared to control group. CD44 and fibronectin immunoreactivities were strong at all times in adrenalectomized rats. Therefore, it could be stated that immature bone remained continuously for a long time and not readily proceeded into mature status.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.2
• /
• pp.82-86
• /
• 2016

Lowe syndrome is X-linked gene disorder, characterized by cataracts, renal dysfunction and brain abnormalities. Oral healthcare of young patients with Lowe syndrome could be easily neglected due to the uncooperative behavior or other systemic condition of the child. We are presenting a case of successful treatment under general anesthesia with uncooperative child with Lowe syndrome. A 3-year old boy with Lowe syndrome visited Seoul National University Dental Hospital for multiple caries. He had been suffering from congenital cataract, medullary nephrocalcinosis and hypotonia. Multiple caries were observed from clinical and radiographic examination. Concerning behavior management problem and possibility of aspiration due to hypotonia, dental treatment under general anesthesia was planned. Left upper primary first molar was extracted to prevent further infection. Other teeth were treated with Stainless steel crown or composite resin restoration based upon the extent and the severity of dental caries. Under general anesthesia, dental procedure was carried out successfully and safely. Considering uncooperative behavior and other medical conditions of the patient, general anesthesia could be effective. Home oral care and periodic visit to dental clinic should be emphasized to the caregiver of patient with Lowe syndrome, considering the susceptibility of dental caries and other oral manifestation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.4
• /
• pp.263-273
• /
• 2016

In the implant prosthetic procedure, the soft tissue reaction was varied with the material and surface treatment of the abutment. It may be the cause of the peri-implantitis, and hence it can affect the long-term prognosis of the implant prosthesis. Titania and zirconia abutment presented superior biocompatibility and stable soft tissue reaction, while gold alloy abutment showed unfavorable reaction sometimes. A soft tissue reaction can be differed by the surface characteristics even in the same material type. Because rougher surface induces a bacterial attachment, the part contacting a soft tissue should have smooth surface. Additional surface treatment can enhance the cellular response without increasing bacterial attachment. Repeated removal and insertion of the abutment and the shape of the abutment may affect the soft tissue reaction, also. Ultrasonic cleaning and argon plasma cleaning are effective way to clean the retained micro-dust on the customized abutment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.32.1-32.4
• /
• 2020

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions: This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.127-137
• /
• 2022

Zirconia is fabricated through various processes. Each element in fabricating process can affect the physical properties of the definitive prosthesis. In particular, both the milling process and the sintering process can affect the final integrity of the zirconia prosthesis. Most of the milling machines adopt the ultra-precision 5-axis machining method, and the results vary depending on which milling method was used and how the milling equipment was managed. Milling blocks are selected according to cutting efficiency and aesthetic reproducibility. The sintering method can affect the grain growth and optical properties, and an accurate evaluation can be made only with additional research on the recent speed sintering procedure. Not only the sintering temperature but also the temperature holding time can affect the quality of definitive prosthesis.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.138-149
• /
• 2022

The clinical applicability of ceramics can be increased by analyzing the causes of fractures after fracture testing of dental ceramics. Fractography to analyze the cause of fracture of dental ceramics is being widely applied with the development of imaging technologies such as scanning electron microscopy. Setting the experimental conditions is important for accurate interpretation. The fractured specimens should be stored and cleaned to avoid contamination, and metal pretreatment is required for better observation. Depending on the type of fracture, there are dimple rupture, cleavage, and decohesive rupture mainly observed in metals, and fatigue fractures and conchoidal fractures observed in ceramics. In order to reproduce fatigue fracture in the laboratory, which is the main cause of fracture of ceramics, a dynamic loading for observing slow crack growth is essential, and the load conditions and number of loads must be appropriately set. A typical characteristic of a fracture surface of ceramic is a hackle, and the causes of fracture vary depending on the shape of hackle. Fractography is a useful method for in-depth understanding of fractures of dental ceramics, so it is necessary to follow the exact experimental procedure and interpret the results with caution.