• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.90-93
• /
• 2015

The fibula free flap has now become the most reliable and frequently used option for mandible reconstruction. Recently, three dimensional images and printing technologies are applied to mandibular reconstruction. We introduce our recent experience of mandibular reconstruction using three dimensionally planned fibula free flap in a patient with gunshot injury. The defect was virtually reconstructed with three-dimensional image. Because bone fragments are dislocated from original position, relocation was necessary. Fragments are virtually relocated to original position using mirror image of unaffected right side of the mandible. A medical rapid prototyping (MRP) model and cutting guide was made with 3D printer. Titanium reconstruction plate was adapted to the MRP model manually. 7 cm-sized fibula bone flap was designed on left lower leg. After dissection, proximal and distal margin of fibula flap was osteotomized by using three dimensional cutting guide. Segmentation was also done as planned. The fibula bone flap was attached to the inner side of the prebent reconstruction plate and fixed with screws. Postoperative evaluation was done by comparison between preoperative planning and surgical outcome. Although dislocated condyle is still not in ideal position, we can see that reconstruction was done as planned.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.158-166
• /
• 2009

The application of CT with basis on 3 dimensional-reconstruction is getting more widely practiced. With the data obtained from cone-beam computed tomography(CBCT), not only the diagnosis of the patient with skeletal abnormality but also the virtual simulation of the orthognathic surgery were performed and its application would be popular in orthodontic field. We reported a case, a 19-year old man who was diagnosed mandibular prognathism and required orthognatic surgery. In this case, the virtual orthognathic surgery was simulated and surgical wafer was fabricated by using CBCT data. That wafer was applied the actual orthognathic surgery. After preoperative orthodontic treatment, we prepared surgery as follows. : (l)Acquisition of 3D image data, (2)Reconstruction of 3-dimensional virtual model, (3)Virtual model surgery, (4)Extraction of stere-olithographic image, (5)Check-up for occlusal interference, (6)Fabrication of surgical stent by stereolithography. Bilateral sagittal split ramus osteotomy was operated and used stereolithographic surgical stent. 1 month later, we superimposed CBCT datas of virtual surgery and that of actual surgery, and then compared the result. CT data's application for othognathic surgery yielded satisfactory outcomes.

• Journal of Periodontal and Implant Science
• /
• 제29권4호
• /
• pp.943-953
• /
• 1999

Severe alveolar ridge deficiency can prevent ideal implant placement. Ridge augmentation procedures are necessary to regain lost alveolar structures. The corticocancellous block bone graft was harvested from the mandibular symphysis. This block bone was fixed to the lateral aspect of the ridge with titanium screws. Seven months later, the autogenous bone graft was reentered and sufficient bone volume was gained to allow implant placement. The fixation screws were removed and 3I implants were inserted. No complication and postoperative alteration in chin contour were observed. This report demonstrates that chin graft offers a predictable alternative in the reconstruction of ridge deficiency for implant placement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.37.1-37.5
• /
• 2016

Background: The dimensions and shape of the forehead determine the esthetics of the upper third of the face. Korean young people consider a broad and smooth, rounded forehead more attractive. As a result, frontal augmentation becomes more popular in patients with dentofacial deformities. Various surgical procedures and materials have been used in frontal augmentation surgery, with associated advantages and disadvantages. Silicone is a good candidate for frontal augmentation. The author presents two cases of esthetic frontal augmentation with a prefabricated silicone implant in female patients with dentofacial deformities. Case presentation: In case 1, a 24-year-old female patient underwent frontal augmentation surgery with simultaneous maxillomandibular and zygomatic osteotomies to correct facial asymmetry. A silicone implant was fabricated preoperatively using a positive template stone mold of her forehead. In case 2, a 23-year-old female patient underwent total facial contouring surgery including frontal augmentation for improved facial esthetics. A computed tomography (CT)-guided rapid prototype (RP) model was used to make the silicone implants. The operative procedure was safe and simple, and the silicone implants were reliable for a larger degree of frontal augmentation. Six months later, both patients had recovered from the surgery and were satisfied with their frontal shape and projection. Conclusions: Frontal augmentation with silicone implants can be an effective adjuvant strategy to improve facial esthetics in patients with a flat and narrow forehead who undergo orthognathic reconstruction or total facial contouring surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.12.1-12.9
• /
• 2020

Coronavirus is an enveloped virus with positive-sense single-stranded RNA. Coronavirus infection in humans mainly affects the upper respiratory tract and to a lesser extent the gastrointestinal tract. Clinical symptoms of coronavirus infections can range from relatively mild (similar to the common cold) to severe (bronchitis, pneumonia, and renal involvement). The disease caused by the 2019 novel coronavirus (2019-nCoV) was called Covid-19 by the World Health Organization in February 2020. Face-to-face communication and consistent exposure to body fluids such as blood and saliva predispose dental care workers at serious risk for 2019-nCoV infection. As demonstrated by the recent coronavirus outbreak, information is not enough. During dental practice, blood and saliva can be scattered. Accordingly, dental practice can be a potential risk for dental staff, and there is a high risk of cross-infection. This article addresses all information collected to date on the virus, in accordance with the guidelines of international health care institutions, and provides a comprehensive protocol for managing possible exposure to patients or those suspected of having coronavirus.

• 대한치과보철학회지
• /
• 제55권3호
• /
• pp.279-285
• /
• 2017

구강암에 대한 외과적 처치로 구강 내 광범위한 경조직, 연조직을 제거한 환자는 저작, 연하, 발음 등의 기능적 문제와 치열, 안모의 심미적 문제를 갖게 된다. 악골 재건 후에도 치조골 등 합병증으로 인해 가철성 보철물의 유지 및 지지를 받는데 제한적이다. 임플란트 지지 고정성 보철물은 이러한 환자들에게 적절한 보철수복 방법이 되어 왔다. 본 증례는 하악 재건 후 computer-aided design과 computer-aided manufacturing을 이용하여 지르코니아 프레임워크 상부에 단일 구조 지르코니아 크라운을 제작하여 현재 치열의 기능적, 심미적 회복을 하여 이에 보고하고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권3호
• /
• pp.246-249
• /
• 1998

본 증례는 우측 하악 후구치부위에 생긴 편평상피세포암종의 절제후 생긴 결손부를 미세혈관수술을 이용한 유리전완피부피판으로 재건한 증례로서 병소가 발생한 해부학적 위치 및 절제 후 생긴 결손부의 크기를 고려할 때, 전완피부피판을 이용하여 재건하였으며 현재까지 양호한 결과를 보이고 있다. 이와 같이 전완피부피판은 특성을 잘 이용하는 적절한 적응증에 사용된다면 어떤 다른 재건방법 보다도 성공적인 결과를 가져올 수 있으며 특히 구강악안면영역의 재건에서 그 효용성이 크다고 할 수 있다.

• Journal of Periodontal and Implant Science
• /
• 제46권4호
• /
• pp.277-287
• /
• 2016

Purpose: The purpose of this study was to evaluate the clinical efficacy of enhancing deficient interdental papilla with hyaluronic acid gel injection by assessing the radiographic anatomical factors affecting the reconstruction of the interdental papilla. Methods: Fifty-seven treated sites from 13 patients (6 males and 7 females) were included. Patients had papillary deficiency in the upper anterior area. Prior to treatment, photographic and periapical radiographic standardization devices were designed for each patient. A 30-gauge needle was used with an injection-assistance device to inject a hyaluronic acid gel to the involved papilla. This treatment was repeated up to 5 times every 3 weeks. Patients were followed up for 6 months after the initial gel application. Clinical photographic measurements of the black triangle area (BTA), height (BTH), and width (BTW) and periapical radiographic measurements of the contact point and the bone crest (CP-BC) and the interproximal distance between roots (IDR) were undertaken using computer software. The interdental papilla reconstruction rate (IPRR) was calculated to determine the percentage change of BTA between the initial and final examination and the association between radiographic factors and the reconstruction of the interdental papilla by means of injectable hyaluronic acid gel were evaluated. Results: All sites showed improvement between treatment examinations. Thirty-six sites had complete interdental papilla reconstruction and 21 sites showed improvement ranging from 19% to 96%. The CP-BC correlated with the IPRR. More specifically, when the CP-BC reached 6 mm, virtually complete interdental papilla reconstruction via injectable hyaluronic acid gel was achieved. Conclusions: These results suggest that the CP-BC is closely related to the efficacy of hyaluronic acid gel injection for interdental papilla reconstruction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.25.1-25.13
• /
• 2020

Background: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes serious acute respiratory diseases including pneumonia and bronchitis with approximately 2.3% fatality occurrence. Main body: This study argues the main concepts that need to be considered for the gradual reopening of dental offices include treatment planning approaches, fundamental elements needed to prevent transmission of SARS-CoV-2 virus in dental healthcare settings, personal protection equipment (PPE) for dental health care providers, environmental measures, adjunctive measures, and rapid point of care tests in dental offices. Conclusion: This article seeks to provide an overview of existing scientific evidence to suggest a guideline for reopening dental offices.

• 대한구순구개열학회지
• /
• 제7권1호
• /
• pp.47-61
• /
• 2004

The closure of a wide alveolar cleft and fistula in cleft patients and the reconstruction of a maxillary dentoalveolar defect in bilateral cleft lip and palate (BCLP) patients are challenging for both orthodontists and oromaxillofacial surgeons. It is due to the difficulty in achieving complete closure by using local attached gingiva (palatal flap) and the great volume of bone required for the graft. In this article, the authors used bifocal distraction-compression osteosynthesis(BDCO) to create a segment of new alveolar bone and attached gingiva for the complete approximation of a wide alveolar cleft/fistula and the reconstruction of a maxillary dentoalveolar defect. Since the alveoli and gingivae on both ends of the cleft were approximated after BDCO, the need for extensive alveolar bone grafting was eliminated. It also could create new alveolar bone and gingiva for orthodontic tooth movement and implant.