• 대한공간정보학회지
• /
• 제18권4호
• /
• pp.31-39
• /
• 2010

이 연구에서는 측지 측량 분야의 GPS 사용자들이 해외 기관에서 제공하는 온라인 자료처리 서비스를 이용해 측점의 정밀좌표를 손쉽게 획득할 수 있도록 여러 기관에서 운영 중인 온라인 자료처리 서비스 간의 성능을 비교하였다. 온라인 GPS 자료처리 서비스 간의 성능비교를 위해 APPS, CSRS-PPP, AUSPOS 그리고 OPUS를 이용해 국내외 상시관측소 7곳의 좌표를 산출하였고, IERS와 국토지리정보원에서 제공하는 고시좌표와 비교하여 정확도를 분석하였다. 국외 상시관측소를 이용한 분석에서는 평균 9.3mm의 수평좌표 정확도에서 APPS, AUSPOS, OPUS, CSRS-PPP의 순서로 정확도가 높은 것으로 나타냈다. 국내 관측소의 경우 국외 분석사례와 유사하게 AUSPOS, APPS, OPUS, CSRS-PPP 순서로 높은 정확도를 보인 반면, 수평좌표 정확도는 평균 37.6mm를 기록하였다. 또한 국내 결과는 국외 결과보다 평균 3cm 큰 3차원 좌표오차를 보였으며, 북쪽 방향으로 약 3cm의 편의가 존재함을 확인하였다.

• 한국음향학회지
• /
• 제36권1호
• /
• pp.70-77
• /
• 2017

대역폭 확장 기술은 300 ~ 3,400 Hz 대역의 협대역 음성 신호를 50 ~ 7,000 Hz 대역의 광대역 음성신호로 확장하여 음질, 명료도, 그리고 자연성을 높이는 기술이다. 본 논문에서는 협대역 음성 정보를 이용하여 광대역 음성신호를 추정하는 인공 대역폭 확장 기술을 설계하여, 오푸스(Opus) 오디오 복호화기에 내장시킴으로써, 대역폭 확장 모듈에서의 LPC(Linear Prediction Coding) 분석 및 LSF(Line Spectral Frequencies) 해석과 관련된 계산량을 감소시켰고 알고리즘 지연도 줄였다. 이를 위해 현재 다양한 분야에 적용되고 있는 딥 러닝 기술 중 하나인 심층 신뢰 신경망(Deep Belief Network, DBN) 방식을 스펙트럼 포락선 확장에 도입하여 전통적인 코드북 매핑법보다 더 좋은 품질의 스펙트럼을 만들 수 있었다.

• Archives of Plastic Surgery
• /
• 제46권4호
• /
• pp.303-310
• /
• 2019

Background Prosthetic hands with a myoelectric interface have recently received interest within the broader category of hand prostheses, but their high cost is a major barrier to use. Modern three-dimensional (3D) printing technology has enabled more widespread development and cost-effectiveness in the field of prostheses. The objective of the present study was to evaluate the clinical impact of a low-cost 3D-printed myoelectric-interface prosthetic hand on patients' daily life. Methods A prospective review of all upper-arm transradial amputation amputees who used 3D-printed myoelectric interface prostheses (Mark V) between January 2016 and August 2017 was conducted. The functional outcomes of prosthesis usage over a 3-month follow-up period were measured using a validated method (Orthotics Prosthetics User Survey-Upper Extremity Functional Status [OPUS-UEFS]). In addition, the correlation between the length of the amputated radius and changes in OPUS-UEFS scores was analyzed. Results Ten patients were included in the study. After use of the 3D-printed myoelectric single electromyography channel prosthesis for 3 months, the average OPUS-UEFS score significantly increased from 45.50 to 60.10. The Spearman correlation coefficient (r) of the correlation between radius length and OPUS-UEFS at the 3rd month of prosthetic use was 0.815. Conclusions This low-cost 3D-printed myoelectric-interface prosthetic hand with a single reliable myoelectrical signal shows the potential to positively impact amputees' quality of life through daily usage. The emergence of a low-cost 3D-printed myoelectric prosthesis could lead to new market trends, with such a device gaining popularity via reduced production costs and increased market demand.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.4031-4040
• /
• 2010

건축의 시작은 벽체를 구축하는 작업이다. 고대 로마건축에서의 석축기법은 매우 다양하며 새로운 기술의 반복적인 실험을 통하여 로마제국시대의 위대한 건축물들을 완성할 수 있었다. 본 논문에서는 고대로마의 석축기법을 양식적, 구조적, 재료적 또한 의장적인 다양한 관점에서 연구하여 그 변화의 과정을 단계적으로 분석하였으며 심도있는 자료의 수집과 정리를 통하여 로마건축이 인류에게 남긴 위대한 유산의 일부분을 깊이 있게 파헤쳐 보았다. 아직도 우리에게 영향력을 미치고 있는 로마건축의 연속성을 뒷받침 하는 것은 건축의 시작인 석축기술에 있다는 것도 재확인 할 수 있었다. 다양한 실험적 정신이 훌륭한 건축물이 만들어지는 토대가 됨을 로마건축은 보여주고 있다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권2호
• /
• pp.143-152
• /
• 2018

Purpose: In this paper, we propose calculation methods of Maintenance Float (M/F). Results of each method are compared and verified by using commercial tool (OPUS Suite). As modern weapon systems become more expensive, we need to find the most economical and efficient method to achieve the target operational availability (Ao). Methods: Three kinds of methods (Considering the number of CSP, Applying the Poisson distribution, and Applying M&S Tool) are used to find the number of M/F. Three methods (Considering the number of CSP, Applying the Poisson distribution, and Applying M&S Tool) were used to estimate the required number of M/F. The analysis results were verified by SIMLOX. The cost of equipment calculated by each analysis method was compared and the cause of the difference was analyzed. Conclusion: Ao and cost must be considered to find the optimal number of M/F. In general, it costs more to increase availability. But the cost is not necessarily proportional to Ao. Therefore, it is better to compare the calculation method and determine the final MF quantity.

• 대한전자공학회논문지
• /
• 제25권6호
• /
• pp.637-646
• /
• 1988

The CMOS physical parameters are extracted using by processing models in fabrication steps, processing parameters, fabrication disturbances, control parameters. Statistical CMOS process and device simulator is proposed to evaluate the effect of inherent fluctuations in IC fabrication. Using this simulator, we perform worst case analysis in terms of statistically independent disturbances and compare this proposed method to Monte Carlo method, previous Worst Case method. And simulation results with this proposed method are more accurate than the past worst case analysis. This package is written in C language and runs on a IBM PC AT(OPUS).

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.517-539
• /
• 2011

This paper presents the seismic responses of a 1:5-scale five-story reinforced concrete building model, which represents a residential apartment building that has a high irregularity of weak story, soft story, and torsion simultaneously at the ground story. The model was subjected to a series of uni- and bi-directional earthquake simulation tests. Analysis of the test results leads to the following conclusions: (1) The model survived the table excitations simulating the design earthquake with the PGA of 0.187 g without any significant damages, though it was not designed against earthquakes; (2) The fundamental mode was the torsion mode. The second and third orthogonal translational modes acted independently while the torsion mode showed a strong correlation with the predominant translational mode; (3) After a significant excursion into inelastic behavior, this correlation disappeared and the maximum torsion and torsion deformation remained almost constant regardless of the intensity of the two orthogonal excitations; And, (4) the lateral resistance and stiffness of the critical columns and wall increased or decreased significantly with the large variation of acting axial forces caused by the high bi-directional overturning moments and rocking phenomena under the bi-directional excitations.

• 한국의류산업학회지
• /
• 제11권2호
• /
• pp.231-241
• /
• 2009

Embroidery is one of the oldest methods of textiles surface decoration. The masterpiece "Tapisserie de Bayeux," is one of the earliest Medieval embroideries. Embroidery was popular on a broad scale with introduction of what was called Opus Anglicanum("English work") in the 13th century. France had been producing sophisticated embroideries since the 16th century. England was the country producing the greatest quantity of embroideries of the best quality in the 17th century. Until the 17th century, the Church was the most important patron of needlework. Then a shift in emphasis occurred towards the domestic embroidery. English 17th century domestic embroidery reached a high point of technical brilliance and charm. In France, embroidery was produced on hangings as well as costume. 18th century interest in embellishing the domestic environment, embroideries became much more finely detailed than those of the 17th century with the use of finer wool and silk threads. French silk were the finest in the world, and their embroidery was arguably equally fine both in furnishing textiles and on costumes. "Art Needlework" was the major movement in embroidery in the late 19th century. The Royal School of Needlework was founded in 1872, followed by similar institutions around Britan. Splendid fashion embroidery of French haut-couture that was represented to Lesage atelier in 20th century.

• 한국벤처창업학회:학술대회논문집
• /
• 한국벤처창업학회 2023년도 추계학술대회
• /
• pp.91-96
• /
• 2023

글로벌로 핵심기술 경쟁 및 최상의 기술을 적용한 제품 제조를 실현해야 하는 ICT 분야의 수출 제조 중소기업은 내부, 외부적인 환경적 요인뿐 아니라 다양한 위기상황을 겪게 된다. 이러한 위기상황을 극복하고자 기업 자체적인 전략을 다방면으로 모색하고 실행하여 성공한 수출 제조 중소 벤처기업인 '(주)쎄믹스'가 있다. 2000년에 설립한 (주)쎄믹스는 반도체 검사장비 중 하나인 Wafer Prober 제조 전문기업으로, 'Simple Perfection'이라는 슬로건 아래 23년간 'OPUS' 및 'OPERA'를 생산, 판매에 전념하고 있는 글로벌 강소기업이며, 지속적인 핵심기술 연구개발을 통해 품질혁신에 성공하였고 글로벌 반도체 검사장비 시장에서 기술적 신뢰와 브랜드 명성을 인정받고 있는 벤처기업이다. 현재 (주)쎄믹스의 입지를 구축하기까지 수출 제조기업으로서 겪은 환율관리 실패인 키코손실에서 기인한 회사 위기를, 자체적으로 기술혁신, 조직혁신, 핵심인재 육성 등 전략적 기업혁신에 성공하여 회사의 존폐위기였던 상황을 극복하였다. 우선 키코손실을 떨쳐내고 새로이 시작하기 위한 S사와의 합병, 분할 후 조직 내부에 기업가정신을 고취하였고 핵심기술을 발굴하여 세계일류상품 인증, 월드클래스 300 선정 및 완수, 6개국에 7개의 자회사 설립 통한 조직혁신, 과감한 인재등용, 인재육성 위한 사내 컨퍼런스 제도 도입, TRIZ 등을 통한 과감한 교육혁신, 인재를 위한 특별한 복지정책 구현 등을 실천하였다. 본 연구는 '(주)쎄믹스'의 위기극복 사례를 통해 일본의 두 곳 대기업만이 누리고 있던 Wafer Prober 장비 시장에서 독자적인 글로벌 판로개척을 통한 자생적 성장시스템 구축과 창의적이고 자기 주도적인 혁신체제를 구축하는 계기를 제공하여 다양한 위기상황에 직면하였거나 위기를 미연에 방지하여야 할 중소기업인과 임직원들에게 성공 사례를 제공하고자 하였다.

• 미술이론과 현장
• /
• 제1호
• /
• pp.23-48
• /
• 2003

Art theorists support art productions by, introducing them to the public, explaining their meanings, and playing a crucial part in the development of art. These tasks seem like their opus. Because the principles of art production and the artistic languages are quite different from the ordinaries, we need 'interpreters' who can mediate us and the artists. Art works need interpretation. And the interpretation includes not only the characteristics of the given art work, but the customs, history, and the unique qualities of the race that produced the art work. The former director of the Korean National Museum, Choi Soon-woo wrote on the characteristics of Korean art as those that stem from the poised, arbitrary, and non-elaborate state of mind. The statement of the former Director of the National Museum has its weight far greater than just a personal opinion. In fact, we encounter the same resonance of this statement over and over reproduced in the mass media. The problem lies on that it deals with not only a single art work, but the entire Korean art. And going further, this kind of remarks are already infused into every sector of our thought on art appreciation. In this paper, I argue for a re-reading of the characteristics of Korean beauty based on two reasons. First, the characteristic of art work is contemporary, thus we cannot define the characteristics of entire Korean art in a few words without the context of the period of its making. Second, Director Choi defined the characteristics that I pointed out above as 'natural' and 'nature-friendly.' Nature or being natural is not an usual word that defines the characteristics of art work, which stands for the opposite side of the nature in the binary opposition of nature/culture. To delve into these misunderstandings of Korean beauty in the popular notions of Korean art, I suggest the re-reading of three major articles on Korean art: Ryoo Jong-yeol's "Korean race and its art," Ko You-seup's reiteration of Ryoo's thesis called "Discourses in Korean Art History and Aesthetics," and Yoon Hee-soon's antithesis of Ryoo Jong-yeol titiled "Studies on Korean Art History."