• 한국방재학회 논문집
• /
• 제8권3호
• /
• pp.165-169
• /
• 2008

대부분의 하수처리장에서는 동절기에 수온저하로 인한 질산화 미생물의 활동저하 때문에 질소제거에 어려움을 많이 겪고 있다. 본 연구에서는 이러한 문제점을 해결하기 위하여 하수처리 시뮬레이션 프로그램인 GPS-X를 사용하여 각조의 HRT를 변화시켜 저 수온시 효율적인 질소제거를 위한 HRT의 조합을 도출하고자 하였다. 본 연구에서 도출한 최적의 HRT 조합은 0.3 hr/0.5 hr/1.36 hr/4.84 hr(PreAx/An/Ax/Ox)이고 이때의 T-N 제거율은 51.4%, $NH_4^+$-N는 57.3%의 제거율을 보였다.

• 복식
• /
• 제56권1호
• /
• pp.143-149
• /
• 2006

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of Acorn Shell was studied. Appropriate extraction, dyeing and mordanting condition of Acorn Shell were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of Acorn Shell solution was at 287.5nm and 294nm. The pH effect was stable in the color difference changes. The optimum temperature to extract Acorn Shell was during 1 hour in $60^{\circ}C$. The effective dyeing temperature and time of silk were $80{\sim}100^{\circ}C$, 1hour. The silk fabrics dyed with Acorn Shell appeared yellow-brown. K/S value of dyeing fabrics was increased by mordant treatment. K/S value of post-mordanting was higher than pre-mordanting. Mordanting treatment attected color change of the dyed silk. In the case of Acorn Shell light fastness of appeared more than 3-5grades by post-mordanting. Abrasion fastness of appeared more than 3-5grades. Perspiration fastness of appered more than $3{\sim}5grades$ by mordant treatment but Cu mordant treatment was $2-5{\sim}4grades$. Dry-cleaning Fastness appered more than 4 grades except Cu mordant treatment. These fastness improvement were generally effective for mordant treatment, specially Al, Sn, Cr.

• 한국약용작물학회지
• /
• 제27권6호
• /
• pp.390-396
• /
• 2019

Background: Usually ginseng seeds are sown during autumn and spring. Sowing in spring often results in poorer seedling establishment than in autumn. One of the reasons for poor germination could be cold-treatment condition for breakage of physiological dormancy during winter. Here we tested the effects of storage temperature used during cold treatment on germination. Methods and Results: Germination properties were observed after dehiscent seeds were stored as wet and dry at 2℃, -2℃, -3.5℃ and alternating temperature (AT). Seed dryness and storage temperature affected germination properties (p < 0.01). Wet and AT condition germinated highest, and wet and -3.5℃ condition germinated lowest, which was 91.2% and 1.4% respectively. Mean germination time (MGT) of the wet and AT condition was faster than other treatments at 2.4 days, and the dry and -2℃ condition was the longest. Germination performance index (GPI) was highest for wet and AT condition (37.7%) and the lowest for wet and -3.5℃ condition (0.5%). The growth of above-ground and below-ground were the best for wet and 2℃ condition, and wet seeds showed better growth than dry seeds (p < 0.01). Conclusions: For cold treatment, ginseng seeds may not be stored below -2℃ for successful germination during spring sowing.

• 한국주조공학회지
• /
• 제26권6호
• /
• pp.249-257
• /
• 2006

The effects of alloying element and the condition of heat-treatment on the strength of squeeze-cast Al-3.0 wt%Si alloy were investigated. The strength of the alloy without grain refinement was increased with increase Cu content upto 3.0 wt% and rather decreased beyond that. The tensile strength of the alloy with grain refinement increased with Cu content upto 3.0 wt% and not changed beyond that. The strength of the alloy without grain refinement increased with the Mg content. The tensile strength with grain refinement increased with the Mg content upto 0.50 wt% and then decreased beyond that. The strength of the grain refined alloy increased by individual and simultaneous additions of Cu and Mg and the maximum strength was obtained with Al-3.0 wt%Si-4.5 wt%Cu-0.50 wt%Mg alloy. The optimum heat-treatment condition for this alloy was obtained.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.100-100
• /
• 2022

This study was conducted in 2021 using Kwangpyeongok and Gangdaok, that showed good yield performance both under upland and lowland conditions in the previous year. The experiments were carried out by sowing on April 22, May 14, May 30, June 19, and July 10, with aim to determine optimum sowing date in central region of Korea. The growing degree days (GDD) required to read the flowering stage were 1375.5-1725.3℃ for upland and 1582.7-1982.4℃ for lowland condition. The lowest GDD was observed in July 10 sowing regardless of ridge formation both under lowland and upland conditions for Kwangpyeongok. However, Gangdaok showed the lowest GDD under no-ridge in lowland and high-ridge in upland, both of which were sown on June 19. The difference in GDD between no-ridge and high-ridge treatment was little depending on the sowing date. In both lowland and upland, there was no significant difference between no-ridge and high-ridge treatments in stover dry matter, ear dry matter, and TDN between no-ridge and high-ridge treatments. Under upland condition, no significant difference in biomass and TDN was observed among sowing date treatments and between varieties. Under lowland condition, biomass production was severely reduced in May 30 sowing treatment, whereas no varietal difference was observed. Reduced biomass in May 30 sowing treatment may be due to excess waterlogging and lodging by rainfall.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.556-560
• /
• 2010

부타디엔 고무 소재의 접착력을 향상시키기 위하여 대기압 표면개질방식을 적용시켰다. 평판형 플라즈마반응기의 최적의 반응조건을 구하기 위하여 반응기체(질소, 아르곤, 산소, 공기), 기체유량(30~100 mL/min), 플라즈마 처리시간(0~30초) 및 선처리제의 개질방법(GMA, 2-HEMA)을 변화시켜 실험하였다. 처리 전후의 소재의 표면변화는 SEM과 ATR-FTIR로 측정하였다. 기체의 유량과 처리시간이 증가함에 따라 접촉각이 감소하였고, 반응 기체는 공기로 유량 60 mL/min, 처리시간 5초 및 2-HEMA 첨가 선처리제를 사용하였을 때 최대의 접착박리강도를 나타내었다. 결과적으로 대기압식 평판형 플라즈마 처리방식으로 고무소재 표면의 젖음성과 접착박리강도가 개선되었음을 확인하였다.

• 접착 및 계면
• /
• 제10권3호
• /
• pp.148-153
• /
• 2009

용제 및 수용성 접착제를 도포한 몇가지 고분자 소재에 평판형 플라즈마 반응기로 플라즈마 전처리 방식을 이용하여 소재표면의 접착력을 향상 시켰다. 분위기 기류를 질소로 하고 유량을 30~100 mL/min, 반응시간은 0~30 s로 하여 밀도를 변화시킨 PU 소재를 주 물질로 하여 EVA foam, Leather (Action), Rubber 소재에 대하여 각 조건별로 플라즈마 처리시켜 처리 전후의 각 소재별 접촉각과 접착박리강도 측정을 통한 각소재의 접착력 변화와, SEM분석을 이용한 처리 전후의 표면 변화를 측정하여 플라즈마 처리의 영향과 효과를 산출하였다. 대기압 평판형 플라즈마 반응기를 이용하여 최적 조건인 기체유량 100 ml/min, 전처리시간 10 s에서 PU foam, EVA form, Leather (Action) 및 Rubber 소재의 접착력 향상을 확인하였다.

• 열처리공학회지
• /
• 제34권5호
• /
• pp.233-238
• /
• 2021

The mechanical, anti-tarnishing, and corrosion characteristics of Yuggi (Cu-22wt%Sn) alloy are greatly affected by fraction of constituent phases according to heat treatment method. The Yuggi heat-treated at 750℃ has a β1' phase of 98% or more, which is a high-temperature disordered beta phase, on the other hand, cast Yuggi that Sn is solid-solutioned into Cu consists with α-phase over 60v/o. This difference of constituent phases of Yuggi may cause a difference in dissolution of Cu under antimicrobial test condition. Nonetheless, few studies have been conducted on the effect of fraction of constituent phases and constituent phases in antimicrobial activity. In addition, few studies have also been conducted on the suitable method measuring the antimicrobial activity of Yuggi. Hence, the purpose of this study is to provide an optimum measurement method of antimicrobial activity, and to evaluate quantitatively the effect of constituent phases on antimicrobial activity.

• 생명과학회지
• /
• 제18권8호
• /
• pp.1096-1105
• /
• 2008

Kentucky bluegrass와 Tall fescue에서는 발아력을 극대화시킬 수 있는 priming 최적 처리 조건은 100mM의 $K_3PO_4$ 용액으로 $25^{\circ}C$에서 1일간 처리였다. Priming 처리된 종자는 무처리에 비해 높은 발아율을 보였고, $T_{50}$과 MDG가 단축되어 신속한 발아를 유도하였다. 반면 NaOH나 KOH는 처리농도가 높아지고 처리기간이 길어질수록 발아력이 급격하게 저하되어 priming 화학제로는 적당하지 않았다. Creeping bentgrass 및 Bentgrass에서는 priming 처리에 관계없이 발아율이 10% 미만으로 낮았다. 그러나 200mM의 $KNO_3$ 로 3일간 priming 처리하면 발아율을 6%까지 향상시킬 수 있었으나, 현저한 수준은 아니었다. Kentucky bluegrass와 Tall fescue에서 priming 처리 기간은 1일 처리가 발아율 향상에 가장 좋았고, 처리 기간이 6일로 길어질수록 발아율이 저하되었고 발아 속도는 지연되었다. 또한 priming 화학제의 처리 농도는 100 mM 처리가 발아력 증진에 좋았으나, 200 mM과 300 mM로 처리농도가 높아지면 발아율이 감소하였다.

• 한국환경보건학회지
• /
• 제34권3호
• /
• pp.233-239
• /
• 2008

In order to improve reactor performance of existing sewage treatment plants, the feasibility of enhancing reactor performance by bioaugmentation using EM as bioaugmentation agent and the effects of anoxic: oxic time ratio on reactor performance were investigated. Continuous and intermittent aeration modes were compared under the 6 hr of HRT. Three different types of intermittent aeration modes, that is, 15 min, of anoxic:45 min of oxic, 30 min of anoxic: 30 min of oxic, and 45 min of anoxic: 15 min oxic respectively were chosen as test modes to study the effects of anoxic : oxic time ratios on reactor performance. The optimum anoxic: oxic time ratio was 30 min:30 min when considering simultaneous removal of organic, nitrogen and phosphorus. When applying EM into a continuously aerated reactor under the varying dosing rates of 50-200 ppm, reactor performance in terms of organic and nitrogen removal efficiencies was not improved at all. Nitrogen removal efficiency was increase when the EM dosing rate was increased. However the degree of improvement was slight when the EM was injected above 100 ppm. However optimum phosphorus removal was found at the EM dosing of 200 ppm. Thus it was found that optimum injection concentration of EM is 200 ppm. It is apparent that putting EM into a sewage treatment plant significantly affects the T-N removal efficiency of the reactor by enhancing denitrification efficiency especially in operational conditions of relatively long anoxic periods. To achieve reciprocal condition in a reactor with intermittent aeration it is necessary to enhance the reactor performance by EM injection. In the case of modifying existing continuously aerated reactors into intermittent aerated reactors, it is obvious that operating costs of aeration would be reduced by reducing aeration time when compared with existing conventional sewage treatment plants.