• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1034-1037
• /
• 2002

This paper presents an optimum design of rotor-bearing system using a hybrid method to compute the solutions of optimization problem. The present hybrid algorithm namely Enhanced Artificial Life Algorithm(EALA), is a synthesis of an artificial life algorithm(ALA) and the random tabu search(R-tabu) method. We applied EALA to the optimum design of rotor-shaft system supported by the floating ring journal bearings. we will propose the optimum shape of rotor, position and shape of bearings. Through this study, we investigate the reliability and usefulness of EALA.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.82-85
• /
• 2006

측면 기울기가 변하는 사다리꼴 핀이 일차원 해석적 방법에 의하여 최적으로 설계된다. 각기 다른 네 경우의 대류특성계수에 대하여 핀 끝 길이를 따른 열손실의 변화경향이 보여 진다. 최적의 열손실은 다소 임의적으로 최대열손실의 92%로 선택된다. 이러한 최적의 열손실이 발생할 때의 최적의 핀 길이 대 대류특성계수의 변화가 나타내진다. 최적의 유용성과 특정한 경우의 유용성이 핀 형상 계수의 함수로 보여 진다.

• 한국항해항만학회지
• /
• 제27권3호
• /
• pp.267-272
• /
• 2003

This paper describes design method of Passive-type Radar Reflector (PRR) which is to provide the requirement of newly revised 2000 SOLAS regulations on the Radar Reflector. The main target of this work is to find the optimum shape of a radar target having large Radar Cross Section (RCS). Through the RCS analysis based on the theoretical approach, two kinds of PRR models, RRR-F model for use in fisheries and PRR-S model for use in small sized ship, are designed and discussed their RCS performance. RCS measurement tests for the various sized samples are carried out in an anechoic chamber. As evaluation results it was clearly shown that the conventional sphere-type shows optimum shape in case of PRR-S, while the cylinder-type which consists of large sized corner clusters or zig-zag flat plats gives best performance in case of PRR-F.

• 연구논문집
• /
• 통권29호
• /
• pp.185-194
• /
• 1999

The shape and thickness distribution according to the pressure-time curve were carried out using the FEM and experiment. Also, mechanical properties were investigated. The square cup parts have been formed with pressure-time curve generated by result of analysis. The tensile strength and elongation have been investigated according to applied pressure conditions using the tensile test specimen obtained from the superplastic formed cup. We can use to predict the shape of formed part under the applied pressure using the FEM analysis. In the case of optimum pressure condition, the thickness distribution and mechanical properties were improved. From this study, we can find the important of optimum pressure-time condition. We have investigated about the forming of airplane part and fuel tank for motorcycle. If the applied load used in boundary conditions was appropriate, the simulation result coincides with the formed part. However, it is very difficult to define the pressure condition in complicated shape. Thus, it is need to develop the optimum pressure condition for superplastic forming.

• International Journal of Automotive Technology
• /
• 제8권5호
• /
• pp.599-603
• /
• 2007

An efficient optimum design process has been developed and applied to systematically design a lock-up clutch system for a torque converter used in an automatic transmission. A simulated annealing algorithm was applied to determine the parameters of the compressive helical damper springs in the clutch. The determination of the number, location, a number of turns, and deflection of damper springs plays an important role in reducing vibration and noise in the lock-up system. Next, FE-based shape optimization was coded to find the shape of the clutch disk that would satisfy the strength, noise and vibration requirements. Using the optimum code, parametric studies were performed to see how spring diameters and frequencies of clutch systems changed as the damper spring traveling angles and the torques were varied. Based on the optimum results, five different designs for clutches with different springs were fabricated and vibration analyses and tests were conducted to validate the accuracy of the proposed method. Results from the two methods show a good correlation.

• 대한토목학회논문집
• /
• 제4권4호
• /
• pp.127-135
• /
• 1984

본 연구는 실제 하중을 받는 강재 아치구조의 최적형상을 다루었다. 목적함수로는 아치의 중량을 취했으며, 제약조건으로는 단면력, 체적, 아치리브의 길이, 아치부채 단연적의 조합으로 구성된 웅력제약초건을 고려하였다. 형상최적화문제는 아치부재의 단면척이 설계변수의 항으로 형성되었으며, 첫단계로 구조해석의 정밀도가 최적 설계의 목적함수값에 미치는 영향을 분석하였다. 형상최적화 알고리즘은 Two-space System 으로 형성되었고, Space 1 에서는 Modified Newton-Raphson Method에 의한 단면최적화, Space 2 에서는 Powell Method 에 의한 형상최적화를 시도하여 형상최적화 알고리즘을 도출하였다. 본 연구에서 도출된 최적화 알고리즘을 이용하여 아치의 단면최적화와 최적 아치형상에 관한 연구가 수행되었다. 이 알고리즘에 의해 실제 조건하에서 아치의 최적 Span-Rise 비를 구할 수 있다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.63-69
• /
• 2011

Exhaust gases of a vessel from a main engine, a diesel generator and an incinerator contain very harmful substances like soot, $SO_2$ and NOx. Careful design of funnel shape is required to prevent those harmful exhaust gases from influencing on accommodation and a fan room. Meanwhile, the exhaust gases are also hot enough to damage electronic devices like radar. Therefore the funnel design should be considered so that electronic devices are not directly exposed to the exhaust gas in the strong stern wind. This study may propose guidelines of optimum design criterion for the anti-thermal damage design of the electronic devices and anti-recirculating design of harmful exhaust gas near the accommodation. From CFD analyses, we can understand that the major factors affecting the exhaust gas dispersion are the large scale mixing by separation vortices and the sluggish flow in the recirculation region. We hope that the funnel flow analysis around ship's funnel is used for practical optimum funnel design to minimize the exhaust gas dispersion by adjusting the funnel shape, the position of the exhaust pipe, the shape of bulwark, the exhaust direction of air ventilated an engine room and the angle of the exhaust pipe.

• 한국산업융합학회 논문집
• /
• 제13권3호
• /
• pp.161-168
• /
• 2010

Recently, bridges have been momenttous as not only regarding function but also concerning aesthetics. However, when beauty is considered in the bridge, it is also essential that stability and economics be considered. Besides, when considering stability, an arch bridge is one of the most stable structures. The most important element is a rise ratio when regarding beauty and economics of arch bridges. The effect of dead load and DB24 load have been considered to decide proper rise ratio. Therefore, in this study, examined the value of moment, displacement and member forces, in the variation of the rise ratio of arch bridges. The most optimum shape of Nielsen arch bridges has determined by analyzing member forces, moments and displacement with parameters of rise ratio and angle of vertical members. By comparison between values, the hanger types have been also considered to derive the optimum shape of Nielsen arch bridge.

• 소성∙가공
• /
• 제8권1호
• /
• pp.38-46
• /
• 1999

This paper deals with the shape fixability of press formed parts through the use of a V-bending process and a U-bending one. The influence of material properties on the shape fixability in forming processes was investigated. A V-bending process had on optimum ben radius for each combination of parameters which caused maximum shape fixability. In the U-bending process the blank holder force could control the degree of shape fixability. A ha호 blank holding force resulted in a uniform strain distribution and increased shape fixability.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.109-116
• /
• 2002

Resently, reduction of industrial products in size and weight has increased by the application of micro-drill for gadgets of high precision and gave rise to a great interest in a micro-drilling. Due to the lack of tool stiffness and the chip packing, micro-drilling requires not only the robust tool structure which has not affected by the vibration, but also the effective drilling methods designed to prevent tool fracture from cutting troubles. Firstly, this paper presents a new manufacturing process of micro-drill for improving the product rate and an optimum shape of micro-drill for lengthening the tool life, and secondly suggests between tool life and drilling torque acquired in the inprocess monitoring system.