• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.41-45
• /
• 2015

In this study reviewed the validity of the estimated optimum trim by the numerical analysis. For this purpose, the numerical analysis of the trim optimization for 6500TEU container carrier and capesize bulk carrier were carried out using Star-CCM+, which results were compared with the results of model tests. The reliability of results of the numerical analysis was confirmed via comparing the resistance determined by the numerical analysis and model test. The performance of self-propulsion at each trim conditions were estimated using the calculated resistance by numerical analysis. The BHP at each trim condition were calculated by estimated performance of self-propulsion, which trend of results were confirmed similar trend of result of model test.

• 대한조선학회지
• /
• 제25권1호
• /
• pp.3-10
• /
• 1988

This paper presents some experimental investigations on the effectiveness of the Stern-End-Bulb(SEB) and the design procedure of the optimum one. Experimental method was discussed to search the optimum SEB and the resistance reduction rate was investigated from the resistance test results of the SEB series for a passenger boat and a container ship. The contribution of SEB on the propulsive coefficients was discussed from the self-propulsion test results for a container ship. It would be expected that the power saving rate is about 5.8 percents for a passenger boat and 3.6 percents for a container ship by optimum SEB, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.414-430
• /
• 2013

This paper shows the study of preswirl duct as an effective energy saving devices that have been devised and reviewed to support the propeller performance, especially for the ship of VLCC with large block coefficients. From the bare hull wake measurements, typical upper/lower asymmetry of hull wake at the propeller disk was found. The 2 kinds of pre-swirl duct, Unconventional half circular duct and Conventional circular pre-swirl duct have been designed and reviewed to recover the loss of propeller running in that condition. The general function of the pre-swirl duct was set to work against this asymmetry of wake and generate pre-swirled flow into the propeller against the propeller rotating direction. The optimum self propulsion tests with various angle configurations were carried out and the best configuration was decided. Accordingly, cavitation test was carried out with best configuration of unconventional half circular duct. The blade surface and tip vortex cavitation behaved smoother when the duct was mounted. The hull pressure amplitudes reflected this difference, so the hull pressure amplitude with duct was smaller than that of without duct.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.109-115
• /
• 2011

The ice tank is important facility to check the performance of the ship and offshore in ice condition before the construction. MOERI(Maritime & Ocean Engineering Research Institute) constructed ice model basin on the end of 2010. The ice technology to know the phenomena of ice near the ship and to estimate power of the ship in model scale is the main characteristic of the ice model basin. To achieve this goal in one ice sheet, making of test plan and feasibility check of test possibility have to review in the beginning stage of the every test. This paper describes the number of maximum resistance and self propulsion test in a sheet of level ice and proposes the methodology to optimize pack ice, rubble ice, brash ice and ice ridge test in MOERI ice tank. The feasibility of free running test to know maneuvering performance in ice field and some specific idea to measuring ice thickness and ice ridge shape was proposed.