• 대한원격탐사학회지
• /
• 제34권1호
• /
• pp.151-166
• /
• 2018

This paper compares the four selections of performance used in the application of genetic algorithms (GAs) to automatically optimize multispectral pixel cluster for unsupervised classification from KOMPSAT-3 data, since the selection among three main types of operators including crossover and mutation is the driving force to determine the overall operations in the clustering GAs. Experimental results demonstrate that the tournament selection obtains a better performance than the other selections, especially for both the number of generation and the convergence rate. However, it is computationally more expensive than the elitism selection with the slowest convergence rate in the comparison, which has less probability of getting optimum cluster centers than the other selections. Both the ranked-based selection and the proportional roulette wheel selection show similar performance in the average Euclidean distance using the pixel clustering, even the ranked-based is computationally much more expensive than the proportional roulette. With respect to finding global optimum, the tournament selection has higher potential to reach the global optimum prior to the ranked-based selection which spends a lot of computational time in fitness smoothing. The tournament selection-based clustering GA is used to successfully classify the KOMPSAT-3 multispectral data achieving the sufficient the matic accuracy assessment (namely, the achieved Kappa coefficient value of 0.923).

• 환경위생공학
• /
• 제15권2호
• /
• pp.85-94
• /
• 2000

The comparative evaluation is the most effective method for site selection because the selection of waste treatment facility is to determine the optimum site out of limited candidate sites. This study adopted the ordinal scale evaluation, one of methods of comparative evaluation. The ordinal scale evaluation aims to determine the investigating items referring to the character of sites, to determine the importance factors for investigating items, and to determine the optimum site according to the quantitative evaluation. This study has focussed on reflecting the opinion of residents to the maximum extent with a weight on social and economic aspects, considering the state of confrontation against each other between the autonomous government organization and local residents, which is being emerged as a social issue relating to the evaluation rating on each item of site selection of an optimum site. Therefore, rational, and clear validity investigations and proper reduction of both time and expenses in site selection as well through this a study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.488-493
• /
• 2005

Railload line design of the railroad construction project should be planed considering the variety of quantitative and qualitative factors, and needs to be selected the optimum altinative weighing from VE/LCC analysis of the planned design. The purpose of this research is for showing selecting plan of the optimum railload line and railway bridge applying VE/LCC analysis in selecting the optimum altinative of railroad construction based on quantitative and qualitative factors, such as initial construction cost, maintenance cost, owner and user's requirements. In this research showed the application plan by each stage using data analysis, function analysis, and alternative evaluation of VE/LCC analysis with AHP and LCC analysis program for the selection. This research is proved the rationality and application of the course of selecting the optimum alternative through case application

• 응용통계연구
• /
• 제14권2호
• /
• pp.429-437
• /
• 2001

단순 이단계 표본 추출의 경우에 최적 선택률은 Hansen과 Hurwitz(1949)에 의하여 구하여졌다. 그러나 통계청에서 실시하는 표본조사등은 층화 이단계 추출을 한다. 따라서 실제적인 필요성에 의하여 층화 2단계 표본 설계를 시도 하였다. 층화 이단계 표본추출시에 주어진 비용아래서 모총계의 추정량의 분산을 최소로 하는 최적의 선택확률(optimum selection probability), 표본추출율과 부차 표본추출율을 Lagrangean 승수법에 의하여 구한다.

• 한국측량학회지
• /
• 제9권2호
• /
• pp.127-138
• /
• 1991

본 연구는 지형정보시스템을 활용한 최적 노선선정에 관한 연구이다. 일반적으로 노선의 선정은 후보노선대, 최적노선대, 최적노선의 선정 순으로 이루어지는데 본 연구에서는 노선선정계획의 마지막 부분인 최적노선선정부분을 고려하였다. 최적노선의 선정은 연구대상지역을 일정한 크기의 정규형격자로 구분하고, 각 정규형격자에 토지이용현황, 지가, 경상도 등을 고려하여 얻어진 가중치를 적용하였다. 이를 지형 정보시스템의 속성 데이타로 활용하여 노선선정에 적용되는 가중치의 특정부분으로 고려하고, 세개의 노선을 선정하였다. 이들 세개의 노선을 비교ㆍ분석하여 실제노선의 선정과정에서 지형정보시스템의 활용 가능성을 제시하고자 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.315-320
• /
• 2003

Selecting a railroad line requires the comparative evaluation of various elements. As a systematic approach to this selection it will be necessary to apply the VE study and the LCC analysis. This study proposes a methodology for selecting the optimum line of the ralroad using VE-LCC analysis. The VE study is performed by following four steps : Information analysis, Function analysis, Alternative evaluation, and Optimum plan selection. The economics evaluation in VE study is using LCC analysis and Sensitivity analysis. Cost items in LCC analysis are classified into bridge, tunnel, rail, and earthwork. We could select the optimum alte-rnatives considering not only cost elements hut also various evaluation element in VE-LCC analysis. The synthetic evaluation process of relative value composition and weighted matrix evaluation

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.161-171
• /
• 1994

Mesh selection analysis for the trawl net were carried out at the Southern Korean Sea and the East China Sea during the 1992-1994 years by the training ship Seabada of the National Fisheries University of Pusan, using A type (51.2mm), B type (70.2mm), C type (77.6mm), D type (88.0mm) square mesh cod-ends. The fishing trials were made using bottom trawl of the trouser type cod-end with cover net. Selection curves and selection parameters were calculated by a logistic model for Sphyraena pinguis, Pampus argenteus, Trachurus japonicus, Pagrus major, Callanthias japonicus, Trichiurus lepturus. The results obtained are summarized as follows: 1. Red barracuda : Selection range and fifty percent selection length in the A type was 115.8mm, 292.8mm, respectively. 2. Harvest fish : Each selection range and fifty percent selection length in the B. C. and D type was 37.7mm, 113.8mm : 40.1mm, 131.7mm and 64.8mm, 148.6mm, respectively. Selection parameters of master curve were : slope, 3.81 : intercept, -6.4. Optimum mesh size was 89.3mm. 3. Horse mackerel : Each selection range and fifty percent selection length in the A, B, C and D type was 43.0mm, 148.3mm : 60.7mm, 183.2mm, 214.5mm and 91.4mm, 254.9mm, respectively. Selection parameters of master curve were : slope 2.30 : intercept, -6.4. Optimum mesh size was 66.8mm. 4. Red seabrem : Selection range and fifty percent selection length in the D type was 42.7mm, 203.4mm, respectively. 5. Yellowsail red bass : Selection range and fifty percent selection length in the A type was 84.0mm, 110.6mm, respectively. 6. Hair tail : Each selection range and fifty percent selection length in the A, B and C type was 59.7mm, 176.0mm : 100.9mm, 250.7mm and 178.6mm, 307.0mm, respectively. Selection parameters of master curve were : slope, 1.54 : intercept, -5.4. Optimum mesh size was 57.5mm.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.118-126
• /
• 2007

Most of materials receive forces in use so that the characteristics of materials must be considered in system design to prevent deformation or destruction. Mechanical properties of materials can be expressed as responsible level of material itself under the exterior operation. Main mechanical properties are strength, hardness, ductility and stiffness. Currently, among major measure facilities to measure the mechanical properties, advanced indentation technique has important use in industrial areas due to nondestructive and easy applications for mechanical tensile properties and evaluation of residual stress of materials. This study is to find the optimum experimental condition about residual stress advanced indentation technique for accurate analysis of the welded joint of steel materials through indentation load-depth curve obtained from cruciform specimen experiment. Optimum selection was applied to the welded joint of real steel materials to find out non-equi-biaxial stress state and the results were compared with general residual stress analyzing method fur verification.

• 수산해양기술연구
• /
• 제30권2호
• /
• pp.86-96
• /
• 1994

In order to estimate the optimum harvesting mesh size of multispecies, the 24 species of catching data which were taken by fishing trial of trawl gear in Korean Southern Coast and East China Sea during 1991-1993 year were grouped and divided by the Cluster analysis method, considering first maturity length and body width, body height, body girth based on the first maturity length. With the same method, the above groups were subdivided by the potential escape such as possible escape index, range factor and selection factor. In case of the species devoid of selection parameters, these species were first subdivided by the use of possible escape index and length range factor. Next, the optimum harvesting mesh size of multispecies was properly classified according to the optimal mesh size of a fish estimated by first maturity length against selection factor. The results obtained are summarized as follows: 1. Each optimum harvesting mesh size of Psenopsis anomala, Priacanthus macra-canthus, Trachurus japonicus, Argyrosomus argentatus was 71.1-79.5mm, and Saurida undosquamis was 65.5mm. 2. Each optimum harvesting mesh size of Scomber japonicus, Pseudosciaena crosea, Pseudosciaena Polyactis, Sebastes thompsoni, Doderleinia berycoides was 78.5-85.6mm, and Bembras japonicus, Sphyraena pinguis was 48.4-51.3mm. 3. Each optimum harvesting mesh size of Zeus faber, Pampus argenteus, Zenopsis nebulosan was 118.4-124.1mm, and Caranx equula was 91.4mm, and Thamnaconus modestus was 131.2mm, and Pagrus major was 149.4mm. 4. Each optimum harvesting mesh size of Upeneus bensasi, Callanthias japonicus, Sardinops melanosticata, Konosirus punctatus was 36.8-42.8mm, and Acropoma japonicum was 21.2mm, and Apogon lineatus was 26.3mm.

• 수산해양기술연구
• /
• 제29권4호
• /
• pp.247-259
• /
• 1993

The fishing experiment was carried out by the training ship Saebada in order to analyse the mesh selectivity for trawl cod-end, in the Southern Korea Sea and the East China Sea from June. 1991 through August, 1992. The trawl cod-end used in this experiment has the trouser type of cod-end with cover net. and the mesh selectivity was examined for the five kinds of the opening of mesh in its cod-end part. A total of 163 hauls, of which having mesh size 51.2mm ; A 89, 70.2mm ; B 54, 77.6mm ; C 55, 88.0mm ; D 52 and 111.3mm ; E 20 were used respectively. Selection curves and selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b)) ). The mesh election master curves were estimated by S=1/(1+exp super(-[a(L/M)+$\beta$]) ). and the optimum mesh size were calculated with (L/M) sub(50) of master curve. In these cases 'a' and '$\alpha$' are slope, 'b' and '$\beta$' are intercept. 'L' is body length of the target species of fishes, 'M' is the mesh size, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and the results obtained are summarized as follows: 1. Red seabream Pagrus major(Temminct et Schlegel) and yellow porgy Dentex tumifrons(Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 97.5%, 91.4%, 76.7% and 57.8% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 2.65 and -28.62, 4.40 and -77.73, 2.31 and -46.99, and their selection factors were 1.39, 2.10, 1.83 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.05 and -5.65 respectively, and (L/M) sub(50) was 1.85. The optimum mesh size of Red seabream was 141mm. 2. Filefish Thamnaconus modestus (Gunther) ; Selection rate in each mesh size of A, B, C, D and E were 99.6%, 98.3%, 91.2%, 80.0% and 48.6% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 5.82 and -55.10, 2.92 and -36.90, 3.91 and -63.09, and their selection factors were 1.35, 1.44, 1.45 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.02 and -4.32 respectively, and (L/M) sub(50) was 1.43. The optimum mesh size was 129mm. 3. Target dory Zeus faber Valenciennes ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 100%, 83.2%, 91.6% and 65.0% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 3.85 and -32.46, 4.19 and -57.38, 2.45 and -40.03, and their selection factors were 1.09, 1.56, 1.47 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 2.64 and -3.53 respectively, and (L/M) sub(50) was 1.34. The optimum mesh size was 127mm. 4. Butterfish Psenopsis anomala (Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.2%, 34.1%, 46.5%, 14.3% and 2.4% respectively. Selection parameters 'a' and 'b' of mesh sizes B, C and D were 5.35 and -71.70, 5.07 and -69.25, 3.31 and -62.06 and their selection factors were 1.91, 1.75, 2.13 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.16 and -6.24 respectively, and (L/M) sub(50) was 1.98. The optimum mesh size was 71mm.