• 한국환경과학회지
• /
• 제10권1호
• /
• pp.59-64
• /
• 2001

The effect of major operating parameters in spray drying sorber(=SDS) for automatic control for the simultaneous removal of acidic and organic gaseous pollutants from solid waste incinerator was performed. The field experiment was carried out in pilot scale test for the quantification of major operating parameters of hydrophilic and the hydrophobic pollutants. The removal efficiencies of $SO_2$and HCI in the 5wt% slurry condition were being increased with the increase of the stoichiometric ration which is the molecular ratio of lime to the pollutant concentration, and with the decrease of inflow flue gas temperature in the pilot SDS reactor. The removal efficiency along the height of spray drying sorber was closely related to the temperature profile, and more than 90% of total removal efficiency was achieved in an absorption region. For the removal of acidic gas the optimum operating condition considering the economics and a stable operation is the 5wt% of slurry concentration, 1.2 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. For the organic gases of benzene and toluene the removal efficiencies were 20-60% which is much lower than that of acidic gas. The best removal efficiency was obtained at 1.5 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. The organic\`s removal efficiency along the height of spray drying sorber was quite different from that of acidic gas, that is, more than 60% of the total removal efficiency for benzene and 90% of the total removal for toluene were achieved in the dried adsorption region, which was formed at the lower or exit part of the reactor.

• 공업화학
• /
• 제10권3호
• /
• pp.467-476
• /
• 1999

공기에 의한 n-butane의 산화로부터 무수마레인산을 합성하는 고정층 촉매 반응기의 거동을 조사하였다. 대류-확산-반응기구로 묘사되는 고정층 촉매반응기의 거동은 Langmuir-Hinshelwood형의 반응속도식 및 비정상상태 이차원 유사균일상 모델을 적용 조사하였다. 예측모델은 Sharma의 pilot-plant 실험 결과인 단일층 반응기의 축방향 온도 및 수율 분포에 대한 최적적합을 통한 최적매개변수 추정에 의해 구성하였다. 또한 예측모델은 단일층 반응기와 통일한 수율 및 전화율을 생성시킬 수 있도록 모사된 불균열활성의 이중층 반응기가 열점에서 $8.96^{\circ}C$ 낮은 온도 상승을 일으켰다. 단일과 이중층 반응기의 가능한 조업조건 (냉매온도, 반응물의 농도, 온도 및 유량)변화에 대한 매개변수 감응도를 조사한 결과 동일한 조업 조건하에서 이중층 반응기가 단일층 반응기에 비해 더 넓은 조업범위는 물론 전화율 및 수율이 다소 높게 나타났다.

• ETRI Journal
• /
• 제32권4호
• /
• pp.548-554
• /
• 2010

The transcutaneous energy transmission system (TETS) composed of a Class-E amplifier may operate at a state away from the optimum power transmission due to the load variation. By introducing the feedback-loop technique, the TETS can keep the optimum state with constant output voltage by adjusting the important design parameters, that is, the duty ratio and frequency of the driving signal and the supply voltage. The relations between these adjusted parameters and the load are investigated. The effectiveness of the feedback technique is validated through a design example with a variable load parameter. The experimental results show that the Class-E amplifier in the feedback loop can keep operating at the optimum state under the condition of up to 50 percent variation of the load value.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.29-34
• /
• 1995

Mirror coating is applied to laser facets to improve properties of edge emitting laser diodes. In this experiment, InGaAsP/GaAs high power laser diodes were studied with respect to different degrees of anti-reflective coating. Sputterred $Al_{2}$O$_{3}$ was used as the coating material and the HR coating was kept constant at 90%. Threshold current density, differential quantum efficiency, emission wavelength and the operating current at 500mW were measured for a range of AR coating and compared with theoretically calculated values; that showed good agreements. Precise wavelength control is important for laser diodes for solid state pumping because of small absorption bandwidth. In addition, since these lasers operate under CW condition, a lowest possible operating current for a given power is desired in order to minimize the heat produced. From the results of this experiment, we were able to obtain a optimum range of AR coatings for minimum operating current. The wavelength can be varied up to 4nm within this range.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.129-138
• /
• 1999

In this paper, our main issue is that establishing the control procedure of continuous gas flow rate according to combustion fan RPM. For this, first, we decide the optimum operating condition of gas swirl burner through analysis of combustion characteristics - thermal efficiency, combustion efficiency and exhaust gases such as CO, $CO_{2}$, $O_{2}$, $NO_{x}$ and THC. Second, fuel gas flow rate of gas valve is decided with considering excess air ratio and combustion fan RPM is decided by the target of combustion air flow rate. Finally, experimental operating equation is acquired by regression for gas valve and combustion fan. This equation is the control equation of continuous gas flow rate and always gas flow rate is decided by combustion fan operating RPM.

• Nuclear Engineering and Technology
• /
• 제21권3호
• /
• pp.216-222
• /
• 1989

원자력병원에 설치되어 있는 MC-50 싸이클로트론은 중성자 치료와 의학용 동위원소 생산을 위해 가동중에 있다. 본 논문에서는 MC-50의 설계 특징, 기계적 구조, 가동 특성에 대하여 기술하고 있다. 본 싸이클로트론의 최적 가동 조건은 반복적인 운전에 의해 결정되었으며, 내부 빔의 성능은 싸이클로트론 반경의 함수로서 내부 빔의 세기 및 공간 분포 측정을 통해 조사되어졌다. 일상적으로, 인출효율이 61%일 때 40$\mu$A세기의 50 MeV 양성자 빔을 얻었다.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.54-60
• /
• 2011

To evaluate the feasibility of electrodialysis for copper removal from industrial wastewater, the effect of operating parameters on the removal of copper was experimentally estimated. The limiting current density (LCD) linearly increased with the copper concentration and the flow rate. The time when the copper concentration of diluate reaches to 3 mg/L was linearly proportional to initial concentration of diluate, and the concentration of concentrate did not affect the removal rate. Increase in the flow rate gave a positive effect on the removal rate and became insignificant at flow rates greater than 2.4 L/min. The removal rate increased with the applied voltage. From the operation of the electrodialysis module used in this research, the flow rate of 2.4 L/min and the voltage corresponding to the 80~90% of LCD were found be the optimum operating condition for the copper removal from highly concentrated copper solutions.

• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.620-624
• /
• 1992

The analytical performance of glow discharge mass spectrometer (GD-MS), using a flat type ion source is discussed. The efficiency of ion extraction was maximized at the distance between anode and cathode of 6 mm. At the operation condition of 4 mA, -1000 volt, and 1 mbar for the source, the optimum voltages for sampler and skimmer were40 volt and -280 volt, respectively. The intensities of Cu, Zn, and Mn were increased as a function of square root of current approximately. Korea standard reference materials (KSRM) were tested for an application study. The detection limits of most elements were obtained in the range of several ppm at the optimized operating condition. The peaks of aluminum and chromium were interfered by those of residual gases. The depth profile of nickel coated copper specimens (3, 5, 10 ${\mu}m$ thickness) were obtained by plotting time versus intensities of Ni and Cr after checking the thickness of nickel coated using a scanning electron microscope (SEM). At this moment, the sputtering rate of 0.2 ${\mu}m/min$ at the optimum operating condition was determined from the slope of the plot of time to the coating thickness. The roughness spectra of specimen's crater after 16 min, discharge were obtained using a Talysuf5m-120 roughness tester as well.

• Korean Chemical Engineering Research
• /
• 제44권6호
• /
• pp.555-562
• /
• 2006

최근 액체크로마토그래피는 의학상이나 천연물질 분리에 많이 사용되고 있다. 특히 혼합물에서 유용성분을 분취하기 위해서는 우선 분석용 크로마토그래피의 조업조건이 결정되어야 한다. 때문에 정확한 수학적 모델링과 시뮬레이션은 크로마토그래피의 발전과 디자인 과정에서 필요한 부분이다. 인하대학교 고 순도분리연구실에서는 크로마토그래피의 최적화를 목적으로 HCI 프로그램을 개발하였다. 이 과정에서 최소한의 실험으로 보다 정확하고 빠른 최적 조업조건을 HCI 프로그램을 이용하여 구할 수 있다. 즉 이론단수를 이용하여 체류인자를 예측하는 세가지 모델식으로부터 용출곡선을 계산할 수 있으며 분리도와 분리시간을 기준으로 최적 이동상의 조건을 계산할 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.403-407
• /
• 2005

Objective of the research is to demonstrate solar thermal space and ground heating system which is integrated to a greenhouse culture facility for reducing heating cost, increasing the value of product by environment control, and developing advanced culture technology by deploying solar thermal system. Field test for the demonstration was carried out in horticulture complex in Jeju Island. Medium scale solar hot water system was installed in a ground heating culture facility. Reliability and economic aspect of the system which was operated complementary with thermal storage and solar hot water generation were analyzed by investigating collector efficiency, operation performance, and control features. Short term day test on element performance and Long term test of the whole system were carried out. Optimum operating condition and its characteristics were closely investigated by changing the control condition based on the temperature difference which is the most important operating parameter. For establishing more reliable and optimal design data regarding system scale and operation condition, continuous operation and monitoring on the system need to be further carried out. However, it is expected that, in high-insolation areas where large-scale ground storage is adaptable, solar system demonstrated in the research could be economically competitive and promisingly disseminate over various application areas.