• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1311-1317
• /
• 2001

To investigate only the effects of the stratified mixture distribution on initial flame propagation and combustion characteristics, the instantaneous equivalence ratio in the spark plug gap and combustion pressure were measured simultaneously In a constant volume chamber, To induce the stratified propane-air mixture distribution near the spark plug, counter-flow typed mixture injection system was used under the constant mean equivalence ratio $\Phi$$\_$mean/= 1.0 The instantaneous equivalence ratio was measured by a single-shot Raman scattering with narrow-band KrF excimer laser. The measuring error was within the limit of $\pm$ 3.5% provided that the proposed method was applied to the measured Raman signals. Judging from mass fraction burned derived from the measured pressure, the optimum combustion characteristics were shown under the condition that the local equivalence ratio in the spark plug was near 1.28$\pm$0.04, and these characteristics were more remarkable at the initial stage of combustion.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.1083-1094
• /
• 2003

This study represents an assessment of the phase-Doppler technique to the measurements of dense droplet laden jet. High-pressure injection fuel sprays have been investigated to evaluate the use of the Phase-Doppler anemometry (PDA) technique. The critical issue is the stability of the phase-Doppler anemometry technique for dense droplet laden jet such as Diesel fuel spray in order to insure the results from the drop size and velocity measurements are repeatable, consistent, and physically realistic because the validation rate of experimental data is very low due to the thick optical density. The effect of shift frequency is minor, however, the photomultiplier tube (PMT) voltage setting is very sensitive to the data acquisition and noise in dense droplet laden jet. The optimum PMT voltage and shift frequency should be chosen so that the data such as volume flux and drop diameter do not change rapidly.

• YAKHAK HOEJI
• /
• v.35 no.4
• /
• pp.288-294
• /
• 1991

A new fluorescent derivatizing reagent was developed to be used in HPLC for the trace determination of primary and secondary amines. This new reagent, 1-(N,N-dimethylamino)pyrene-6-sulfonyl chloride, was synthesized by the chlorination of sodium 1-(N,N-dimethylamino)pyrene-6-sulfonate which was obtained from 1-(N,N-dimethylamino)pyrene after sulfonation. Ephedrine and norephedrine were derivatized quantitatively by this reagent. The optimum conditions for the derivatization such as pH, reagent concentration, reaction time and reaction temperature ware examined. The structures of derivatives were identified by IR, $^{1}$H-NMR and MS methods. The fluorescence properties and the stability of the derivatives were examined. The derivatives were separated on silica column with an isocratic elution using the mixture of n-hexane and ethylacetate and monitored by fluorescene detector. Linear calibration curves were obtained and detection limits in a 10 $\mu$l injection volume were 5 picomole for ephedrine and norephedrine.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.269-274
• /
• 2007

A prior fundamental study was executed using a constant volume chamber (CVC) to improve the burning characteristics of lean pre-mixture by the injection of active radicals generated in the sub-chamber of the CVC. The Radical ignition (RI) technique shows remarkable progress in the burning velocity and combustible lean limit compared with the results of the spark ignition (SI) technique. The optimum design value of the sub-chamber geometry is near $0.11cm^{-1}$ for the ratio of the total area of the holes to the sub-chamber volume $(A_h/V_s)$. In this study, based on the former experimental results, the additional works have been performed to examine the effects of the geometry change in the number $(N_h)$, the total section area $(A_h)$, and diameter $(D_h)$ of the passage holes on the combustion characteristics in the CVC. Also ambient conditions such as the initial temperature and the initial pressure of the mixture were selected as experimental parameters and the effects of residual gas at the chamber on the combustion characteristics were investigated. As a result, the correlation between the passage hole number and overall passage hole area was grasped. The effects of the initial temperature were significant, but on the other hand, those of the initial pressure were weak. A more detailed analysis on the residual gas is required in the future.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.422-428
• /
• 2000

Optimum analytical conditions of the aluminium ion were established by flow injection analysis. Eriochrome Cyanine R(ECR) dye reacts with the aluminium ion at pH 6.0 to form a complex that exhibits maximum absorption at 535 nm. Reaction conditions including the mixing and the reaction coil length, the concentration and the pH of the buffer solutio, temperature, and injection loop volume were optimized to intro-duce this reaction into flow injection analysis. The results were as follows. A mixing coil length of 0.5 m and a reaction coil length of 4.0 m, the pH 6.0 and 1M of acetate buffer solution, the ECR concentration of 0.56 mM, the reaction temperature of 40$^{\circ}C$, the injection loop volume of 300${\mu}L$ were chosen as optimum conditions. Under these conditions the detection limit of the aluminiumion was less than 0.05 mg/L and the repeatability was better than 1%. A sampling frequency of 24 times for an hour was achieved. Interfering ions such as $F^-$, HP$O_4^{2-}$, $Fe^{2+}$, $Fe^{3+}$, $Mn^{2+}$, and other anions were tested, interference did not occur up to 1,000mg/L of ion concentration and up to 2,CO0mg/L of sulfate ion con-centration. This method was applied for the determination of aluminium ion in tap water and ground water of Jeonju and the Gochang area. The results showed that the aluminium residual in tap water of the Jeonju area was at a mean of 0.478mg/L and that in tap water of the Gochang area was at a mean of 0.278mg/L. Aluminium ion residual of the tap waters in the Jeonju area was higher level than that in the Gochang area. Aluminium residual in the ground water of the Jeonju area was 0.386 mg/L and was lower compared to 0.564 mg/L for the Gochang area.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.3
• /
• pp.153-160
• /
• 2009

Vertical electrokintic-flushing remediation equipment was developed for the remediation of a radioactive soil near nuclear facilities. An optimum reagent was selected to decontaminate the radioactive soil near nuclear facilities with the developed vertical electrokintic-flushing remediation equipment, and the optimum remediation conditions were established to obtain a higher remediation efficiency. Namely, acetic acid was selected as an optimum reagent due to its higher remediation efficiency. When the electrokinetic remediation and the electrokinetic-flushing remediation results were compared, the removal efficiency of 4.6% and the soil waste solution volume of 1.5 times were increased in the electrokinetic remediation. When the potential gradient within an electrokinetic soil cell was increased by two times (4.0 V/cm), the removal efficiencies of $Co^{2+}$ and $Cs^+$ were increased by about 4.3%($Co^{2+}$ : 98.9%, $Cs^+$ : 96.7%). Also, when the reagent concentration was increased from 0.01M to 0.05M, the removal efficiency of $Co^{2+}$ was increased but that of $Cs^+$ was decreased. Therefore, the optimum remediation conditions were that the acetic concentration was $0.01M{\sim}0.05M$, the potential gredient was 4 V/cm, the injection of reagent 2.4ml/g, and the remediation period was 20days.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.5
• /
• pp.1-8
• /
• 2009

Photobioreactor (PBR) that houses and cultivates microalgae providing a suitable environment for its growth, such as light, nutrients, CO2, heat, etc. is now getting more popular in the last decade. Among the many types of PBRs, the bubble column type is very attractive because of its simple construction and easy operation. However, despite the availability of these PBRs, only a few of them can be practically used for mass production. Many limitations still holdback their use especially during their scale-up. To enlarge the culture volume and productivity while supplying optimum environmental conditions, various PBR structures and process control are needed to be investigated. In this study, computational fluid dynamics (CFD) was economically used to design a bubble-column type PBR taking the place of field experiments. CFD is a promising technique which can simulate the growth and production of microalgae in the PBR. To study bubble column PBR with CFD, the most important factor is the possibility of realizing bubble. In this study, multi-phase models which are generally used to realize bubbles were compared by theoretical approaches and comparing in a 2D simulation. As a result, the VOF (volume of fluid) model was found to be the most effective model to realize the bubbles shape as well as the flow inside PBR which may be induced by bubble injection. Considering the accuracy and economical efficiency, 0.005 second time step size was chosen for 2.5 mm mesh size. These results will be used as criteria for scale-up in the PBR simulation.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.286-291
• /
• 1997

Taxol which is recognized as a powerful anticancer reagent was extracted from yew extract and separated by NP-HPLC (Normal-PhaseHigh Performance Liquid Chromatography). The experiments were performed in the isocratic mode with $5{\mu}l$ to $100{\mu}l$ injection volume and 1ml/min mobile phase flow rate. The major mobile phase was hexane and small amounts of ethanol, methanol, 1-propanol and isopropanol were added to change the retention behavior. Prior to a real sample, the artificial mixture of taxol, cephalomannine and 10-deacetyltaxol was tested. They are hard to be separated because of similar chemical structures. The experimental results showed that the proper composition of mobile phase for separating the three components was found 96% hexane and 4% ethanol(vol.%) or 96% hexane, 2% 1-propanol and 2% methanol(vol.%). Compared to the run time of 80 minutes for the binary system, the mixture was separated within 50 minutes with the less amount of mobile phase for the ternary system. Finally, $1{\mu}g$ of taxol was separated from yew tree extracts under the optimum operating conditions.

• Corrosion Science and Technology
• /
• v.9 no.5
• /
• pp.187-195
• /
• 2010

Hyper duplex stainless steels have been developed in Korea for the purpose of application to the seawater system of Korean nuclear power plants. This system supplies seawater to cooling water heat exchanger tubes, related pipes and chlorine injection system. In normal operation, seawater is supplied to heat exchanger through the exit of circulating water pump headers, and the heat exchanged sea water is extracted to the discharge pipes in circulating water system connected to the circulating water discharge lines. The high flow velocity of some part of seawater system in nuclear power plants accelerates damages of components. Therefore, high strength and high corrosion resistant steels need to be applied for this environment. Hyper duplex stainless steel (27Cr-7.0Ni-2.5Mo-3.2W-0.35N) has been newly developed in Korea and is being improved for applying to nuclear power plants. In this study, the physical & mechanical properties and corrosion resistance of newly developed materials are quantitatively evaluated in comparative to commercial stainless steels in other countries. The properties of weld & HAZ (heat affected zone) are analyzed and the best compositions are suggested. The optimum conditions in welding process are derived for ensuring the volume fraction of ferrite(${\alpha}$) and austenite(${\gamma}$) in HAZ and controlling weld cracks. For applying these materials to the seawater heat exchanger, CCT and CPT in weldments are measured. As a result of all experiments, it was found that the newly developed hyper duplex stainless steel WREMBA has higher corrosion resistance and mechanical properties than those of super austenitic stainless steels including welded area. It is expected to be a promising material for seawater systems of Korean nuclear power plants.

• Journal of Sericultural and Entomological Science
• /
• v.14 no.2
• /
• pp.81-92
• /
• 1972

Studies on Pathogenicity of Nosema bombycis Naegeli are summarized as follows: 1. The mortality of the parents, Jam 103 and Jam 104, is remarkbly higher than that of the hybrid, Jam 103$\times$Jam 104, whereas there is no difference in the mortality between the parents. 3. In the mortality of the pathogen-concentration, it is increased in order of the following concentrations inoculated, 10$^{8}$ , 10$^{7}$ , 10$^{8}$ and 10$^{5}$ /ml. 3. In the mortality of each instar, it is high in order of 5th, 4th, 3rd, and 2nd instar. 4. In the interaction between the mortalities of the varieties and the concentrations, 1) The mortality shows no differences between the parents and the hybrid in the high concentration of 10$^{8}$ /ml. 2) The mortality of the hybrid is lower than that of the parents in the low concentration of 10$^{5}$ /ml, whereas no difference is found between the parents. 3) The interaction appears at the same level in the middle concentration of 10$^{6}$ /ml to the parents and of 10$^{7}$ /ml to the hybrid. 5. It was pointed out that active immunity depends upon the volume of antigen injection, immunizing period, and injection intervals. In this experiment, it is noticed that the optimum volume of injection is above 20ml and D is the best one of the four treatment (A.B.C.D.). 6. The immune sera indicate such a 12,800 high titer in the indirect method can be obtained from the D immunizing method. Silkworm tissues and N. bombycis spores show self-fluorescence, but it is able to distinguish it from the F.I.T.C. by using the U.V. filter. 7. The midgut epithelium is examined to be the first site of the tissues which are penetrated into and multiplied by the inoculation of the pathogen per os.