• 한국수산과학회지
• /
• 제52권5호
• /
• pp.511-518
• /
• 2019

Evaluating the habitat suitability of potential aquaculture sites for cultured species is critical to the sustainable use of tidal flats. This study evaluated the habitat suitability index (HSI) of 12 sites in a tidal flat aquaculture farm at Geunso Bay, Taean, in June 2016. The parameters used to model the suitability index were Growth (water temperature, chlorophyll ${\alpha}$, hydrodynamics), Survival (sediment-sand, mean size, air exposure), and Environment (DO, salinity). The HSI was calculated using weighted and No weighted geometric means. The results showed high habitat suitability at the bay's entrance (HIS; No weighted, 0.60-0.70; weighted, 0.60). Hydrodynamics, air exposure, sediment-sand and mean size are thought to have a significant impact on habitat selection by Manila clams Ruditapes philippinarum. This study explored the optimum habitat for Manila clams by calculating the HSI, providing basic data for tidal flat management.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.179-189
• /
• 2008

본 연구는 능동텐던을 이용 지진을 받는 구조물의 최적 능동제어 방법에 관한 수치해법 적용 및 프로그램 개발에 목적이 있다. 능동텐던 시스템에 의한 제어이론을 적용하기 위해서 Ricatti 폐회로 알고리즘을 이용하였으며, 시간지연 문제를 고려하였다. 최적제어의 정식화를 위해서 SUMT기법의 최적화에 의해 성능지수를 최소로 하는 최적 가중치행렬을 추정토록 하였다. 구조물에서의 능동텐던의 최적 위치 선정을 위해서 가제어지수에 의한 방법을 소개하였다. 수치 예를 통해, 제어기의 최적 위치선정을 고려한 능동최적제어가 지진하중을 받는 구조물의 성능제어에 우수한 효과를 나타내는 것으로 평가되었다.

• 한국통신학회논문지
• /
• 제14권5호
• /
• pp.571-577
• /
• 1989

본 논문에서는 최저 손실 파장인 1.55cmum에서 단일모드 광섬유 특성을 연구하기 위하여 사다리꼴 분포를 일반화 시킨 이중굴적율 분포 [a승분포(a=2-$\infty$)+삼각형분포]를 제안하고 색분산 특성[색분산을 영(zero)으로 하는 최적 코어반경, 상대 굴적율차의 최소치, 파장에 대한 색분산의 변화율]을 구하였다. 그리고 파장 1.55um에서 계단형 분포보다 큰 코어 직경을 갖는 삼각형 분포와 특성을 비교해서 좋은 특성을 얻을 수 있었고, a의 값을 2-$\infty$범위로 변화시키면서 특성을 구한 결과 a의 값이 2 이상에서도 거의 같은 특성을 얻었다. 그러므로 사다리꼴 분포의 계단형 부분이 a승 분포(a=2-$\infty$) 형태로 제조되어도 같은 특성을 가지는 이론적 연구결과를 얻었다. 또한 본 논문에서 제안한 굴절율 분포는 a의 값에 따라서 여러 굴절율 분포를 나타내므로, 다중 크래딩 광섬유, Segmentaed Core Fiber 등에 이 굴절율 분포를 적용하여 여러 특성을 연구할 수 있다.

• 한국항공우주학회지
• /
• 제41권4호
• /
• pp.275-283
• /
• 2013

본 논문에서는 유전자 알고리즘을 이용한 복합재 로터 블레이드 단면 구조 최적설계방법에 대한 연구를 수행하였다. 반복적인 최적설계 계산을 위해 자동격자생성 프로그램을 개발하였으며, VABS를 이용해 로터 블레이드 단면에 대한 응력해석을 수행하였다. 로터 블레이드 최소질량을 목적함수로 정의하였으며, 응력 파손지수와 단면 질량중심 그리고 단위 길이 당 블레이드 최소질량을 구속조건으로 설정하였다. 최종적으로 본 논문의 복합재 로터 블레이드 단면 구조 최적설계방법을 통해서 스킨 적층각 및 스킨 두께 그리고 토션박스 두께, 토션박스 위치, 토션박스 폭과 같은 블레이드 단면 설계변수들이 결정되었다.

• 한국지반신소재학회논문집
• /
• 제12권1호
• /
• pp.21-28
• /
• 2013

본 연구에서는 점성토 지반의 지반공학적 특성의 개량을 목적으로 ${\bigcirc}{\bigcirc}$지역에서 채집한 점성토와 이에 대한 대표적 점토광물인 Kaolinite 및 Na-Bentonite에 대하여 최적 생석회 첨가량 결정법(ASTM C 977-22) 방법에 의거하여 각 시료에 대하여 생석회 첨가량을 결정하였다. 이에 대한 지반공학적 특성인 아터버그한계, 일축압축강도의 변화에 대하여 분석하였으며, 시간경과에 따른 Ca 이온 변화 및 점토입자의 미세결정구조 변화를 관찰, 분석하였다. 본 실험 결과 점성토 지반의 지반공학적 특성 개선을 위하여 첨가되는 생석회 첨가량은 최적 생석회 첨가량 결정법에 의해 효과적으로 결정할 수 있고, 시간에 따른 $Ca^{2+}$ 이온 변화 측정치는 점성토 지반의 지반공학적 개선효과 추정에 활용 가능함을 확인하였다.

• Korean Journal of Acupuncture
• /
• 제27권2호
• /
• pp.107-120
• /
• 2010

Objectives : The aim of this study is to measure pulse waveforms by applying 5-level graded pressure, and selecting optimum pulse waveforms. Also to proposing the possibility of using AW(Area of the 1/3 upper height of h1) rate in respect to AT(Total Area) for risk assessment of hypertension or arteriosclerosis is another aim of the study. Methods : Pulse waveforms of normotensive were measured by 5-level graded pressure. The pulse waveforms well reflecting properties of blood vessel(having the largest h1) were selected for optimum pulse waveforms. Various parameters(h-parameter, t-parameter, and others) of optimum pulse waveforms were analyzed. AIx(Augmentation index) was calculated by height-parameters to assess arterial stiffness. The area rate of the 1/3 upper height for h1 in respect to total area was analyzed according to aging. Results : According to aging 1. in height-parameter, h2 and h3 were increased but h5 was decreased. 2. In time-parameter, t2, t3, and t5 were getting short. 3. Area of systolic period was increased, and that of diastolic period decreased. 4. AIx rose by aging. 5. AW was significantly increased despite no changes in AT. Conclusions : By analyzing optimum pulse waveforms of 5-level graded pressure method, we could complement weakness of single graded pressure method. Also, possibility of applying the AW rate to risk assessment of hypertension or arteriosclerosis was confirmed in normotensive population which might not be assessed by AIx.

• 한국농공학회논문집
• /
• 제62권6호
• /
• pp.51-62
• /
• 2020

The objective of this study was to estimate an optimum ecological flow rate in the Banbyeon stream based on the two representative fish species. Hydraulic stream environment was simulated with HEC-RAS for two water flow regimes and used for the PHABSIM hydraulic simulation. A dominant species of Zacco platypus and an endemic species of Squalidus chankaensis tsuchigae were selected as the representative fishes whose habitat conditions were evaluated for the spawning and adult stages. Weighted usable area (WUA) was estimated based on habitat suitability index (HSI) and PHABSIM habitat simulation. Overall deep water zone in the stream demonstrated greater WUA which implies better habitat status. The estimated WUA for Zacco platypus as the dominant species was about five times greater than Squalidus chankaensis tsuchigae at the stream flow of 12 ㎥/s. The optimum ecological flow rates were 15 ㎥/s and 25 ㎥/s for the respective spawning and adult stages of Zacco platypus, while 5 ㎥/s was estimated for both the life cycles of Squalidus chankaensis tsuchigae. Assuming that the dominant species may survive better in wider flow regimes, the optimum ecological flow rate should be determined rater based on the endemic species and flow rate of 5 ㎥/s was suggested for the Banbyeon stream.

• Structural Engineering and Mechanics
• /
• 제46권1호
• /
• pp.19-37
• /
• 2013

The optimum design of base isolation system considering model parameter uncertainty is usually performed by using the unconditional response of structure obtained by the total probability theory, as the performance index. Though, the probabilistic approach is powerful, it cannot be applied when the maximum possible ranges of variations are known and can be only modelled as uncertain but bounded type. In such cases, the interval analysis method is a viable alternative. The present study focuses on the bounded optimization of base isolation system to mitigate the seismic vibration effect of structures characterized by bounded type system parameters. With this intention in view, the conditional stochastic response quantities are obtained in random vibration framework using the state space formulation. Subsequently, with the aid of matrix perturbation theory using first order Taylor series expansion of dynamic response function and its interval extension, the vibration control problem is transformed to appropriate deterministic optimization problems correspond to a lower bound and upper bound optimum solutions. A lead rubber bearing isolating a multi-storeyed building frame is considered for numerical study to elucidate the proposed bounded optimization procedure and the optimum performance of the isolation system.

• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.159-163
• /
• 2014

More accurate CD (Critical Dimension) control is required for the nanometer-scaled devices. However, since the reflectivity between substrate and PR (Photoresist) becomes higher, the CD (Critical Dimension) swing curve was intensified. The higher reflectivity also causes PR notching due to the pattern of sub-layer. For this device requirement, it was optimized for the thickness, refractive index(n) and absorption coefficient(k) in the bottom anti-reflective coating(BARC; SiON) and photoresist with the minimum reflectivity. The computational simulated conditions, which were determined with the thickness of 33 nm, n of 1.89 and k of 0.369 as the optimum condition, were successfully applied to the experiments with no standing wave for the 0.13um-device. At this condition, the lowest reflectivity was 0.44%. This optimum condition for BARC SiON film was applied to the process for 0.13um-device. The optimum SiON film as BARC to PR and sub-layer could be formed with the accurate CD control and no standing waver for the nanometer-scaled semiconductor manufacturing process.

• 한국가시화정보학회지
• /
• 제8권4호
• /
• pp.13-18
• /
• 2010

This paper presents an experimental study on the performance of a micro-mixer using AC electro-osmotic flow. The microchannel is made of PDMS for the side and top walls and glass patterned with ITO for the bottom wall. We first investigated the effect of the applied potential as well as the frequency on the slip velocity. We have found that the slip velocity is roughly proportional to the applied voltage in line with the Helmholtz-Smoluchowski equation and there is an optimum frequency at which the slip velocity becomes maximized. To find the optimum parameters for mixing device we tested our device for various design parameters. It turned out that the best mixing effect is obtained approximately when the electrode angle is $30^{\circ}$, electrode width $200\;{\mu}m$, and the frequency of power supply 700 Hz.