• Journal of Microbiology and Biotechnology
• /
• 제10권5호
• /
• pp.632-637
• /
• 2000

This research was undertaken to restore the biological activity of cyclodextrin glucanotransferase (CGTase) of Bacillus macerans origin expressed as inclusion bodies in recombinant Escherichia coli. The optimum concentration of urea used as a denaturant was 8 M. The supplementation of 0.5 M urea into a dialysis buffer increased the refolding efficiency by preventing any protein aggregation. The influence of the protein concentration, temperature, and pH were also investigated. The protein concentration was found to be the most important factor in the refolding efficiency. The optimum temperature was 15-$25^{\circ}C$ and the optimum pH was 6.0. The maximum specific activity of the CGTase refolded under the optimum conditions was 92.2 U/mg, corresponding to 72% of the native CGTase. A comparison of the secondary structure between the native and the refolded CGTase showed that the relative ratio of the $\alpha$-helix content in the native to the refolded CGTase was 1:0.82.

• 한국미생물·생명공학회지
• /
• 제24권6호
• /
• pp.756-762
• /
• 1996

In order to develop the method for mass production of natural food colorant from Monascus anka, optimum cultivation conditions for producing red and yellow pigments by cultiva- ting the mold in a jar fermenter and their color characteristics were investigated. The mold produced red and yellow pigments both intracellularly and extracellularly. These pigments showed unique light absorption characteristics with maximum absorption of 494, 380, 506, and 388 nm for extracellular red pigment (ERP), extracellular yellow pigment (EYP), intracellular red pigment (IRP), and intracellular yellow pigment (IYP), respectively. Optimum conditions for producing red pigments were found to be temperature 30$\circ$C, initial pH 6.0, rice powder 3-5%, peptone 0.05%, magnesium sulfate 0.25%, aeration rate 0.1 vvm. Optimum temperature for producing yellow pigments was around 35$\circ$C which is higher than that of producing red pigments. The initial pH and rice powder concentration for producing yellow pigments were the same as those of producing red pigments. The higher concentration of nitrogen source and inorganic salt, aeration rate, the more the yellow pigments were produced. The optimum agitation speed was 100 - 300 rpm for pigment production.

• Journal of Pharmaceutical Investigation
• /
• 제19권1호
• /
• pp.9-14
• /
• 1989

In order to study the protease from Agaricus bisporus (Lange), the crude protease preparation was separated by fractionation of mushroom extracts with ammonium sulfate. It was found that extracts from Agaricus bisporus (Lange) Sing. contained protease. The optimum pH of the enzyme was 6.0, and the pH range at which the enzyme was stable was 4.0 to 7.0. The optimum temperature at which the enzyme showed the highest proteolytic activity was $50^{\circ}C$, while the enzyme was instantly inactivated at about $60^{\circ}C$. The enzyme activity was inhibited by $Ag^+$, $Hg^{2+}$, $Cu^{2+}$, $Ba^{2+}$, $Fe^{3+}$, $Co^{2+}$, $Ca^{2+}$, $Pb^{2+}$, $Mg^{2+}$ and $Mn^{2+}$. The $K_m$ value was 0.32 mM with Hammarsten casein.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.1-6
• /
• 2008

In recent years, developments in the semiconductor and electronic industries have brought a rapid increase in the use of large size silicon wafer. For further improvement of the ultra precision surface and flatness of Si wafer necessary to high density ULSI, it is known that polishing is very important. However, most of these investigation was experiment less than 300mm diameter. Polishing is one of the important methods in manufacturing of Si wafers and in thinning of completed device wafers. This study reports the machining variables that has major influence on the characteristic of wafer polishing. It was adapted to polishing pressure, machining speed, and the slurry mix ratio, the optimum condition is selected by ultra precision wafer polishing using load cell and infrared temperature sensor. The optimum machining condition is selected a result data that use a pressure and table speed data. By using optimum condition, it achieves a ultra precision mirror like surface.

• 산업기술연구
• /
• 제27권B호
• /
• pp.161-167
• /
• 2007

The objetives of this study are to set up optimum extraction temperature, time and organic solvent for propolis extraction, to investigate chemical properties, and to develop health foods from propolis preparation. In this study, ethanol and ultrasonic extracts method performed to optimum extraction temperature was at 60, $20^{\circ}C$, optimum extraction time was at 12, 4 hours and optimum extraction amount of solvent was at 20, 15 times of propolis weight. When various ethanol solutions were used, whereas flavonoid content was highest in 70, 80% aqueous ethanol, respectively. So the ultrasonic extracts method used gave better results than the ethanol extracts method in this work. Extraction of propolis with etanol and ultrasonic extracts method was performed by using the water and various concentrations of aqueous ethanol as solvent. Sensitivity of propolis samples to Staphylococcus aureus was investigated and the results were shown. Samples of water extract did not inhibit microbial growth, where as 50% aqueous ethanol extract the largest inhibitory zone for Staphylococcus aureus, then decreased inhibition with increasing ethanol concentrations.

• 약학회지
• /
• 제33권2호
• /
• pp.111-117
• /
• 1989

The optimum reaction conditions for the acid consuming capacity of aluminum silicate synthesized from the reaction of sodium silicate solution and potassium aluminum sulfate solution were investigated by Box-Wilson experimental design, and the micromeritic properties were examined by the means of BET $N_2$ adsorption, Hg penetrometer and methylen blue adsorption. The chemical composition of the samples were analyzed by gravitic method. The results were found to be as follows: optimum reaction temperature $54.7^{\circ}C$, both concentrations of reactant soln 15.7%, reactants molar ratio (Al/Si) 0.5 and drying temperature $65.0^{\circ}C$. The acid consuming capacity of the sample prepared by above optimum conditions was 68 ml and the chemical composition was $Al_2O_3{\cdot}3.6SiO_2{\cdot}3H_2O$. The relationship between acid consuming capacity and micromeritic properties could not found in the range of experiments. Therefore, it is assumed that the acid consuming mechanism of aluminum silicate depends on the neutralization of $Al_2O_3$ and buffer action of $SiO_2$ in sample.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.637-643
• /
• 2002

The objective of this study is to provide a simple methodology to find optimum processing conditions to fabricate sub-micron structured DVD-RAM substrates with superb optical and geometrical properties. It was fecund that the birefringence, which is regarded as one of the most important optical properties for an optical disk, was very sensitive to the mold wall temperature history. Also, the integrity of the replication, represented by the land-groove structure and the radial tilt were influenced by the mold temperature and the compression pressure. A set of optimum conditions were obtained by applying Design of Experiment and the objective functions composed of three different objectives.

• Journal of Dairy Science and Biotechnology
• /
• 제41권2호
• /
• pp.45-56
• /
• 2023

This review serves two purposes: first, to promote the use of improved optimization techniques in response surface methodology (RSM); and second, to enhance the optimum conditions for the fermentation of probiotics. According to research in dairy science, Lactiplantibacillus plantarum K79 is a candidate probiotic that has beneficial health effects, such as lowering blood pressure. The optimum conditions for L. plantarumK79 to produce peptides with angiotensin-converting enzyme (ACE) inhibitory activity were proposed, through modeling each of ACE inhibitory activity and pH as a function of the four factors that are skim milk concentration (%), incubation temperature (℃), incubation time (hours), and starter added amount (%). To estimate optimum conditions, the researchers employed a desirability-based multi-response optimization approach, utilizing third-order models with a nonsignificant lack of fit. The estimated optimum fermentation conditions for L. plantarum K79 were as follows: a skim milk concentration of 10.76%, an incubation temperature of 36.9℃, an incubation time of 23.76 hours, and a starter added amount of 0.098%. Under these conditions, the predicted ACE inhibitory activity was 91.047%, and the predicted pH was 4.6. These predicted values achieved the objectives of the multi-response optimization in this study.

• 생물환경조절학회지
• /
• 제23권1호
• /
• pp.39-42
• /
• 2014

본 연구의 목적은 선형, 쌍곡선, 베타 함수를 이용하여 상추의 주요 온도를 예측하기 위함이다. 상추 종자를 항온 생육상에서 발아시켰다. 온도처리는 $10^{\circ}C$, $14^{\circ}C$, $16^{\circ}C$, $20^{\circ}C$, $24^{\circ}C$, $28^{\circ}C$와 $32^{\circ}C$였다. 100개의 종자를 9cm 페트리디쉬에 필터페이퍼 2장을 깔고 4반복 실시하였다. 유근이 1mm 나왔을 때를 발아로 하였다. 시간에 따른 발아율은 로지스틱 함수로 계산하였다. 최저, 최적, 최고 온도는 50% 발아한 시점의 역수를 온도에 따른 함수로 표기하여 나타내었다. 선형 함수의 경우, 최저, 최적, 최고 온도는 각각 $7.9^{\circ}C$, $23.3^{\circ}C$, $28.0^{\circ}C$였으며, 쌍곡선 함수의 경우, 최저, 최적, 최고 온도는 각각 $9.7^{\circ}C$, $19.5^{\circ}C$, $29.4^{\circ}C$였으며, 베타 함수인 경우, 최저, 최적, 최고 온도는 각각 $3.7^{\circ}C$, $20.7^{\circ}C$, $32.0^{\circ}C$였다. 최저, 최적, 최고 온도 범위는 각각 $3.7{\sim}7.9^{\circ}C$, $19.5{\sim}23.3^{\circ}C$, $28.0{\sim}32.0^{\circ}C$이었다.

• 한국약용작물학회지
• /
• 제27권5호
• /
• pp.322-329
• /
• 2019

Background: Studies have suggested that the northern provinces of Gangwon-do are good sites for licorice (Glycyrrhiza uralensis Fisch.) cultivation in Korea, as they have similar temperatures to its original locations in northern China. However, poor growth and freezing injury are often reported in Korea. Therefore, it is necessary to reassess the domestic cultivation site of licorice. Methods and Results: To determine the optimum temperature for cultivating licorice, the growth, yield, and pharmacological characteristics of G. uralensis were assessed in a temperature gradient tunnel at Eumseong, Chungcheongbuk-do, Korea in 2017. Plant height increased until the temperature rose to $5.9^{\circ}C$ above the local external temperature. Yield (㎏/10a) increased by 46.9% when the growing temperature was $1.5^{\circ}C$ to $3.0^{\circ}C$ (T2) above the external temperature and by 72.6% when the growing temperature was $3.0^{\circ}C-4.5^{\circ}C$ (T3) above the external temperature. However, a difference of $4.5^{\circ}C-5.9^{\circ}C$ (T4) above the external temperature, decreased the yield by 9.8% compared to that at T2. The glycyrrhizin content of G. uralensis roots in each temperature band was 0.72%, 0.53%, 0.91%, and 0.84% (T1, T2, T3, T4), these differences appear to result form individual plant variation rather than growth temperature. Conclusions: Based on the results of this study, we estimate that the temperature-based optimum cultivation site for G. uralensis in Korea is the south central region, rather than the northern province of Gangwon-do. Improvement in growth and yield maybe observed if the plantations in the central Jecheon (Chungcheongbuk-do, Korea) are expanded into the south central region.