• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.185-186
• /
• 2008

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/SiO2/Si) using RF sputtering method at various substrate temperature. The optimum conditions of RF power and Ar/O2 ratio were 60[W] and 70/30, respectively. The rougness showed about 4.33[nm]. Deposition rate of SBN thin films was about 4.17[nm/min]. The capacitance of SBN thin films were increased with the increase of substrate temperature.

• Plant Disease and Agriculture
• /
• v.5 no.1
• /
• pp.55-57
• /
• 1999

Botrytis cinerea was isolated from a gray mo이 leaf lesion on persimmon in fields of Kyeonsangnam-do from 1996 to 1998, and etiological study was conducted including physiological characteristics. It formed gray mold lesion with light green color on leaves of persimmon (Diospyros kaki). The temperature range for mycelial growth was between $5^{\circ}C$ and $30^{\circ}C$ with the optimum temperatures of $20^{\circ}C$ to $25^{\circ}C$. Conidia were oviod, cylindric, and colorless and their dimensions in culture were $8.4~11.5\times7.0~8.9\mu\textrm{m}$. The optimum temperature of conidial germination was $25^{\circ}C$. Sclerotia on potato dextrose agar medium were well formed and brownish condiophores were observed with their size of $18.5~64.9\times4.5~8.0\mu\textrm{m}$. Symptoms on artificially inoculated plants were similar to those of gray mold disease on persimmon caused by Botrytis cinerea in fields.

• Food Science and Preservation
• /
• v.4 no.2
• /
• pp.115-122
• /
• 1997

This experiment was hocused on the improvement of postharvest management of fresh shiitake to increase the marketing duration. the respiration rate of fresh shiitake at 2$0^{\circ}C$ was ranged from 395mg to 551mg CO2/kg/hr depending on the cultural condition. The rapid precooling is considered as one of the most important postharsvest management to remain shiitake quality. The optimum temperature for precooling and storage was -3$^{\circ}C$ because the occurrence of physical damage on frozen tissue at below -5$^{\circ}C$. Frozen storage at -3$^{\circ}C$ had benefits to minimize weight loss, browning induction at gill tissue and consumption of stored materials where as storage at $0^{\circ}C$ appeared not to be adequite for the extension of marking duration. Frozen shiitake was succesefully thawed when exposed to RH 40-50% at below 1$0^{\circ}C$.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.169-173
• /
• 2003

We demonstrated the applicability of dry film photoresist (DFR) in photolithography process for fine pitch solder bumping on the polytetrafluoroethylene (PTFE/Teflon) printed circuit board (PCB). The copper lines were formed with $100\;{\mu}m$ width and $18\;{\mu}m$ thickness on the PTFE test board, and varying the gaps between two copper lines in a range of $100-200\;{\mu}m$. The DFRs of $15\;{\mu}m$ thickness were laminated by hot roll laminator, by varying laminating temperature from $100^{\circ}C\;to\;150^{\circ}C$ and laminating speed. We found the optimum process of DFR lamination on PTFE PCB and accomplished the formation of indium solder bumps. The optimum lamination condition was temperature of $150^{\circ}C$ and speed of about 0.63 cm/s. And the smallest size of indium solder bump was diameter of $50\;{\mu}m$ with pitch of $100\;{\mu}m$.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.129-134
• /
• 2002

In this study, the experimental open-tube and close-tube thermoacoustic apparatuses were constructed. In order to determine the optimum length of resonant tube, frequency and the optimum length of stack, the resonant characteristics of thermoacoustic apparatuses were investigated, The length of resonant tube varies from 400mm to 850 mm. The experimental frequency varies from 100 Hz to 1000 Hz. In case of first harmonic, the maximum temperature difference of the open-tube thermoacoustic apparatus is 41$^{\circ}C$)resonator length: 500 mm), and the maximum temperature difference of the close-tube thermoacoustic apparatus is 42$^{\circ}C$ (resonator length : 850 mm).

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.135-139
• /
• 2002

In this study, the experimental open-tube and close-tube thermoacoustic apparatuses were built. In order to determine the optimum length of resonant tube and the optimum length of stack, the resonant characteristics of thermoacoustic apparatuses were investigated, The length of resonant tube varies from 400mm to 850mm. The experimental frequency varies from 100Hz to 1000Hz. In case of the second and third harmonics, the maximum temperature difference of open-tube thermoacoustic apparatus is 53$^{\circ}C$ (resonator length: 400mm) and the maximum temperature difference of closed-tube thermoacoustic apparatus is 51$^{\circ}C$ (resonator length: 500mm). In the open-tube thermoacoustic apparatus, the peak efficiency point is about 2%, 55%, 69% in the resonant tube and in the closed-tube thermoacoustic apparatus, the peak efficiency point is about 2%, 41%, 50% in the resonant tube.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.217-227
• /
• 2004

The bowl in a ship purifier suffers from high stress and high temperature in a detrimental heavy fuel oil environment. Duplex stainless steel(DSS) is a primary material to withstand this harsh condition. Newly-manufactured STS 329 grade DSS has been evaluated by various mechanical and electrochemical test methods. Eight heat treatment(HT) conditions with different temperature and time were applied to the DSS samples to improve corrosion resistance. Microstructure and polarization test results concluded the optimum HT condition was $1.090^{\circ}C$-60 minutes. Confirmation experiments for applying to a real bowl including stress corrosion cracking test exhibited the reproducibility of the optimum HT condition.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.365-370
• /
• 1999

To optimize the culture conditions for Beauveria bassiana 726, the effects of culture medium, pH, and temperature on mycelium and spore production were investigated. The optimum temperature and pH for the cultivation of B. bassiana 726 were 28 $^{\circ}C$ and 5.0, respectively. The optimized medium was composed of 1.0~2.0% total sugar from molasses, 0.5% corn steep liquor and 0.05% KH$_2$PO$_4$. In the cultivation of B. bassiana 726 with the optimum medium, the specific growth rate and substrate utilization were well-fitted with the proposed kinetic model in the shake flask and stirred tank reactor. When the fed-batch cultivation using carbon suorce, nitrogen source, and mineral salt as a feeding medium was compared with batch cultivation in stirred tank reactor, mycelium (12.7 g/L) and spore production (5.4$\times$$10^8/mL$) were enhanced up to 110% and 85%, respectively.

• Journal of Welding and Joining
• /
• v.8 no.3
• /
• pp.24-30
• /
• 1990

2024 Aluminium was welded by domestic manufactured continuous type friction welder. The problems and optimum condition were studied in 2024 Al-2024 Al cases. Mechanical tests and microstructure analysis were studeid. Interfacial temperature of welding was predicted by FDM. The obtained results are as follows: 1) In case of Al-Al, the optimum condition range was wide. 2) At the boundary zone, fine recrystallized zone was not harmful to the mechanical property and no growth of precipitation was observed. 3) In case of Al-Al, temperature gradient can be predictedby FDM and heat input can be taken as weld parameter.

• Journal of Korean Society of Water and Wastewater
• /
• v.7 no.2
• /
• pp.39-46
• /
• 1993

In this experimental study, it is concerned to develop a simple equation using jar-test results in order to predict the optimum dosage of coagulant, PAC(polyaluminum chloride). Considering the relationships with the reactions of coagulation and flocculation, the four independent variables (e.g. turbidity, temperature, pH and alkalinity) are selected out of many parameters and they are put into calculations to develop an equation by means of multi-regression method. As the result, the dosing rate of PAC is proportional to turbidity, pH and alkalinity, but in inverse to temperature. And the developed equation is as follow, $$D_c=\frac{3.2{\cdot}T^{0.37}{\cdot}A^{0.04}{\cdot}P^{0.5}}{t^{0.1}},\;(R^2=0.9443)$$ And also, comparing between the estimated value from the equation and the real dosing rate in the plant, Kwangam and Tdukdo, during 1988~1991, it is represented an agreement having a relative error of 16.4%, 17.8%, respectively.