• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.147-156
• /
• 2007

This study offers a design procedure of optimum cable damper for multi-mode vibration control with nonlinear damper and also investigate the relation between mode and amplitude dependency. The proposed multi-mode damping index, which is defined as a energy loss ratio of cable potential, is a main component of optimization problem of optimum nonlinear damper. In order to include the amplitude dependency of nonlinear damper, it is assumed to exist three kinds of multi-mode patterns such as ambient vibration, support excitation and rain-win induced vibration. The optimum damper exponent depends on amplitude patterns. In case of ambient vibration, optimum factor is less than 0.5. In case of support excitation or rain-wind induced vibration is between 0.5 and 1.0. In this study, the effects of cable sag and inclination angle are included in the asymptotic design equation of damped cable structures.

• 한국소음진동공학회논문집
• /
• 제17권9호
• /
• pp.785-796
• /
• 2007

This study offers a design procedure of optimum cable damper for multi-mode vibration control with nonlinear damper and also investigates the relation between mode and amplitude dependency. The proposed multi-mode damping index, which is defined as a potential energy loss ratio of cable vibration, is a main component of optimization problem of optimum nonlinear damper. In order to include the amplitude dependency of nonlinear damper, three types of multi-mode patterns such as ambient vibration, support excitation and rain-wind induced vibration are assumed. The optimum damper exponent depends on amplitude patterns. In case of ambient vibration, optimum factor is less than 0.5 and in case of support excitation or rain-wind induced vibration it is between 0.5 and 1.0.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.69-77
• /
• 2004

FRP rebar has low bond performance than steel rebar. Usually, FRP rebar has about 60% of bond strength of steel rebar. Without adequate bond to concrete, the full composite action between reinforcement and concrete matrix can not be achieved. Therefore, FRP rebars must also have surface deformations that provide good bond to concrete. The purpose of this research was decided an optimum surface deformation patterns through bond test of FRP rebar. Eighteen surface deformation patterns of FRP rebar with widely different geometries were investigated. Based on the test results, we established optimum surfale deformation pattern. Bond tests were performed for three types of surface deformation patterns of FRP rebar including sand coated rebar, ribbed rebar, and wrapped and sand coated rebar that commercially available, and two types of FRP rebar including CFRP, GFRP rebars that optimum surface deformation pattern is applied. According to bond test results, FRP rebars that optimum surface deformation pattern is applied were found to have better bond strength with concrete than currently using FRP rebar.

• 대한전자공학회논문지TC
• /
• 제44권6호
• /
• pp.57-63
• /
• 2007

본 논문에서는 모노 펄스 추적용 배열안테나에서 주로 사용하는 선전원에 의한 차패턴 합성법을 새로이 제안한다. 제안한 방법에서는 잘 알려진 Bayliss의 차패턴 합성법과는 달리 Taylor의 선전원 합패턴 공식을 적절히 수정하여, 원하는 개별 sidelobe 레벨을 갖는 차패턴을 최적 합성한다. 즉, 차패턴과 해당 소스 분포함수와의 관계를 해석적으로 설정하고, 패턴이 갖는 null점을 최적으로 섭동시킴으로써 원하는 패턴과 해당 소스 분포함수를 동시에 도출한다. 더욱이 이 방법은 기존의 방법보다 빠른 sidelobe 감쇠율을 가지도록 한다. 수치적인 결과들로부터 제안한 합성과정의 타당성과 유용성을 보인다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.730-733
• /
• 2003

Dual coding technique is one of the popular techniques to reduce the dynamic false contours on PDP. Subfield pattern is a key factor affecting the performance of dual coding technique. In this paper, an optimum subfield selection method based on genetic algorithm is proposed. Two types of string structures are defined to account for all the possible configurations of the dual coding subfield patterns. Genetic operators are proposed for optimization of dual coding subfield pattern. Quantitative measures to describe degrees of dynamic false contours and checkerboard patterns are defined. Experimental results indicate that dual coding subfield pattern that is determined by proposed method reduces dynamic false contours and checkerboard patterns.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.357-374
• /
• 2014

The design basis is being shifted from strength to deformation in modern performance-based design codes. This paper presents a practical method for optimization of eccentrically braced steel frames, based on the concept of uniform deformation theory (UDT). This is done by gradually shifting inefficient material from strong parts of the structure to the weak areas until a state of uniform deformation is achieved. In the first part of this paper, UDT is implemented on 3, 5 and 10 story eccentrically braced frames (EBF) subjected to 12 earthquake records representing the design spectrum of ASCE/SEI 7-10. Subsequently, the optimum strength-distribution patterns corresponding to these excitations are determined, and compared with four other loading patterns. Since the optimized frames have uniform distribution of deformation, they undergo less damage in comparison with code-based designed structures while having minimum structural weight. For further investigation, the 10 story EBF is redesigned using four different loading patterns and subjected to 12 earthquake excitations. Then a comparison is made between link rotations of each model and those belonging to the optimized one which revealed that the optimized EBF behaves generally better than those designed by other loading patterns. Finally, efficiency of each loading pattern is evaluated and the best one is determined.

• 한국전산구조공학회논문집
• /
• 제12권2호
• /
• pp.215-221
• /
• 1999

본 연구에서는 구조물의 변위 제약조건을 고려한 위상 최적설계를 체스판무늬 검색 알고리즘과 가상하중을 이용하여 수행하였다. 본 연구에서는 변위 제약조건의 민감도 계산을 위하여 가상 변위장을 도입하였으며, 밀도와 유효강성계수의 상관관계를 정의하기 위하여 가상재료를 도입하였다. 또한, 선형 유한요소를 이용한 위상 최적화 기법에서 일반적으로 나타나는 체스판무늬를 제거하기 위하여 밀도 재분배방법을 이용하였다. 그리고, 변위 제약조건을 고려한 경우와 그렇지 않은 경우의 수치예제를 비교 검토함으로써 본 연구의 타당성을 검증하였다.

• 한국지열·수열에너지학회논문집
• /
• 제14권4호
• /
• pp.61-67
• /
• 2018

Solar energy depends on the altitude and azimuth of the sun, and the amount of energy collected on the slope depends on the latitude of the area being installed. However, since most solar heating systems are fixed to the ground, it is necessary to analyze the optimal installation angle from the early design stage. However, problems arise when energy consumption is not considered together because heating systems are not used in the summer In this study, the optimum installation angles of the solar collectors according to the latitude of the installation area are not simply determined by the amount of energy collected, but because the system is overheated due to climate change or energy usage patterns, And the amount of additional energy input.

• 한국농림기상학회지
• /
• 제3권1호
• /
• pp.55-70
• /
• 2001

It was unusual crop weather for 1998 and 1999 compared with normal in Korea. The consecutive days of the optimum ripening period for rice plant that had daily mean temperature 21~23$^{\circ}C$ for 40 days after flowering, increased with long anomalies in 1998~99. The air temperature during ripening period was much higher than the optimum temperature and lower sunshine hour than norm in the local adaptability tests of newly developed rice lines during those years. In response of rice cultivation to warming and cloudy weather during crop season, the yield shall be decreased. Most scientists agree that the rate of heating is accelerating and temperature change could become increasingly disruptive. Weather patterns should also become more erratic. Agrometeorologists could be analyzed yearly variations of temperature, sunshine hour and rainfall pattern focused on transient agroclimate change for last a decade. Rice agronomists could be established taking advantage of real time agricultural meteorology information system for fertilization, irrigation, pest control and harvest. Also they could be analyzed the characteristics of flowering response of the recommended and newly bred rice cultivars for suitable cropping plan such as cultural patterns and sowing or transplanting date. Rice breeders should be deeply considered introducing the characteristics of basic vegetative type of flowering response like Togil rices as prospective rice cultivars corresponding to global warming because of the rices needed higher temperature at ripening stage than japonica rices, photoperiod-sensitive and thermo-sensitive ecotypes.

• 한국전자파학회논문지
• /
• 제19권5호
• /
• pp.533-540
• /
• 2008

등간격 안테나 소자들로 구성된 모노펄스 추적용 선형 배열 안테나의 합 및 차 패턴 합성 문제에서 원하는 패턴을 만족시키도록 하는 개별 안테나 급전 여기 전류의 상대적인 가중치들을 도출하는 효율적인 수치적 방법을 제안한다. 이 방법은 패턴 배열 인자를 표현하는 Schelkunoff 다항식에 내재된 패턴 null 점들의 최적 섭동에 기본을 둔다. 따라서 여기 전류 가중치들을 직접 최적화하는 기존의 방식과는 달리, 이 방법은 null 점 제어에 의해 원하는 개별 sidelobe 레벨(SLL)들을 갖는 패턴과 해당 여기 전류 가중치들을 쉽게 합성할 수 있는 장점을 가진다. 또한, 최적화 과정에서 null 점 초기값에 따라 두 가지 형태의 차 패턴들을 합성할 수 있음을 보인다. 임의의 SLL들을 갖는 패턴들을 합성하고, 도출된 결과들을 배열 인자 식에 대입함으로써 제안한 방법의 타당성을 수치적으로 검증한다.