• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.143-151
• /
• 2008

본 연구에서는 2차 비탄성해석과 단면점증법을 이용한 평면 강골조 구조물의 최적설계 방법을 제시하였다. 2차 비탄성해석은 구조시스템과 그에 속한 부재들의 기하학적 비선형과 재료적 비선형을 고려하기 때문에 2차 비탄성해석에 바탕을 둔 설계법에서는 해석 후 개별부재의 강도검토가 필요 없다. 본 논문에서 제안한 단면점증법을 최적화 기법으로 사용하였으며 목적함수로 구조물의 중량을 사용하였다. 제약조건식은 구조시스템의 하중-저항능력, 처짐 및 층간 수평변위 등을 고려하였으며 제안된 방법에 의한 설계결과를 다른 방법에 의한 것들과 비교하여 그 효율성을 증명하였다.

• 품질경영학회지
• /
• 제41권1호
• /
• pp.149-162
• /
• 2013

Purpose: The purpose of this study was to design of a probabilistic model for optimum manpower planning in R&D department by Montecarlo simulation. Methods: We investigate the process and the requirement of manpower planning and scheduling in R&D department. The empirical distributions of necessary time and manpower for R&D projects are developed. From the empirical distributions, we can estimate a probability distribution of optimum manpower in R&D department. A simulation method of estimating the probability distribution of optimum manpower is considered. It is a useful tool for obtaining the sum, the variance and other statistics of the distributions. Results: The real industry cases are given and the properties of the model are investigated by Montecarlo Simulation. we apply the model to the research laboratory of the global company, and investigate and compensate the weak points of the model. Conclusion: The proposed model provides various and correct information such as average, variance, percentile, minimum, maximum and so on. A decision maker of a company can easily develop the future plan and the task of researchers may be allocated properly. we expect that the productivity can be improved by this study. The results of this study can be also applied to other areas including shipbuilding, construction, and consulting areas.

• Architectural research
• /
• 제4권1호
• /
• pp.1-6
• /
• 2002

Every year new tall buildings are being conceived, designed, and built with new schemes. Thus it is important to explore the factors that affect tall building design. Thus it is important to explore the tall building design factors. The planning and design of tall buildings require different criteria than those that exist in regular size buildings. Tall buildings are uniquely expressed by their structural systems where exterior esthetic and requirements of space drive the form and composition of the structural systems. Therefore the exploration of design factors is the key to achieve optimum building systems. Optimization as mentioned here is associated with the efficiency of the different building systems. To achieve an optimal system, there is a need for an understanding of the factors that affect on overall tall building design such as planning module, building function, lease span, floor-to-floor-height, building height (aspect ratio), structural system, environmental systems. In this paper a statistical approach will be used and will be based on data collected from the practice through a rigorous survey taken. This information is tabulated and analyzed. The major target of investigation will be lease span related to space requirement in the tall building planning. Factors related to lease spans, such as function, floor-to-floor height, planning module, building height, overall plan dimension, and plan ratio (building geometry), will be looked at carefully. IN conclusion, this approach of optimization can introduce a preliminary design guideline for tall building projects. The purpose of the paper should shed some light on the optimum tall building design criteria.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.93-102
• /
• 2007

The frontal crash optimization of an engine room member using the response surface method was studied. The engine room member is composed of the front side member and the sub-frame. The thicknesses of the panels on the front side member and the sub-frame were selected as the design variables. The purpose of the optimization was to reduce the weight of the structure, under the constraint that the objective quantity of crash energy is absorbed. The response surface method was used to approximate the crash behavior in mathematical form for optimization procedure. To research the effect of the regression method, two different methodologies were used in constructing the response surface model, the least square method and the moving least square method. The optimum with the two methods was verified by the simulation result. The precision of the surrogate model affected the optimal design. The moving least square method showed better approximation than the least square method. In addition to the deterministic optimization, the reliability-based design optimization using the response surface method was executed to examine the effect of uncertainties in design variables. The requirement for reliability made the optimal structure be heavier than the result of the deterministic optimization. Compared with the deterministic optimum, the optimal design using the reliability-based design optimization showed higher crash energy absorption and little probability of failure in achieving the objective.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권2호
• /
• pp.40-45
• /
• 2005

This paper has presented an application of an optimum grinding conditions based on the fuzzy logic. Fuzzy logic can handle vague and uncertain knowledge, and presents a scheme for integrating data with various kinds of grinding data. Especially, this research is capable of determining the grinding conditions taking into account some fuzzy membership function represented for trapezoidal form such as hardness and surface roughness of workpiece, material tensile strength and elongation, and requirement of grinding method. Larsen's fuzzy production method utilizing the fuzzy production rule can be applied on the establishment of grinding conditions, and also the output value obtained by the center of gravity method can effectively utilize the optimum grinding conditions.

• 산업공학
• /
• 제9권3호
• /
• pp.64-71
• /
• 1996

In the survivability and simplicity aspect, SONET Self-healing Ring(SHR) is one of the most important schemes for the high-speed telecommunication networks. Since the ring capacity requirement is defined by the largest STS-1 cross-section in the ring, load balancing is the key issue in the design of SONET SHR. Recently, most of the research on load balancing problem have been concentrated on the SONET single-ring case. However, in certain applications, multiple-ring configuration is necessary because of the geographical limitations or the need for extra bandwidth. In this paper, the load balancing problem for SONET dual-ring is considered by assuming symmetric inter-ring demands. We present a linear programming based formulation of the problem. Initial solution and improvement procedures are presented, which solves the routing and interconnection between the two rings for each demand. Computational experiments are performed on various size of networks with randomly generated demand sets. Results show that the proposed algorithm is excellent in both the solution quality and the computational time requirement. The average error bound of the solutions obtained is 0.26% of the optimum.

• 대한조선학회지
• /
• 제24권2호
• /
• pp.20-28
• /
• 1987

In general, preliminary hull form design is performed by changing a parent hull form using a computer to satisfy given requirements, e.g., principal dimensions, displacement, $L_{CB}$, and etc. Principal dimensions, $C_b,\;L_{CB}$ and midship sections are the only parameters to be modified in the traditional hull form variation methods available for preliminary design. In this paper, a method is presented in which local cross sections as well as principal dimensions and midship sections are modified according to design requirements. The method gives hydrostatic curves of modified hull form simultaneously. An optimization technique to satisfy the constraints of hydrostatic characteristics such as maximizing KM as a design requirement is also considered.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.7-12
• /
• 2011

This study covers the optimum design of the 5-axis machine tool. In addition, the intelligent control secures structural stability through the optimum design of the structure of the 5-axis machine center, main spindle, and the tilting index table. The big requirement, like above, ultimately leads to speed-up operation. And this is inevitable to understand the vibration phenomenon and its related mechanical phenomenon in terms of productivity and its accuracy. In general, the productivity is correlated with the operation speed and it has become bigger by its vibration scale and the operation speed so far. Vibration phenomenon and its heat-transformation of the machine is naturally occurred during the operation. If these entire machinery phenomenons are interpreted through the constructive understanding and the interpretation of the naturally produced vibration and heat-transformation, it would be very useful to improve the rapidity and its stability of the machine operation indeed. In this dissertation, the problems of structure through heating, stability, dynamic aspect and safety about intelligent 5-wheel machine tool are discovered to examine. All these discoveries are applied to the structure in order to enhance the density of it. It aims to improve the stability.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.94-98
• /
• 2007

The latest development of the submarine oil field and the deep-sea explorer, FPSO is commonly proposed and used for offshore oil production. And because the fundamental requirement of FPSOs to remain moored at their position, they are unable to avoid severe weather and environment. FPSO normally operates head to the weather, and sensitive equipment located the exposed area will be influenced by green water damages, the damages may occur to both onboard equipment and topside structures with resulting risk to personnel. In this paper, the main focus considers the physical structures of green water protector in order to preserve topside structures, equipment and personnel from green water.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.121-122
• /
• 2002

The main principle of radiation therapy is to deliver optimum dose to tumor to increase tumor cure probability while minimizing dose to critical normal structure to reduce complications. RTP system is required for proper dose plan in radiation therapy treatment. The main goal of this research is to develop dose model for photon, electron, and brachytherapy, and to display dose distribution on patient images with optimum process. The main items developed in this research includes: (l) user requirements and quality control; analysis of user requirement in RTP, networking between RTP and relevant equipment, quality control using phantom for clinical application (2) dose model in RTP; photon, electron, brachytherapy, modifying dose model (3) image processing and 3D visualization; 2D image processing, auto contouring, image reconstruction, 3D visualization (4) object modeling and graphic user interface; development of total software structure, step-by-step planning procedure, window design and user-interface. Our final product show strong capability for routine and advance RTP planning.