• Computers and Concrete
• /
• v.10 no.6
• /
• pp.587-607
• /
• 2012

The purpose of this research is to propose a design technique of concrete mix proportions satisfying service life through genetic algorithm (GA) and neural network (NN). For this, thirty mix proportions and the related diffusion coefficients in high performance concrete are analyzed and fitness function for diffusion coefficient is obtained considering mix components like w/b (water to binder ratio), cement content, mineral admixture (slag, flay ash and silica fume) content, sand and coarse aggregate content. Through averaging the results of 10 times GA simulations, relative errors to the previous data decrease lower than 5.0% and the simulated mix proportions are verified with the experimental results. Assuming the durability design parameters, intended diffusion coefficient for intended service life is derived and mix proportions satisfying the service life are obtained. Among the mix proportions, the most optimized case which satisfies required concrete strength and the lowest cost is selected through GA algorithm. The proposed technique would be improved with the enhancement of comprehensive data set including wider the range of diffusion coefficients.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.410-417
• /
• 2012

One of the premier mechanisms used in extracting unobserved signals from observed mixtures in signal processing is employing a blind source separation (BSS) algorithm. Orthogonal frequency division multiplexing (OFDM) techniques are playing a prominent role in the sphere of multicarrier communication. A set of remedial solutions taken to mitigate deteriorative effects caused within the air interface of OFDM transmission with aid of BSS schemes is presented. Four energy functions are used in deriving the filter coefficients. Energy criterion functions to be optimized and the performance is justified. These functions together with iterative fixed point rule for receive signal are used in determining the filter coefficients. Time correlation properties of the channel are taken advantage for BSS. It is tried to remove colored noise and jamming components from themixture at the receiver. Themethod is tested in a slow fading channel with a receiver containing equal gain combining to treat the channel state information values. The importance is that, these are quite low computational complexity mechanisms.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.827-830
• /
• 2000

In this paper, we propose the method using PCA(principal component analysis) algorithm when proposed algorithm performs multimedia information indexing. After we extract DC coefficients of DCT from MPEG video stream which is an international standard of moving picture compression coding, we apply PCA algorithm to image made of DC coefficients and extract the feature of each DC image. Using extracted features, we generate codebook and perform multimedia information indexing. The proposed algorithm Is very fast when indexing and can generate optimized codebook because of using statistical feature of data

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.143-150
• /
• 2004

In this paper, a recursive digital filter realization for an ionospheric channel model is proposed. This realization is in the form of a cascade of identical second-order all-pass filters, and is determined by only three parameters; two coefficients of an all-pass section, and the number of sections. The values of these parameters are optimized by a nonlinear optimization algorithm called the "downhill simplex method", so that the resulting time delay function closely approximates that of the ionospheric channel model. Comparing with the nonrecursive digital filter realization, it can be shown that the proposed recursive-digital-filter-realization is advantageous in points of view for the numbers of filter coefficients and the realization.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.139-145
• /
• 2001

The objective of experimental study is to apply simultaneous measurement by PIV(Particle Image Velocimetry) to high_speed flow characteristics within ginseng cleaner model. Three different kinds of flow rate(15. 20, 27l/min) are selected as experimental condition. Optimized cross correlation identification to obtain velocity distribution, time-mean velocity distribution, velocity, profile, kinetic energy and turbulence intensity are represented quantitatively for the deeped understanding of the flow characteristics in a ginseng cleaner model.

• Journal of the Korean Magnetic Resonance Society
• /
• v.3 no.1
• /
• pp.36-43
• /
• 1999

We present a pulse shape tailored for broadband decoupling for a system of spin-1/2's with scalar couplings as well. In crafting the pulse shape Coherent Averaging Theory and Fourier expansion method are used. The Fourier expansion coefficients are optimized numerically by applying the Simulated Annealing Method. The decoupling performance of the shaped pulse thus designed is then compared with the well-known composite pulse sequence, DIPSI-2. It is shown that the shaped pulse performs well even at the conditions where the DIPSI sequence begins to fail.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1379-1382
• /
• 1987

IN ADAPTIVE LINEAR PREDICTION, AN ADAPTIVE CAPABILITY IS BUILT INTO THE PROCESSOR SUCH THAT AS THE IMAGE STATISTICS CHANGE, THE PREDICTION FILTER COEFFICIENTS THEMSELVES CHANGE, PRODUCING A NEW FILTER MORE CLOSELY OPTIMIZED TO THE NEW SET OF IMAGES STATISTICS. THE LMS ALGORITHM MAY BE USED TO ADAPT THE COEFFICIENT OF AN ADAPTIVE PREDICTION FILTER FOR IMAGE SOURCE ENCODING. IN THIS PAPER, TWO CODING SYSTEMS USING DPCM AND LMS ALGORITHMS RESPECTIVELY FOR OBTAINING THE FIRST TRANSFORMED COEFFICIENT IN HYBRID CODING ARE COMPARED.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.173-176
• /
• 1999

Frequency responses of the surface acoustic wave(SAW) filters are simulated by using the impulse modeling. The simulation technique of the SAW filters is to use the Fourier transformation to make a correspondence between the impulse response of the filter and the taps in the delay line. Since the Fourier series must be truncated after a finite number of terms, window functions are often used to weight the coefficients to obtain the desirable side-lobe level and bandwidth. The filter design is operated through the iterative simulation procedures. The design process is capable of yielding filters with optimized frequency response characteristics.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1920-1923
• /
• 2003

This paper presents compression rate improvement for SPIHT algorithm though redundancy bit removing. Proposed SPIHT algorithm uses a method to select of optimized threshold from feature of wavelet transform coefficients and removes sign bit if coefficient of LL area. Experimental results show that the proposed algorithm achieves more improvement bit rate and more fast progressive transmission with low bit rate.

• 연구논문집
• /
• s.30
• /
• pp.59-65
• /
• 2000

The objective of experimental study is to apply simultaneous measurement by PIV(Particle Image Velocimetry)to high_speed flow characteristics within Ginseng washing machine. Three different kinds of flow rate(15,20,27 $\ell$/min)are selected as experimental conditions. Optimized cross correlation identification to obtain velocity vectors is implemented by direct calculation of correlation coefficients. Instantaneous velocity distribution, time-mean velocity distribution and velocity profiles are represented quantitatively at the full-scale region for the deeper understanding of the flow characteristics in Ginseng washing machine.