• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.410-416
• /
• 2009

In recent years, the rollover accident of large class of vehicles has become important safety issue. Even though the rollover form a small percentage of all traffic accidents, they have a fatal effect upon the driver and passenger. Among the traffic accidents occurred in driving, the rollover is the major cause of traffic fatalities. Therefore, it is required to develop the analytical and experimental techniques for predicting rollover propensity of vehicles and also to improve the vehicle suspension design in the viewpoint of rollover resistance. In this study, the parameter sensitivities for the roll angle of SUV suspension are analyzed, and then the determined design parameters are optimized by using the regression model function of the response surface methods. The analysis results show that the roll angle of the optimized vehicle is decreased as compared with the initial vehicle and also the rollover possibility is decreased when the roll rate of the front suspension is larger than the roll rate of the rear suspension.

• 분석과학
• /
• 제8권3호
• /
• pp.273-279
• /
• 1995

납과 카드뮴을 포함하는 여러 가지 농도의 동결건조된 혈액이 외부정도관리 시료로서 제조되었다. 이 시료들은 흑연료 원자흡수분광법(GFAAS)을 이용하여 성능이 파악되었다. 매트릭스 개선제로서 0.1% ammonium dihydrogen phosphate와 0.1% Triton X-100을 사용하여 섭씨 600 내지 650도의 회화온도에서 혈액에 있는 납과 카드뮴의 정량 분석을 위한 GFAAS의 최적 분석조건이 얻어졌다. 제조된 혈액의 균질도와 안정도는 최적화된 분석조건에서 연구되었다.

• 한국조리학회지
• /
• 제23권4호
• /
• pp.81-92
• /
• 2017

This research was studied to optimize the recipe of rice pound cake with two concentrations of Euonymus alatus and grape seed oil, using central composite design (CCD). The mixing condition of rice pound cake was optimized by subjecting it to sensory evaluation and mechanical and physicochemical analysis, using response surface methodology (RSM). The results of the mechanical and physicochemical analysis showed significant values for color (lightness, redness, yellowness), texture (hardness, springiness, chewiness, gumminess, cohesiveness), loss rate, volume, specific volume, sweetness, saltiness, moisture content and pH (p<0.05). The results of the sensory evaluation showed significant values for color, flavor, taste, softness, appearance and overall quality (p<0.05). As a result, the optimized compounding ratio was found to be 4.28 g of Euonymus alatus and 33.18 g of grape seed oil.

• Advances in Computational Design
• /
• 제1권2호
• /
• pp.139-154
• /
• 2016

The usage of sandwich structure is extensively increasing in lightweight protective structures due to its low density and other useful properties. Sandwich panels made of metal sheets with unfilled cellular cores are found to exhibit lower deflections by comparing to an equivalent monolithic plate of same metal and similar mass per unit density. However, the process of localized impact on solid structures involving plastic deformation, high strain rates, temperature effect, material erosion, etc. does not hold effectively as that of monolithic plate. In present work, the applications of the sandwich plate with corrugated core have been extended to develop optimized lightweight armour using foam as medium of its core by explicit finite element analysis (FEA). The mechanisms of hardened steel projectile penetration of aluminum corrugated sandwich panels filled with foams have been numerically investigated by finite element analysis (FEA). A comparative study is done for the triangular corrugated sandwich plate filled with polymeric foam and metallic foam with different densities in order to achieve the optimum penetration resistance to ballistic impact. Corrugated sandwich plates filled with metallic foams are found to be superior when compared to the polymeric one. The optimized results are then compared with that of equivalent solid and unfilled cores structure to observe the effectiveness of foam-filled corrugated sandwich plate which provides an effective resistance to ballistic response. The novel structure can be the alternative to solid aluminum plate in the applications of light weight protection system.

• Nuclear Engineering and Technology
• /
• 제32권3호
• /
• pp.244-253
• /
• 2000

A Simple Large Model (SLM), which can be used to make thermal calculation for a deep geological repository with finite number of HLW canisters, was developed. In order to develop the SLM, a Simple Basic Model (SBM), which will be a unit of the SLM, was optimized first. The SBM was optimized to achieve the same maximum buffer temperature as that of the Detailed Basic Model (DBM) representing the real geometric aspects of the repository. In contrast to the models with the assumption of infinite number of canisters which cannot consider boundary effect, the SLM can model the real repository with finite number of canisters and thus consider the boundary effect. Thermal results from the SLM can be used to evaluate the reliability of the models, which do not consider boundary effect. This model can also be used to simulate the thermal layout design and to analyze the thermal safety of a deep geological repository as well as an underground laboratory.

• 한국재난정보학회 논문집
• /
• 제8권3호
• /
• pp.204-212
• /
• 2012

경량혼합토는 건설잔토나 준설토 및 현장에서 발생하는 점토나 실트질 흙을 사토처리 하지않고 현장에서 유용할 수 있는 매우 경제적이고 환경친화적인 재료이다. 최근에는 페자원(폐타이어가루, 왕겨)을 경량혼합토에 첨가하는 건설재료 재활용에 관한 연구가 진행 중에 있다. 본 연구에서는 경량혼합토를 제작하기 위해 필요한 배합설계변수인 원료토의 중량, 함수비 및 기포재와 첨가할 물의 양, 그리고 강도를 발현하기 위하여 필요한 고화재로서 시멘트첨가량에 대한 최적의 배합설계에 대한 분석을 하였다. 이를 위하여 일축압축시험에 의한 응력-변형 거동과 양생기간 및 성분비에 따른 강도분석, 폐기물 성분비에 대한 실험강도 비교분석을 수행하였다. 마지막으로, 합리적이고 경제적인 배합비 산출을 위하여 경량혼합토의 목표강도를 결정하고 최적의 배합설계 변수를 제시하였다.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.403-410
• /
• 2008

This paper describes the optimization of the rudder section by the genetic algorism based on VLM(Vortex Lattice Method) and panel method. The developed propeller-rudder analysis program has been validated by comparing with experimental data. The research extends to optimize the anti-erosion rudder section of the large container ship. The object function is the amount of pressure at leading edge of rudder which is closely related with erosion phenomena. The optimized rudder has been compared with conventional rudder with NACA 0021 section by analyzing with the developed program. The finally optimized section has low and mild pressure distribution in comparison with the NACA rudder. The experiments is expected to be carried out for the validation of the present optimization and more parametric study of section geometry is also expected to be conducted in the near future.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1205-1205
• /
• 2003

Rotary compressors are one of the most important parts of air-conditioners in the industry This device usually has noise problems during the circulation process of the refrigerant and muffler is used for the noise reduction. The acoustic performance of the muffler depends on its shape and its hole locations on the upper surface. Therefore finding the optimum location of the muffler holes is a topic of increasing importance in the compressor industry. In this research the optimization of the muffler hole locations and the importance of the resonator cavity on the lower surface of the muffler in acoustic point of view is studied. At first, the topology optimization for the 2 hole muffler is performed based on a model without resonator cavity by using genetic algorithm. The 2 hole muffler's acoustic analysis and experiment results are matching, however, the optimized model's results are not. By adding the resonator cavity and also by changing the cavity shape, the acoustic analysis and experiment result comparison is Performed for different cavity shapes. The topology optimization of the revised model with cavity is carried out for noise reduction. Finally, the optimized design is produced and tested for validation.

• 한방재활의학과학회지
• /
• 제21권4호
• /
• pp.167-179
• /
• 2011

Objectives: In this study, we used with visceral fat area(VFA)/subcutaneous fat area(SFA) ratio(V/S ratio) and bioelectrical impedence analysis(BIA) for a comparative study between VFA measured from several abdominal computed tomography(CT) images and obesity indexes, such as body mass index(BM), waist circumference(WC), and waist-hip ratio(WHR). Methods: A group of 63 test subjects were gathered in the oriental medical hospital of Kyung-Won university. BIA for body composition and body size for obesity indexes were estimated to evaluate the obesity indexes. Pearson correlation coefficients and regression analysis were used to select useful obesity index. Results: The VFA-CT was significantly related to BMI, SFA, WC, hip circumference(HC), body fat mass(BFM), basal metabolic rate(BMR), and VFA-BIA. Especially, we found that the VFA-BIA and BMI were significantly correlated to VFA-CT. Conclusions: VFA-BIA index is an optimized index for diagnosis and evaluation of obesity. Finally, we found that the BMI is optimized to represent VFA.

• 대한영양사협회학술지
• /
• 제23권1호
• /
• pp.14-26
• /
• 2017

The purpose of this study was to determine the optimal recipe of rice cookies with two different amounts of Stevia rebaudiana leaf and grape seed oil, using a central composite design (CCD). In addition, mixing conditions of rice cookies were optimized by sensory evaluation and mechanical and physicochemical analysis using response surface methodology (RSM). RSM was used to obtain 10 experimental points (including two replicates of Stevia rebaudiana leaf and Grape seed oil), and the formulation of Stevia rebaudiana leaf added rice cookies was optimized using rheology. The results of mechanical and physicochemical analysis showed significant values for lightness, redness, yellowness, hardness, spread factor, loss rate, leavening rate, sweetness, moisture, pH, and density (P<0.001), results of the sensory evaluation showed significant values for color, flavor, taste, texture, appearance, and overall quality (P<0.05). As a results, optimal sensory ratio was found to be 1.98 g of Stevia rebaudiana leaf and 37.94 g of Grape seed oil.