• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.4
• /
• pp.410-416
• /
• 2009

In recent years, the rollover accident of large class of vehicles has become important safety issue. Even though the rollover form a small percentage of all traffic accidents, they have a fatal effect upon the driver and passenger. Among the traffic accidents occurred in driving, the rollover is the major cause of traffic fatalities. Therefore, it is required to develop the analytical and experimental techniques for predicting rollover propensity of vehicles and also to improve the vehicle suspension design in the viewpoint of rollover resistance. In this study, the parameter sensitivities for the roll angle of SUV suspension are analyzed, and then the determined design parameters are optimized by using the regression model function of the response surface methods. The analysis results show that the roll angle of the optimized vehicle is decreased as compared with the initial vehicle and also the rollover possibility is decreased when the roll rate of the front suspension is larger than the roll rate of the rear suspension.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.273-279
• /
• 1995

Lyophilized whole blood samples containing various concentrations of Pb and Cd have been prepared as external quality control materials. These materials have been characterized with graphite furnace atomic absorption spectrometry(GFAAS), The optimized conditions for the quantitative determination of Ph and Cd in whole blood using GFAAS were obtained at the ashing temperature of $600{\sim}650^{\circ}C$ with 0.1% ammonium dihydrogen phosphate and 0.1% Triton X-100 as matrix modifier. Homogeniety and stability of the prepared whole blood have been studied at the optimized analytical condition.

• Culinary science and hospitality research
• /
• v.23 no.4
• /
• pp.81-92
• /
• 2017

This research was studied to optimize the recipe of rice pound cake with two concentrations of Euonymus alatus and grape seed oil, using central composite design (CCD). The mixing condition of rice pound cake was optimized by subjecting it to sensory evaluation and mechanical and physicochemical analysis, using response surface methodology (RSM). The results of the mechanical and physicochemical analysis showed significant values for color (lightness, redness, yellowness), texture (hardness, springiness, chewiness, gumminess, cohesiveness), loss rate, volume, specific volume, sweetness, saltiness, moisture content and pH (p<0.05). The results of the sensory evaluation showed significant values for color, flavor, taste, softness, appearance and overall quality (p<0.05). As a result, the optimized compounding ratio was found to be 4.28 g of Euonymus alatus and 33.18 g of grape seed oil.

• Advances in Computational Design
• /
• v.1 no.2
• /
• pp.139-154
• /
• 2016

The usage of sandwich structure is extensively increasing in lightweight protective structures due to its low density and other useful properties. Sandwich panels made of metal sheets with unfilled cellular cores are found to exhibit lower deflections by comparing to an equivalent monolithic plate of same metal and similar mass per unit density. However, the process of localized impact on solid structures involving plastic deformation, high strain rates, temperature effect, material erosion, etc. does not hold effectively as that of monolithic plate. In present work, the applications of the sandwich plate with corrugated core have been extended to develop optimized lightweight armour using foam as medium of its core by explicit finite element analysis (FEA). The mechanisms of hardened steel projectile penetration of aluminum corrugated sandwich panels filled with foams have been numerically investigated by finite element analysis (FEA). A comparative study is done for the triangular corrugated sandwich plate filled with polymeric foam and metallic foam with different densities in order to achieve the optimum penetration resistance to ballistic impact. Corrugated sandwich plates filled with metallic foams are found to be superior when compared to the polymeric one. The optimized results are then compared with that of equivalent solid and unfilled cores structure to observe the effectiveness of foam-filled corrugated sandwich plate which provides an effective resistance to ballistic response. The novel structure can be the alternative to solid aluminum plate in the applications of light weight protection system.

• Nuclear Engineering and Technology
• /
• v.32 no.3
• /
• pp.244-253
• /
• 2000

A Simple Large Model (SLM), which can be used to make thermal calculation for a deep geological repository with finite number of HLW canisters, was developed. In order to develop the SLM, a Simple Basic Model (SBM), which will be a unit of the SLM, was optimized first. The SBM was optimized to achieve the same maximum buffer temperature as that of the Detailed Basic Model (DBM) representing the real geometric aspects of the repository. In contrast to the models with the assumption of infinite number of canisters which cannot consider boundary effect, the SLM can model the real repository with finite number of canisters and thus consider the boundary effect. Thermal results from the SLM can be used to evaluate the reliability of the models, which do not consider boundary effect. This model can also be used to simulate the thermal layout design and to analyze the thermal safety of a deep geological repository as well as an underground laboratory.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.204-212
• /
• 2012

Lightweight soils are very economical and environment friendly materials that are valuable in field without wasting construction materials, dredged soils and clay/ silty soils during construction. Recently, the research of lightweight soils mixed with recycled material (recycled tire powder, rice husks) have been investigated. In this study the mix design factors (i.e., weight of soil, water content, foaming agent and added water) were analyzed and optimized mix design was suggested using cement content for revealing strength. For the analysis the stress-strain behavior, strength with respect to time, and experimental strength for the component of recycled material were analyzed. Finally, target strength was determined to calculate reasonable and economical mix ratio and the optimized cement content was suggested.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.403-410
• /
• 2008

This paper describes the optimization of the rudder section by the genetic algorism based on VLM(Vortex Lattice Method) and panel method. The developed propeller-rudder analysis program has been validated by comparing with experimental data. The research extends to optimize the anti-erosion rudder section of the large container ship. The object function is the amount of pressure at leading edge of rudder which is closely related with erosion phenomena. The optimized rudder has been compared with conventional rudder with NACA 0021 section by analyzing with the developed program. The finally optimized section has low and mild pressure distribution in comparison with the NACA rudder. The experiments is expected to be carried out for the validation of the present optimization and more parametric study of section geometry is also expected to be conducted in the near future.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1205-1205
• /
• 2003

Rotary compressors are one of the most important parts of air-conditioners in the industry This device usually has noise problems during the circulation process of the refrigerant and muffler is used for the noise reduction. The acoustic performance of the muffler depends on its shape and its hole locations on the upper surface. Therefore finding the optimum location of the muffler holes is a topic of increasing importance in the compressor industry. In this research the optimization of the muffler hole locations and the importance of the resonator cavity on the lower surface of the muffler in acoustic point of view is studied. At first, the topology optimization for the 2 hole muffler is performed based on a model without resonator cavity by using genetic algorithm. The 2 hole muffler's acoustic analysis and experiment results are matching, however, the optimized model's results are not. By adding the resonator cavity and also by changing the cavity shape, the acoustic analysis and experiment result comparison is Performed for different cavity shapes. The topology optimization of the revised model with cavity is carried out for noise reduction. Finally, the optimized design is produced and tested for validation.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.4
• /
• pp.167-179
• /
• 2011

Objectives: In this study, we used with visceral fat area(VFA)/subcutaneous fat area(SFA) ratio(V/S ratio) and bioelectrical impedence analysis(BIA) for a comparative study between VFA measured from several abdominal computed tomography(CT) images and obesity indexes, such as body mass index(BM), waist circumference(WC), and waist-hip ratio(WHR). Methods: A group of 63 test subjects were gathered in the oriental medical hospital of Kyung-Won university. BIA for body composition and body size for obesity indexes were estimated to evaluate the obesity indexes. Pearson correlation coefficients and regression analysis were used to select useful obesity index. Results: The VFA-CT was significantly related to BMI, SFA, WC, hip circumference(HC), body fat mass(BFM), basal metabolic rate(BMR), and VFA-BIA. Especially, we found that the VFA-BIA and BMI were significantly correlated to VFA-CT. Conclusions: VFA-BIA index is an optimized index for diagnosis and evaluation of obesity. Finally, we found that the BMI is optimized to represent VFA.

• Journal of the Korean Dietetic Association
• /
• v.23 no.1
• /
• pp.14-26
• /
• 2017

The purpose of this study was to determine the optimal recipe of rice cookies with two different amounts of Stevia rebaudiana leaf and grape seed oil, using a central composite design (CCD). In addition, mixing conditions of rice cookies were optimized by sensory evaluation and mechanical and physicochemical analysis using response surface methodology (RSM). RSM was used to obtain 10 experimental points (including two replicates of Stevia rebaudiana leaf and Grape seed oil), and the formulation of Stevia rebaudiana leaf added rice cookies was optimized using rheology. The results of mechanical and physicochemical analysis showed significant values for lightness, redness, yellowness, hardness, spread factor, loss rate, leavening rate, sweetness, moisture, pH, and density (P<0.001), results of the sensory evaluation showed significant values for color, flavor, taste, texture, appearance, and overall quality (P<0.05). As a results, optimal sensory ratio was found to be 1.98 g of Stevia rebaudiana leaf and 37.94 g of Grape seed oil.