• Korean Journal of Food Science and Technology
• /
• v.24 no.3
• /
• pp.240-246
• /
• 1992

Preparation of soybean oil fatty acid methyl esters (soybean oil FAME) through the transesterification of soybean oil with alkaline catalyst was optimized in terms of contents of residual free fatty acids (FFA) in soybean oil FAME and yield of soybean oil FAME due to the inhibitory effect of FFA on sucrose polyesters synthesis. Soybean oil FAME and residual FFA were analyzed quantitatively by simultaneous gas chromatography on a fused silica capillary column after converting the FFA in soybean oil FAME to tert.-butyldimethylsilyl (TBDMS) derivatives. Transesterification of soybean oil was successfully performed with alkaline catalyst (NaOH, 95%), which resulted in 99.1% yield of soybean oil FAME and less than 0.1% residual FFA contents under the conditions such as $30^{\circ}C$, 20min. and 6:1 molar ratio of anhydrous methanol to soybean oil.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.531-536
• /
• 2004

Synthesis conditions were optimized using response surface methodology for producing structured lipids (SL) by interesterification of DHA-enriched algae oil derived from microalgae, Schizochytrium sp. and corn oil. Reaction was performed fer 24 hr at $55^{\circ}C$ catalyzed by immobilized lipase from Rhizomucor miehei (RM IM) in shaking water bath. Major fatty acids of SL were palmitic (21.70 mol%), oleic (20.20 mol%), and linoleic (27.34 mol%) acids, and DHA (15.06 mol%). To separate newly synthesized SL-triglycerides (TG) species, HPLC with evaporative light scatting detector (ELSD) was used. Production conditions were optimized using central composite design with reaction temperature $(35-75^{\circ}C,\;X_1)$, reaction time $(2-42\;hr,\;X_2)$, and enzyme concentration $(2-14%,\;X_3)$ as variables. When variables were $70.28^{\circ}C\;(X_1),\;28.74\;hr\;(X_2),\;and\;11.30%\;(X_3)$, maximum content of selected three peaks of synthesized SL-TG species was predicted as 6.97 area%.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.767-772
• /
• 2006

In this study, we sought to produce a double layer microcapsule containing Lactobacillus sp. as the core material. The conditions for this microencapsulation process were optimized for the formation of a microcapsule with high storage stability. The effects of the ratio of[core material] to [wall material], the type and concentration of emulsifier used, the stirring rate(dispersibility) and the temperature of the dispersion fluid on the microencapsulation yield were studied. The optimal concentration and type of emulsifier required in order to allow for the stable formation of a W/O type emulsion (a primary process in double layer microencapsulation) were 1.00% (w/w) and polyglycerol polyricinileate (PGPR, HLB 0.6). However, the optimal concentration and type of emulsifier required to construct a W/O/W type emulsion (a secondary process in double layer microencapsulation), were 0.65% (w/w) and polyoxyethylene sorbitan monolaurate (PSML, HLB 16.7). Finally, we obtained a maximum yield of microencapsulation with a dispersion fluid stirring rate of 270rpm and a dispersion fluid temperature of 10$^{\circ}C$ after spraying a W/O/W type emulsion into the dispersion fluid.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1373-1381
• /
• 1999

이 논문에서는 통신망 설계 응용분야의 문제를 그래프 이론 문제로써 고려해 보았다. 개별 기업체가 서로 떨어진 두 곳을 연결하고자 할 때 공용통신망의 회선을 빌려 통신망을 구축하게 되는데 많은 경우 여러 종류의 회선들이 공급됨으로 어떤 회선을 선택하느냐의 문제가 생긴다. 일반적으로 빠른 회선(low delay)은 느린 회선(high delay)에 비해 비싸다. 그러나 서비스의 질(Quality of Service)이라는 요구사항이 종종 종단지연(end-to-end delay)시간에 의해 결정되므로, 무조건 낮은 가격의 회선만을 사용할 수는 없다. 결국 개별 기업체의 통신망을 위한 통로를 공용 통신망 위에 덮어씌워(overlaying) 구축하는 것의 여부는 두 개의 상반된 인자인 가격과 속도의 조절에 달려 있다. 따라서 일반적인 최소경로 찾기의 변형이라 할 수 있는 다음의 문제가 본 논문의 관심사이다. 두 개의 지점을 연결하는데 종단지연시간의 한계를 만족하면서 최소경비를 갖는 경로에 대한 해결을 위하여, 그래프 채색(coloring) 문제와 최단경로문제를 함께 포함하는 그래프 이론의 문제로 정형화시켜 살펴본다. 배낭문제로의 변환을 통해 이 문제는 {{{{NP-complete임을 증명하였고 {{{{O($\mid$E$\mid$D_0 )시간에 최적값을 주는 의사선형 알고리즘과O($\mid$E$\mid$)시간의 근사 알고리즘을 보였다. 특별한 경우에 대한 {{{{O($\mid$V$\mid$ + $\mid$E$\mid$)시간과 {{{{O($\mid$E$\mid$^2 + $\mid$E$\mid$$\mid$V$\mid$log$\mid$V$\mid$)시간 알고리즘을 보였으며 배낭 문제의 해결책과 유사한 그리디 휴리스틱(greedy heuristic) 알고리즘이 그물 구조(mesh) 그래프 상에서 좋은 결과를 보여주고 있음을 실험을 통해 확인해 보았다.Abstract This paper considers a graph-theoretic problem motivated by a telecommunication network optimization. When a private organization wishes to connect two sites by leasing physical lines from a public telecommunications network, it is often the cases that several categories of lines are available, at different costs. Typically a faster (low delay) lines costs more than a slower (high delay) line. However, low cost lines cannot be used exclusively because the Quality of Service (QoS) requirements often impose a bound on the end-to-end delay. Therefore, overlaying a path on the public network involves two diametrically opposing factors: cost and delay. The following variation of the standard shortest path problem is thus of interest: the shortest route between the two sites that meets a given bound on the end-to-end delay. For this problem we formulate a graph-theoretical problem that has both a shortest path component as well as coloring component. Interestingly, the problem could be formulated as a knapsack problem. We have shown that the general problem is NP-complete. The optimal polynomial-time algorithms for some special cases and one heuristic algorithm for the general problem are described.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• Journal of Plant Biotechnology
• /
• v.33 no.1
• /
• pp.49-56
• /
• 2006

Gerber (Gerbera hybrida) is a valuable ornamental species grown as a potted plant and cut flowers. However, genetic variability within the gerbera genus is very limited. So it is absolutely needed to introduce and widen genetic resources into gerbera lines by genetic transformation. For the purpose, 18 Korean gerbera lines were screened to establish Agrobacterium-mediated genetic transformation procedure. In an experiment to select Korean gerbera lines which are amenable to Agrobacterium-inoculation, 12 lines turned out to be positive in Agrobacterium-inoculation. More callus were produced from BA 2ppm, Zeatin 2ppm, IAA 0.2ppm in pre-culture and regeneration medium (2X media) but there was no difference in the frequency of GUS expression rate. In another experiment to find out optimal condition for highly efficient Agrobacterium-inoculation, petiole and leaf explants have been treated with four different pre-culture periods, two different co-culture periods and two different Agrobacterium strains. As a result, high GUS expression has been showed from petiole and leaf explants treated no pre-culture period with LBA4404 Agrobacterium tumerfaciens, 5 day co-culture period and dipping treatment.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.3
• /
• pp.177-189
• /
• 2014

When floor vibration problems occur in existing buildings, TMD (tuned mass damper) can be a viable alternative to resolving the problem. Only when TMD has been exactly tuned to the natural frequency of the floor, it can control the vibration as intended in design. However, TMD gets inefficient in the situation where the natural frequency changes as a result of the uncontrollable variation of the floor mass weight. This physical phenomenon is often called as TMD-off-tuning. This study proposes asymmetric TMD for enhancing the robustness of floor vibration control against uncertain natural frequencies. The proposed TMD features two asymmetric linear springs such that the floor vibrational energy can be dissipated through both the translational and rotational motion. An easy-to-use graphical optimization method was developed in this study. The asymmetric TMD proposed outperformed in vibration control by 28% compared to that of conventional TMD. The robustness of asymmetric TMD of this study was two times higher than that of conventional TMD.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.695-702
• /
• 2007

The Thermal Prestressing Method for continuous composite girder bridges is a new design and construction method developed to induce initial composite stresses in the concrete slab at negative bending regions. Due to the induced initial stresses, prevention of tensile cracks at the concrete slab, reduction of steel girder section, and reduction of reinforcing bars are possible. Thus, the construction efficiency can be improved and the construction can be made more economical. The method for determining the optimum heating region of the thermal prestressing method has not been established although such method is essential for improving the efficiency of the design process. The trial-and-error method used in previous studies is far from efficient, and a more rational method for computing optimal heating region is required. In this study, an efficient method for determining the optimum heating region in using the thermal prestressing method was developed based on the neural network algorithm, which is widely adopted to pattern recognition, optimization, diagnosis, and estimation problems in various fields. Back-propagation algorithm, commonly used as a learning algorithm in neural network problems, was used for the training of the neural network. Through case studies of two-span and three-span continuous composite girder bridges using the developed procedure, the optimal heating regions were obtained.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.81-91
• /
• 2005

The Traveling Salesman Problem(TSP) is one of the NP-complete (None-deterministic Polynomial time complete) route optimization problems. Its calculation time increases very rapidly as the number of nodes does. Therefore, the near optimum solution has been searched by heuristic algorithms rather than the real optimum has. This paper reviews the Ant System Algorithm(ANS), an heuristic algorithm of TSP and its applicability in the parcel delivery service in Korea. ASA, which is an heuristic algorithm of NP-complete has been studied by M. Dorigo in the early 1990. ASA finds the optimum route by the probabilistic method based on the cumulated pheromone on the links by ants. ASA has been known as one of the efficient heuristic algorithms in terms of its calculation time and result. Its applications have been expanded to vehicle routing problems, network management and highway alignment planning. The precise criteria for vehicle routing has not been set up in the parcel delivery service of Korea. Vehicle routing has been determined by the vehicle deriver himself or herself. In this paper the applicability of ASA to the parcel delivery service has been reviewed. When the driver s vehicle routing is assumed to follow the Nearest Neighbor Algorithm (NNA) with 20 nodes (pick-up and drop-off places) in $10Km{\times}10Km$ service area, his or her decision was compared with ASA's one. Also, ASA showed better results than NNA as the number of nodes increases from 10 to 200. If ASA is applied, the transport cost savings could be expected in the parcel delivery service in Korea.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.81-88
• /
• 2006

Laterally self-aligned InGaAs/GaAs quantum-dots (QDs) have been fabricated by using a multilayer stacking technique. For the growth optimization, we vary the number of stacks and the growth temperature in the ranges of 1-15 periods and $500-540^{\circ}C$. respectively, Atomic force microscope (AFM) images and photoluminescence (PL) spectra reveal that the lateral alignment of QDs is enhanced in extended length by an increased stack period, but severely degrades into film-like wires above a critical growth temperature. The morphological and the photoluminescence characteristics of laterally self-aligned InGaAs QDs have been analyzed through mutual comparisons among four samples with different parameters. An anisotropic arrangement develops with increasing number of stacks, and high-temperature capping allows isolated QDs to be spontaneously organized into a one-dimensionally aligned chain-like shape over a few ${\mu}m$, Moreover, the migration time allowed by growth interruption plays an additional important role in the chain arrangement of QDs. The QD chains capped at high temperature exhibit blue shifts in the emission energy, which may be attributed to a slight outdiffusion of In from the InGaAs QDs.