• Title/Summary/Keyword: Optimal weights,

Search Result 399, Processing Time 0.025 seconds

The Analysis of Assessment Factors for Offshore Wind Port Site Evaluation (해상풍력 전용항만 입지선정 평가항목에 관한 연구)

  • Ko, HyunJeung
    • Journal of Korea Port Economic Association
    • /
    • v.28 no.3
    • /
    • pp.27-44
    • /
    • 2012
  • The offshore wind farm is increasingly attractive as one of future energy sources all over the world. In addition, the capacity of an offshore wind turbine gets larger and its physical characteristics are big and heavy. In this regard, a special port is necessary to assemble, store, and transport the offshore wind systems, supporting to form the offshore wind farms. Thus, this study aims to provide a policy maker which evaluation factors can significantly affect to the optimal site selection of a offshore wind port. For this, Fuzzy-AHP method is applied to capture the relative weights. The results of this study can be summarized as follows. Five criteria in level I was defined such as the accumulation factor, the regional factor, the economic factor, the location factor, and the consortium factor. Of these, the accumulation factor(37.4%), the location factor(34.2%), and the economic factor( 24.5%) were analyzed by major factors. In level II, three assessment items of each factor were selected so that total fifteen items were formed. To sum up, the site selection of offshore wind port should consider the density of the wind industry, cargo volume of securing the economic operation of terminals, the development degree of offshore wind related industry, and the proximity to the offshore wind farms. In other words, the construction of offshore wind port should be paid attention to considering not only the proximity to offshore wind farms but also the preference of turbine manufacturing companies.

Streamflow Estimation using Coupled Stochastic and Neural Networks Model in the Parallel Reservoir Groups (추계학적모형과 신경망모형을 연계한 병렬저수지군의 유입량산정)

  • Kim, Sung-Won
    • Journal of Korea Water Resources Association
    • /
    • v.36 no.2
    • /
    • pp.195-209
    • /
    • 2003
  • Spatial-Stochastic Neural Networks Model(SSNNM) is used to estimate long-term streamflow in the parallel reservoir groups. SSNNM employs two kinds of backpropagation algorithms, based on LMBP and BFGS-QNBP separately. SSNNM has three layers, input, hidden, and output layer, in the structure and network configuration consists of 8-8-2 nodes one by one. Nodes in input layer are composed of streamflow, precipitation, pan evaporation, and temperature with the monthly average values collected from Andong and Imha reservoir. But some temporal differences apparently exist in their time series. For the SSNNM training procedure, the training sets in input layer are generated by the PARMA(1,1) stochastic model and they covers insufficient time series. Generated data series are used to train SSNNM and the model parameters, optimal connection weights and biases, are estimated during training procedure. They are applied to evaluate model validation using observed data sets. In this study, the new approaches give outstanding results by the comparison of statistical analysis and hydrographs in the model validation. SSNNM will help to manage and control water distribution and give basic data to develop long-term coupled operation system in parallel reservoir groups of the Upper Nakdong River.

Comparison of Biochemical Characterization of Korean and Chinese Mung Bean Lectin (한국산 녹두와 중국산 녹두에 있어서 Lectin의 생화학적 특성 비교)

  • Roh, Kwang Soo
    • Journal of Life Science
    • /
    • v.24 no.6
    • /
    • pp.603-611
    • /
    • 2014
  • The lectins were separated from Korean and Chinese mung bean seeds finally via chromatography using Sephadex G-100 and their biochemical features were studied and compared. They showed no hemagglutination with human red blood cells regardless of trypsin treatment and showed hemagglutination with only trypsin treated rabbit red blood cells. The molecular weights of two lectins were identified as 54 kDa and 28 kDa by SDS-PAGE. It was found that while the optimal reaction temperature of the lectin from Korean mung bean was $60^{\circ}C$, that of the lectin from Chinese mung bean seeds was $50^{\circ}C$. It was found also that the most thermal stable temperature of the seed lectin from Korean mung bean seeds was $50^{\circ}C$ and the lectin from Chinese mung bean was $40-50^{\circ}C$. The lectin from Korean mung bean seeds showed the highest activity at pH 3.2 and the lectin from Chinese mung bean showed the highest activity at pH 6.2. It was identified that when treating a denaturant, thiourea and guanidine-HCl resulted in no hemagglutination, so they induced denaturalization. It was identified also that there was no hemagglutination with urea, so it did not induced denaturalization. They showed no septicity to 6 types of carbohydrates including D-glucose. In addition, the lectins from the two mung bean seed had specificity to metal ions.

A study on the process optimization of microcellular foaming injection molded air-conditioner drain pen (화학적 초미세 발포 사출성형을 이용한 에어컨 드레인 펜의 공정 최적화에 대한 연구)

  • Kim, Joo-Kwon;Kwak, Jae-Seob;Kim, Jun-Min;Lee, Jun-Han;Kim, Jong-Sun
    • Design & Manufacturing
    • /
    • v.11 no.2
    • /
    • pp.1-8
    • /
    • 2017
  • In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.

Physiological Response of Chinese Cabbage to Salt Stress (염 스트레스에 대한 배추의 생리학적 반응)

  • Kim, Ju-Sung;Shim, Ie-Sung;Kim, Myong-Jo
    • Horticultural Science & Technology
    • /
    • v.28 no.3
    • /
    • pp.343-352
    • /
    • 2010
  • In order to understand the plant responses to salt stress (0, 50, and 100 mM NaCl), Chinese cabbage seedlings grown up to two leaf stages by hydroponic culture were used. Fresh and dry weight, chlorophyll (Chl), antioxidant materials, polyamine content, antioxidant enzyme activities, and inorganic ion level were evaluated. Fresh and dry weights of Chinese cabbage increased with the increase in salinity while the optimal growth occurred at 50 mM NaCl. The Chl a, total Chl, carotenoid content, and Chl a/b ratio increased by the 6 days after treatment with 100 mM NaCI; however, the Chl b content decreased. Glutathione increased in the root of Chinese cabbage for 6 days. Dehydroascorbate increased remarkably by day 6 caused by the salt stress in both leaf and the root. While ascorbate peroxidase increased, the activity of catalase and glutathione reductase decreased gradually in the first leaf for 6 days. The $Na^+$ content increased by 12.5-fold in the 3 days after treatment with 100 mM NaCI in the shoot, whereas the $Ca^{2+}$, $K^+$, and $Mg^{2+}$ content measured in the same treatment decreased by 43 to 57%. Spermidine content decreased as salinity increased, but spermine content increased. The growth promotion, glutathione and ascorbic acid content in Chinese cabbage were increased by low salt stress, and shortening of the cultivation period for growth increase of Chinese cabbage is expected.

Properties of Lower Molecular Weight of $\lambda$-Carrageenan Manufactured by Ultrasound (초음파에 의해 제조된 저분자 $\lambda$-carrageenan의 특성)

  • KIM Sang-Moo;PARK Seong-Min;CHOI Hyeon-Mee;LEE Keun-Tae
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.32 no.5
    • /
    • pp.607-611
    • /
    • 1999
  • Carrageenan are sulfated polymers containing galactose and anhydrogalctose units, and is used for its gelling, thickening, stabilizing, emulsifying, and suspending properties. However, carrageenan is limited to use beyond $0.03\%$ as food additives because of its high degree of gelling and viscosity with low solubility. The use of ultrasound significantly reduced the viscosity of $\lambda$-carrageenan solutions. The optimal parameters of ultrasound for reduction of carrageenan molecular weight were temperature, $10^{\circ}C$ ultrasound intensity, 114.7 $W/cm^2$ ; carrageenan concentration, $2\%$; treatment time, 10 min. The molecular weights of control, ultrasound peak 1, and peak 2 were approximately 250,000, 184,000, and 67,000 daltons, respectively. The lower molecular weight of $\lambda$-carrageenan showed the higher solubility, the lower alcohol precipitation ratio and the lower emulsifying capacity. Browning degree of both control and lower molecular $\lambda$-carrageenans was not significantly different.

  • PDF

Application of single-step genomic evaluation using social genetic effect model for growth in pig

  • Hong, Joon Ki;Kim, Young Sin;Cho, Kyu Ho;Lee, Deuk Hwan;Min, Ye Jin;Cho, Eun Seok
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.32 no.12
    • /
    • pp.1836-1843
    • /
    • 2019
  • Objective: Social genetic effects (SGE) are an important genetic component for growth, group productivity, and welfare in pigs. The present study was conducted to evaluate i) the feasibility of the single-step genomic best linear unbiased prediction (ssGBLUP) approach with the inclusion of SGE in the model in pigs, and ii) the changes in the contribution of heritable SGE to the phenotypic variance with different scaling ${\omega}$ constants for genomic relationships. Methods: The dataset included performance tested growth rate records (average daily gain) from 13,166 and 21,762 pigs Landrace (LR) and Yorkshire (YS), respectively. A total of 1,041 (LR) and 964 (YS) pigs were genotyped using the Illumina PorcineSNP60 v2 BeadChip panel. With the BLUPF90 software package, genetic parameters were estimated using a modified animal model for competitive traits. Giving a fixed weight to pedigree relationships (${\tau}:1$), several weights (${\omega}_{xx}$, 0.1 to 1.0; with a 0.1 interval) were scaled with the genomic relationship for best model fit with Akaike information criterion (AIC). Results: The genetic variances and total heritability estimates ($T^2$) were mostly higher with ssGBLUP than in the pedigree-based analysis. The model AIC value increased with any level of ${\omega}$ other than 0.6 and 0.5 in LR and YS, respectively, indicating the worse fit of those models. The theoretical accuracies of direct and social breeding value were increased by decreasing ${\omega}$ in both breeds, indicating the better accuracy of ${\omega}_{0.1}$ models. Therefore, the optimal values of ${\omega}$ to minimize AIC and to increase theoretical accuracy were 0.6 in LR and 0.5 in YS. Conclusion: In conclusion, single-step ssGBLUP model fitting SGE showed significant improvement in accuracy compared with the pedigree-based analysis method; therefore, it could be implemented in a pig population for genomic selection based on SGE, especially in South Korean populations, with appropriate further adjustment of tuning parameters for relationship matrices.

Optimum Condition of Peatmoss-Based Substrate for Growth of Red Pepper (Capsicum annuum L.) Plug Seedlings (피트모스 혼합상토를 이용한 고추 육묘용 최적 상토 개발)

  • Lee, Hyun-Haeng;Ha, Sang-Keon;Kim, Ho-Jin;Kim, Kye-Hoon
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.40 no.5
    • /
    • pp.392-399
    • /
    • 2007
  • This study was carried out to assess optimum conditions of peatmoss-based substrates for red pepper plug seedlings. Peatmoss-based substrates prepared by mixing of peatmoss with vermiculite, perlite, rice hull and zeolite at various mixing ratios were used for growing pepper plug seedlings. The physical and chemical properties of the peatmoss substrate were analyzed by the CEN(European committee for standardization) method. Fresh and dry weights (shoot, root), leaf area, root length and T/R ratio (dry shoot weight/dry root weight) were determined at 55 days after sowing. The results showed that the growing media PVSZ 6 (peatmoss:silver vermiculite: zeolite=6:3.9:0.1) and PVGZ 6 (peatmoss:gold vermiculite: zeolite=6:3.9:0.1) can successfully be used for red pepper plug seedlings judging from dry weight and T/R ratio of the plug seedlings. The optimal ranges of total pore space, water volume, air volume, easily available water content and water buffering capacity of the peatmoss based growing media for pepper plug seedlings were 87~93%, 52~71%, 20~41%, 10~37% and 0.6~10%, respectively.

Optimum Condition of the Coir-Based Substrate for Growth of Red Pepper (Capsicum annuum L.) Plug Seedlings (코이어 혼합상토를 이용한 고추 육묘용 최적 상토개발)

  • Lee, Hyun-Haeng;Ha, Sang-Keon;Kim, Kye-Hoon
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.40 no.5
    • /
    • pp.369-376
    • /
    • 2007
  • This experiment was carried out to investigate optimum conditions of coir-based substrates for the red pepper plug seedlings. Eleven different coir based substrates prepared by mixing of coir, vermiculite, rice hull, perlite, zeolite, mixed at different ratios were tested. The physical and chemical properties of the substrates were analyzed by the CEN (European committee for standardization) method. Fresh and dry weights of shoot and root, leaf area, root length, and T/R ratio (dry shoot weight/dry root weight) were determined at 55 days after sowing. The results showed that the growing media CRZ 8(coir:rice hull: vermiculite=8:1.9:0.1) and CVSZ 6(coir:silver vermiculite: zeolite=6:3.9:0.1) can successfully be used for pepper plug seedlings judging from dry weight and T/R ratio of the plug seedlings. The optimal range of total pore space, water volume, air volume, easily available water content and water buffering capacity of the coir-based growing substrates for pepper plug seedlings were in the range of 92~94%, 52~60%, 32~43%, 18~21%, and 0.9~8%, respectively.

A Study on the Optimal Location Estimation of Highway Shelter Considering the Driving Duration of Individual Vehicles (개별차량의 운전지속시간을 고려한 고속도로 휴게시설의 적정위치 선정방법 연구)

  • Cho, Hwang young;Lee, Sang jo
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.18 no.4
    • /
    • pp.16-30
    • /
    • 2019
  • In this study, we calculated the driving duration of individual vehicles according to the availability of rest facility on highway, and suggested indicators indicating the potential risk of accidents caused by long-term driving with weights based on the number of vehicles by driving duration of individual links. Based on this, the methodology for estimating the appropriate location of the highway rest facility considering the driving duration of individual vehicles was presented. Using the DSRC individual vehicle data collected from the highways, the appropriate location of the rest facility was calculated by considering the driving duration by classifying weekdays and weekends for the Gyeongbu Expressway. The results showed that the weekly and weekend high risk indicators were different. In the case of weekdays, the risk indicators of Gimchun JC to Kumho JC for Busan were high, while for weekends, the risk indicators of Ansung JC to Dongtan JC for Seoul and Ansung IC to Bukchunan IC for Busan were high. This study has great significance in that it provides a framework for detailed analysis of link units by using non-aggregated data of individual vehicle units. In addition, it is significant that the reasonable driving duration reflecting the behavior of individual vehicles was calculated by analyzing the use of rest facilities.