In order to know the effects of rearing conditions such as water temperature, salinity, larval stocking density, kinds and amounts of food organism and seedling collection method on seedling production of the brackish water clam, Corbicula japonica, the growth and survival rate of the larvae were investigated at each rearing condition. The shell length of larvae showed faster growth at $24^{\circ}C$ and $27^{\circ}C$, and survival rate showed good results at $18^{\circ}C$ and $21^{\circ}C$. Based on growth and survival rate according to water temperature, the optimal water temperature for larvae rearing was $24^{\circ}C$. At the salinity of more than 3 psu, the growth and survival rate were higher than 0 psu. The optimal salinities for larvae were 6-9 psu. Growth and survival rate of larvae were high at low stocking density and the optimum stocking density of larvae was 10 inds./ml. Daily feeding concentrations of 10,000-20,000 cell/ml of food organisms mixed Pavolva lutheri, Isochrysis galbana and Chaetoceros calcitrans were very effective. Full grown larvae collection from various substratum was significantly higt in sand, especially sand size was less than 0.25 mm.
This study was conducted to establish the optimal suspension culture system for both the propagation of embryogenic cells (ECs) and the induction of somatic embryos (SEs) of Kalopanax septemlobus. The proliferation rate of ECs was reduced as the inoculum density was increased; the highest rate was obtained when 0.1 g/100 ml of cells was initially inoculated. According to the analysis of cell growth pattern and cell growth cycle (G1, Sand G2/M), the cell growth started in 5 days culture initiation, grew rapidly until 15 days and then decreased gradually. Distinctive changes of the cell growth cycle by the culture periods was also observed; the growth cycle was doubled from initial 5.6% to 11.7% of S stage in 5 days culture and then reached in stable stages again. Therefore, the results indicated that a 15-day-cycle was the optimal culture period for the propagation of the ECs through the suspension culture. Furthermore, the cell inoculum density was also important for the induction of SE; more than 65% of SEs at the torpedo stage was induced by using the low level of cell inoculum (0.5 g/L), while the higher inoculum densities were rapidly reduced the proportion of SEs at that stage. Although the higher inoculum density delayed the development of SE, it did not affect the proportion of SEs at the globular and heart stage. In conclusion, this study showed that the suspension culture of the Kalopanax septemlobus ECs through the control of inoculum density was an efficient way for both the propagation of ECs and the induction of SEs, suggesting that the development of this system might help to reduce the culture period for the somatic embryo production.
Proceedings of the Plant Resources Society of Korea Conference
/
2010.05a
/
pp.17-17
/
2010
Ethylene, known as a stress hormone regulate wide developmental processes including germination, root hair initiation, root and shoot primordial formation and elongation, leaf and flower senescence and abscission, fruit ripening. The acceleration of ethylene biosynthesis in plant associated with environmental and biological stresses. 1-Aminocycloprophane-1-carboxlyate deaminase(ACCD) is an enzyme that cleaves ACC into and ammonia, a precursor of the plant hormone ethylene. Plant growth-promoting rhizobacteria (PGPR) having ACCD can decrease endogenous ACC level of tissue, resulting in reduced production of ethylene in plants. ACC deaminse was a key enzyme for protect stressed plants from injurious effects of ethylene. ACCD gene was encoded from Pseudomonas flourescens, PGPR and was cloned in Escherichia coli. We expressed the recombinant ACCD(rACCD) containing 357 amino acids with molecular weight 39 kDa that revealed by SDS-PAGE and western blot. The rACCD was purified by Ni-NTA purification system. The active form of rACCD having enzyme activity converted ACC to a-ketobutyrate. The optimal pH for ACC deaminase activity was pH 8.5, but no activity below pH 7.0 and a less severe tapering activity at base condition resulting in loss of activity at over pH 11. The optimal temperature of the enzyme was $30^{\circ}$ and a slightly less severe tapering activity at 15 - 30$^{\circ}$, but no activity over $35^{\circ}$. P. flourescens ACC deaminase has a highly conserved residue that plays in allowing substrate accessibility to the active sites. The enzymatic properties of this rACCD will provide an important reference for analysis of newly isolated ACCD and identification of newly isolated PGPR containing ACCD.
Journal of Advanced Marine Engineering and Technology
/
v.11
no.2
/
pp.71-81
/
1987
Nowadays, the high development of industrial technique demands the optimal design of marine structures to be welded under the water, because the underwater welding of the ship hull and marine structures can decrease manpower and cost of production. However there is not available at present any report on fatigue behavior about underwater welded joints. In this paper under tention- tension repeated fatigue stress with frequency of 10 cycles per second by local controlled system, the fatigue strength properties of underwater welded joints of SM41A-2 Plate-to-Plate of 10 mm thickness were experimentally examined. The results obtained were as follows : 1) The fatigue strength of underwater welded joints of SM41A-2 was peaked at the heat input of about 1, 400 joule/mm(180 A, 36 V), while, at the heat input of more than about 1, 100 joule/mm (160 A, 33 V) that of the underwater welds at the higher than cycle of life rather than the lower cycle was higher than that of the base metal but lower than that of the atmosphere welds on account of both cooling and notch effects. 2) The fatigue limit of underwater welds increased with an increase of heat input resulting in a peak of that at the heat input of about 1, 400 joule/mm and then decreased gradually. 3) The fatigue strength at N cycles was peaked between the heat input of about 1, 400 and 1, 700 joule/mm where the strain was rapidly increased. 4) It was confirmed that the optimal zone of heat input condition for obtaining the underwater welds fatigue strength higher than that of the base metal exists, and if out of this zone, the fatigue strength of the underwater welds was lower than that of the base metal because of lack weld penetration, inclusion of slag, voids, etc. 5) By the fatigue test, the underwater welds fractured brittly without visual deformation, so the strain was remarkably less than of the atmosphere welds. 6) The fatigue life factor was peaked at the heat input of about 1, 600 joule/mm (200 A, 36 V) at which the mean strain is a little higher than that of the base metal but quite lower than those of the atmosphere welds, resulting in good underwater welds because both fatigue strength and ductility of the underwater welds are higher than those of the base metal at such heat input.
Transactions of the Korean Society of Mechanical Engineers A
/
v.25
no.9
/
pp.1438-1443
/
2001
The significance of the casting/forging process for reducing the production cost of large components is being noted in these days. This casting/forging process is a method of forging a workpiece preformed by casting into the final shape. In this study, the casting/forging process has been applied in manufacturing a large aluminum flange in order to reduce press capacity and material cost. Firstly, a hot compression test was performed with cast cylindrical billets in order to determine the optimum forging condition of the aluminum flange. The optimum range of forging temperature of Al 5083 was from 420$\^{C}$ to 450$\^{C}$. The suitable strain rate was 1.5 sec(sup)-1. The deformation amount of a preform of a preform in a forging process is a key role in the mechanical properties of casting/forging products. In order to find the change of mechanical properties according to effective stain of cast aluminum billets, a hot upsetting test were performed with rectangular blocks and then a uniaxial tensile test was performed with specimens cut from the upsetted billets. The tensile strength and the elongation of cast/upsetted aluminum billets were increased largely until the effective strain was 0.7. FE analysis was performed to determine the configurations of case preform and die for an aluminum flange. In the FE analysis, the forging load-limit was fixed 1500ton for low equipment cost. The cast preform was designed so that the effective stain around the neck of a flange exceeded 0.7. From the result of FE analysis, optimal configurations of the cast preform and the die were designed for a large flange. The filling and solidification analysis for a sound cast-preform was carried out with MAGMA soft. In the forging experiment for an aluminum flange, it was confirmed that the optimal configuration of the cast preform predicted by FE analysis was very useful. The cast/forged products using designed preform were made perfectly without any defects.
The offshore trawl fishery is seeking its survival way to overcome current management conditions in red, resulted from the bilateral agreement with China and Japan. However, this movement magnifies conflicts between fisheries on the contrary and it is thought to be impossible to get over current situations. For all that, this study is aimed at investigating how this current situations have occurred. The management freedom as response to the change in fishing conditions of a certain fishery, in case of Korea, is affected by institutional regulations. The example of this is controls on fishing gears, fishing vessels, and fishing grounds. The most exposure of this control is a segmentation of institutional fisheries. The initial segmentation of the offshore trawl fishery in Korea was occurred in the period of Japan's colonization when the degree of use of fishing grounds was limited geographically. At that time, fisheries were divided by fishing areas, but it did not divide the fishery itself. The large - sized fishing vessels were developed politically to be more competative to Japanese fishing vessels since 1950s. During this time, the trawl fishery was merged into current Eastern trawl fishery and South - Western trawl fishery. It was also inevitable to divide into the pair trawl and single trawl fishery as a result of the physical mergency between Western trawl and Southern trawl fishery. In order to develop the trawl fishery, new licenses were issued on the shrimp trawl fishery, through which it was expected to boost the trawl fishery. As opposed, the shrimp trawl fishery was changed into the mid - sized trawl fishery, targeting on the eastern fishing areas and the large - sized trawl fishery was developed since the late of 1970s with the development of filefish processing industry. The large trawl fishery that led in development of offshore trawl fishery since the late of 1950s was started to divide into a pair trawl and single trawl according to the fishing method and capital power. It finally became an institutionally independent fishery in 1980s, respectively. Looking into these historical process, the segmentation of the trawl fishery is thought as a result of the lack of long - term perspective and as a production of trial and error resulted by unprepared policy. As a result, these segmentation of fisheries roles as critical obstacles in harmonization of fisheries and in overcoming of current situations. Therefore, the review of this institutional segmentation of the offshore trawl fishery should be taken for an optimal redistribution of fishing grounds suits with business and fishing technology. For this, the fishery must be divided into large capitalized fishery and small - mid fishery with consideration of capital, fishing method, and the condition of use of fishing grounds. In addition to this, by limiting outline of fishing ground that the large fishery can harvest, it must allow for the small - mid fishery to catch with its own boundary. Furthermore, by launching buyback programs on the trawl, eastern trawl, pair trawl, it can provide broader fishing grounds where the fishery can harvest with management freedom.
The conservation project to protect an endangered fish, Gobiobotia naktongensis was executed against declining the gene diversity of the fish after the construction of Youngju Dam in a sand-bed stream (Naeseongcheon Stream). We tried to move the populations of G. naktongensis from submerged planned sites to alternative habitats, bred artificially and augmented the juveniles to optimal habitat, and monitored the results of the restoration implementation. No entity of G. naktongensis was confirmed at the planned submerged sites despite attempting to capture more than 8 times and eventually the movement to alternative habitat could not be implemented. About 40 individuals of G. naktongensis were captured in the Naeseongcheon Stream and a total of 5,000 individuals were artificially spawned up. The population of juvenile inherited the genetic diversity from the brood stock. The bred juveniles were discharged at the selected optimal site that had a habit condition what was similar to their natural habitat. The micro-dispersion around the discharging area was found at the early stages of the augmentation. The re-capturing rate of discharged juveniles was reduced as time passed. The discharged juveniles seemed to adapt to the natural environment of Naeseongcheon Stream. The observation of their high abdominal distension and excrement demonstrated that the juveniles fed successfully in the discharging area. Therefore, securement of genetic homogeneity and enhancement of restoration population of G. naktongensis in upstream and downstream of Youngju Dam site from the artificial seed producing seemed to be primarily successful and long-term monitoring and analysis of the effect was expected to be necessary.
Cordyceps and its allies fungi has been described as a secret medicine that gives eternal youth and a long life. Some species of Cordyceps are sources of biochemicals, such ascordycepin, with interesting biological and pharmacological properties. Hence, it has been studied to uncover its pharmacological effect. We attempted to study the formation of fruiting bodies and to develop means of mass production Korean isolate of Paecilomyces tenuipes has been inoculated into silkworms, where it reproduced using culture container, mini-kit successfully. Culture container, mini-kit is composed of a cylinder-shaped body and lid. The container is made of translucent polyethylene terephthalate. The size of the container is $82{\times}75mm$, reduced by 10 times as compared with the conventional culture kit. The mini kit has many advantages - high culture amount, ability of maintaining optimal humidity, parasite-free cultivation and high-end appearance. With the kit, the optimal cultivation condition is under $22^{\circ}C$, culture period of 53 days. And synnemata of P. tenuipes could be kept fresh for 14 days at the temperature of under $10^{\circ}C$. Therefore, the Min-kit can be used in both ways as a culture container and a packing kit for end-user customers.
To effectively isolate acetic acid bacteria for producing makgeolli vinegar, various products were researched, and Acetobacter pasteurianus CK-1, a strain that is excellent in acetic acid production, was finally isolated. The optimal growth temperature of the isolated strain was confirmed to be 30℃, and it grew well in the pH range of 5.5~6.5, with optimal growth at pH 6. A. pasteurianus CK-1 had the most active proliferation when the initial ethanol concentration in the medium was 4%, and growth was possible even at an ethanol concentration of 7%. When inoculating the isolated strain into makgeolli to induce acetic acid fermentation, the pH at the beginning of fermentation was 3.54, which was gradually lowered to 2.77 after 18 days of fermentation. The acidity was 0.75% at the beginning of fermentation and gradually started to increase from the 4th day of fermentation. The final acidity at the end of fermentation was 5.54%. In the vinegar fermented by inoculating A. pasteurianus CK-1, acetic acid content was detected to be as high as 3,575.7±48.6 mg%, and the malic acid and citric acid contents were 2,150.8±27.6 and 55.8±3.7 mg%, respectively. Further, it was confirmed that the content and ratio of the organic acids produced significantly differed depending on the type of inoculated bacterial strain. During acetic acid fermentation, the populations of yeast and A. pasteurianus CK-1 were inversely changed. In the initial stage of fermentation, yeast dominated, and after 10 days of fermentation, A. pasteurianus CK-1 slowly proliferated and reached stationary phase.
Effect of culture conditions such as pH, temperature, agitation speed and oxygen transfer rate on xylitol production from xylose by Candide parapsilosis ATCC 21019 mutant was investigated in a jar fermentor. The initial concentration of xylosr was fixed at 50 g/l in this experiment. When pH was increased, cell growth and xylose consumption rate were increased, but maximum xylitol production was shown in the range of pH 4.5 and 5.5 with a yield of 0.68 g/g-xylose. The optimal temperature for xylitol production was determined to be $30^{\circ}C$. Considering the importance of dissolved oxygen tension, for xylitol production, the effect of oxygen transfer rate coefficient $(k_La)$ on fermentation parameters was carefully evaluated in the range of $20{\sim}85\;hr{-1}\;of\;k_La$ (corresponding to $100{\sim}300$rpm of agitation speed). The xylitol production was maximized at $30\;hr^{-1}\;of\;k_La$(150 rpm). A higher oxygen transfer rate supported better cell growth with lower xylitol yield. It was determined that maximum xylitol concentration, xylitol yield and productivity was 35.8 g/l, 71.6% and $0.58\;g/l{\sim}hr^{-1}$, respectively, at $30\;hr^{-1}\;of\;k_La$ In order to further increase xylitol productivity, ferementation using the concentrated biomass(20 g/l) was carried out at the conditions of pH 4.5, $30^{\circ}C$ and $30\;hr\;1$ of oxygen transfer rate. The final xylitol concentration of 40 g/l was obtained at 18 hours of culture time. From this result, it was calculated that xylitol yield was 80ft on the basis of xylose consumption and volumetric productivity was $2.22\;g/l{\sim}hr$ which was increased by $3{\sim}4$ fold compared with $0.5{\sim}0.7\;g/l-hr$ obtained in a normal fermentation condition.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.