• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.3
• /
• pp.137-145
• /
• 2014

We present a design sensitivity analysis(DSA) method for multiscale problems based on bridging scale decomposition. In this paper, we utilize a bridging scale method for the coupled system analysis. Since the analysis of full MD systems requires huge amount of computational costs, a coupled system of MD-level and continuum-level simulation is usually preferred. The information exchange between the MD and continuum levels is taken place at the MD-continuum boundary. In the bridging scale method, a generalized Langevin equation(GLE) is introduced for the reduced MD system and the GLE force using a time history kernel is applied at the boundary atoms in the MD system. Therefore, we can separately analyze the MD and continuum level simulations, which can accelerate the computing process. Once the simulation of coupled problems is successful, the need for the DSA is naturally arising for the optimization of macro-scale design, where the macro scale performance of the system is maximized considering the micro scale effects. The finite difference sensitivity is impractical for the gradient based optimization of large scale problems due to the restriction of computing costs but the analytical sensitivity for the coupled system is always accurate. In this study, we derive the analytical design sensitivity to verify the accuracy and applicability to the design optimization of the coupled system.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.35-45
• /
• 2009

Emergency medical center(EMC) is the place for patients who need medical treatment immediately due to a disease, childbirth, or all sorts of accidents. Currently, most of EMCs use temporary beds because regular EMC beds cannot afford to serve all incoming patients. However, since it decreases the quality of service(QoS) of EMC patients and their guardians and efficiency of the EMC, some improvements are highly required to diminish the usage of temporary beds. The system duration time is one of the typical QoSs. This thesis proposes the information which is critical to make a better decision for cut down the number of temporary beds without sacrificing QoS of patients. The key point is to control the duration time of medical treatments for the consultation and hospitalization process, since it is the major reason of overcrowding in EMC and the usage of temporary beds. In this paper, we proposed an Arena simulation model reflecting real world substantially. Arena is one of the most widely accepted simulation softwares in the world. Using the developed model, we can obtain the optimal EMC operation parameters through simulation experiments. Optquest, included in the Arena, is used to make the developed simulation model collaborate with an optimization model. The results showed one can determine the set of optimal operation parameters decreasing the required number of temporary beds without deteriorating EMC patient's QoS.

• International Journal of Advanced Culture Technology
• /
• v.5 no.1
• /
• pp.58-63
• /
• 2017

Emergencies and disasters can happen any time without any warning, and things can change and escalate very quickly, and often it is swift and decisive actions that make all the difference. It is a responsibility of the building facility management to ensure that a proven evacuation plan in place to cover various worst scenario to handled automatically inside the facility. To mapping out optimal safe escape routes is a straightforward undertaking, but does not necessarily guarantee residents the highest level of protection. The emergency evacuation navigation approach is a state-of-the-art that designed to evacuate human livings during an emergencies based on real-time decisions using live sensory data with pre-defined optimum path finding algorithm. The poor decision on causalities and guidance may apparently end the evacuation process and cannot then be remedied. This paper propose a cloud connected emergency evacuation system model to react dynamically to changes in the environment in emergency for safest emergency evacuation using IoT based emergency exit sign system. In the previous researches shows that the performance of optimal routing algorithms for evacuation purposes are more sensitive to the initial distribution of evacuees, the occupancy levels, and the type and level of emergency situations. The heuristic-based evacuees routing algorithms have a problem with the choice of certain parameters which causes evacuation process in real-time. Therefore, this paper proposes an evacuee routing algorithm that optimizes evacuation by making using high computational power of cloud servers. The proposed algorithm is evaluated via a cloud-based simulator with different "simulated casualties" are then re-routed using a Dijkstra's algorithm to obtain new safe emergency evacuation paths against guiding evacuees with a predetermined routing algorithm for them to emergency exits. The performance of proposed approach can be iterated as long as corrective action is still possible and give safe evacuation paths and dynamically configure the emergency exit signs to react for real-time instantaneous safe evacuation guidance.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.83-90
• /
• 2022

A forecast foresight of the conditions for the development of educational affairs in the Information Society of Ukraine is presented, taking into account changes in the technique, technologies, and the socio-social sphere. Unresolved problems in Ukraine regarding the modernization and improvement of the education system by means of informatization are highlighted. The need for further improvement of Ukrainian education by means of informatization is noted. Formulated the main goal of future education. The necessary conditions for the successful development of future education are highlighted. The role and place of the key figure of the teacher in the education of the future is determined. The article highlights the theoretical and philosophical foundations of professional subjectivity of the future specialist. Recently, the world's pedagogical thought has increasingly focused on how to build an educational process so that it brings a sense of happiness to all its participants. It is believed that this is a new management philosophy in general, although its origins are in ancient Greek sources, which claim that only a happy life has meaning and value. It is found out that the professional subjectivity of a specialist is an important professionally significant quality of the individual, which provides a purposeful and optimal implementation of their mental, personal resources for solving professional and life problems, which is manifested in the desire for self-definition, self-determination, self-regulation and self-improvement in professional activities taking into account the information society. The structure of this phenomenon is shown.

• The Journal of Information Systems
• /
• v.11 no.1
• /
• pp.51-74
• /
• 2002

The purpose of this study is to empirically investigate critical success factors for effective implementation of web-based distance learning system. First of all, four critical success factors are theoretically derived from reviewing previous research. They are: (1) learner-related factor including the variables such as teaming ability, learning attitude, and attending motivation, (2) environmental factor including the variables of physical and mental support for learners, (3) instructional design factor represented by one variable, the degree of appropriateness of learning contents, and (4) the factor concerning the level of self-directed learning readiness embracing the variables such as curiosity for learning, openness towards challenge of learning and affection for learning. Subsequently, the relationships between these four critical success factors and the degree of learning satisfaction are empirically investigated. The data for empirical analysis of the research are collected from 1,020 respondents who have already passed the web-based distance learning courses which have been implemented in Information and Communication Officials Training Institute. Out of 1,020 responded questionnaires, 875 data were available for statistical analyses. The main results of this study are as follows. Firstly, the most important factor for successful implementation of the web-based distance learning system is shown to be the instructional design factor, and in the next place, the self-directed learning readiness factor, the environmental factor and the learner-related one in sequence. Secondly, additional analysis of the variables included in the instructional design factor shows that availability of practical information and knowledge is the most influencing variable, and next, interesting composition of contents, reasonable learning amount, optimal level of instruction, and understandable explanation are significantly important in the descending order. Lastly, among learning motivators, strong intention of acquiring business knowledges and skills is found to be the most important satisfier in the web-based distance learning. The theoretical contribution of this study is to derive a comprehensive model of critical success factors for implementing the web-based distance learning system. And, the practical implication of this study is to propose efficient and effective guidelines for developing and operating the web-based distance learning system in the various kinds of organizations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.6
• /
• pp.881-890
• /
• 2019

Objective: A study was conducted to develop non-dairy creamer analogs/mimics using egg white, egg yolk, soy protein and their combinations, and their nutrient content, shelf-life and flavor acceptability were compared. Methods: Spray dried egg white, egg yolk, and soy protein isolate were purchased from manufacturers and used for the formulae. Results: The protein contents of the non-dairy creamer analogs/mimics were about 8.5% as calculated. The amounts of oleic and linoleic acid content increased as the amount of yolk increased in the formula, but the increases of polyunsaturated fatty acids were <0.5% of total fat. Addition of egg yolk to the formula increased choline and lutein content in the products, but the amounts were <0.4 mg/g for choline and $4{\mu}g/g$ for lutein. The lutein in the products continued to decrease over the storage time, and only about 15% to 20% of the 0-month amounts were left after 3 months of storage. Although the thiobarbituric acid reactive substances values of the spray-dried non-dairy creamer analogs/mimics increased as storage time increased, the values were still low. Yellowness, darkness, and egg flavor/odor of the non-dairy creamer analogs/mimics increased as the amount of egg yolk in the formula increased. The overall acceptability of the non-dairy creamer analogs/mimics was closely related to the intensity of egg flavor/odor, but storage improved their overall acceptance because most of the off-odor volatiles disappeared during the storage. Water temperature was the most important parameter in dissolving spray-dried non-dairy creamer analogs/mimics, and $55^{\circ}C$ to $75^{\circ}C$ was the optimal water temperature conditions to dissolve them. Conclusion: Higher amounts of yolk and soy protein combinations in place of egg white reduced the cost of the products significantly and those products contained better and balanced nutrients than the commercial coffee creamers. However, off-flavor and solubility were two important issues in the products.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.913-922
• /
• 1987

In this paper the solidification phenomena at the molten pool has been modeled and simulated in terms with the one dimensional unsteady-state heat transfer of the solid and molten phase and the pressure distribution in the solid phase for the twin-roller continuous casting of Sn-15% Pb. The further purpose of this study was to effectively analyze the thermal and mechanical deformation of roll applying the results of the heat transfer and the pressure distribution to the boundary conditions. The strip thickness of rapidly solidified metallic strip decreases with increasing angular velocity of the roller and with increasing initial roll gap. For this reason the roll spacing and angular velocity of the rolls are considered to be main variables. The recommended optimal casting regimes for continuous strip dimensions is near 0.8mm-1.0mm in thickness at the given angular velocity .omega.=2.0 rad/sec. Results of the experiment using Sn-15% Pb are compared with model predictions. The calculated roll deformation has been in good agreement with the observed value of roll deformatiion. All the deformation. All the deformation of the roller is within the elastic range, the plastic yielding are not occured. However, these elastic stresses are sufficient to take place of the shortened roller life by the thermal fatigue and a notch fatigue. The higher cooling rates were obtained by a twin-roller quenching technique. Also the quenched microstructure of the rapidly solidified shell was verified.

• Journal of Ginseng Research
• /
• v.14 no.2
• /
• pp.297-309
• /
• 1990

Ginseng is renowned for both its medicinal and herbal uses and successful cultivation of Panax ginseng in Asia and Panax Vtiinvtiefolilim in North America has until recently taken place in the native geographical ranges of the plants. As a consequence of the potential high capital return and anticipated increases in consumer consumption, commercial cultivation of American ginseng now occurs well outside the native range of the plant in North America. In fact, the region of greatest expansion of cultivation is in the semi-arid interior region of British Columbia, Canada. Linked with this expansion is the potential domination of the ginseng industry by agricultural corporations. In the interior of British Columbia, the native decidous forest environment of eastern North America is simulated with elevated polypropylene shade and a sllrface covering of straw mulch. The architecture of these environments is designed to permit maximillm machinery useage and to minimize labour requirements. Further, with only a four-year growth cycle, plant densities in the gardens are high. In this hot, semiarid environment, producers believe they have a competitive advantage over other regions in North America because of the low precipitation rates. This helps to minimize atmospheric humidity such that the conditions for fungal disease development are reduced. If soil moisture levels become limited, supplemental water can be provided by irrigation. The nature of the radiation and energy balance regimes of the shade and much environment promotes high soil moistilre levels. Also, the modified environment reduces soil heating. This can result in an aerial environment for the plant that is stressful and a rooting zone environment that is sub-optimal. The challenge of further refining the man modified environment for enhanced plant growth and health still remains.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.822-831
• /
• 2000

Application of omija(Schizndra chinensis Baillon) to improve the quality and preservation of nabka kimchi was attempted and the optimal amount of omija level and its effect on the sensory and microbiological properties of nab마 kimchi during fermentation were examined. Effects of omija juice which had been prepared by extracting omija seeds for 9 hr at room temperature (22.5$\pm$0.5$^{\circ}C$) with different ratios (0.5, 1.0, 1.5, 2.0%;w/v) of water were examined against control (kimchi prepared without omija). Organoleptic and microbiological properties of nabak kimchi were measured up to 25 days at 1$0^{\circ}C$ after preparation. Sensory properties were evaluated in the aspects of both acceptability and intensity characteristics. In whole, 0.5 and 1.0% treatments showed higher values of evaluation, compared to control, 1.5, and 2.0% treatments throughout the fermentation period. As fermentation progresses, however, sample of 1.0% treatment ranked first between day 4 to 7 and also so did sample of 0.5% treatment along with 1.0% treatment from behind day 10. As for color, control, 0.5% treatment, and 1.0% treatment were more favored than rest of the samples. In texture, 2.0% treatment showed the highest values, whereas control was rated the lowest. In the intensity of characteristics 1.5% and 2.0% treatments showed higher values except sweet taste in which 1.0% treatment ranked top during the initial 7 days and then 0.5% treatment took the first place at behind day 10. total cell counts and number of lactic acid bacteria were gradually increased and then decreased showing the maximum levels of microbial counts on different days, to say, day 2 for control and 0.5% treatment nd day 7 for 1.0, 1.5 and 2.0% treatments. The application of omija juice in nabak kimchi enhanced eating qualities of the fermented product and the fermentation-retarding effect of omija juice was clearly shown during the initial seven days of fermentation. The optimum levels of omija juice in nabak kimchi obtained through experiments were between 0.5 to 1.0% for color, fermentation-retarding effects, and savory taste of the product.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.4
• /
• pp.185-189
• /
• 2008

Objective : The authors present their experiences with stereotactic multiplanar reformatted (MPR) computed tomography (CT)-guided catheter placement for thrombolysis of spontaneous intracerebral hematoma (sICH) and their clinical results. Methods : In 23 patients with sICH, MPR CT-guided catheter placement was used to select the trajectory and target point of hematoma drainage. This group was comprised of 11 men and 12 women, and the mean age was 57.5 years (range, 31-79 years). The patients' initial Glasgow Coma Scale scores ranged from 7 to 15 with a median of 11. The volume of the hematoma ranged from 24 mL to 86 mL (mean 44.5 mL). A trajectory along the main axis of the hematoma was considered to be optimal for thrombolytic therapy. The trajectory was calculated from the point of entry through the target point of the hematoma using reformatted images. Results : The hematoma catheter was left in place for a median duration of 48.9 hours (range 34 to 62 hours). In an average of two days, the average residual hematoma volume was 6.2 mL (range 1.4 mL to 10.2 mL) and was reduced by an average of 84.7% (range 71.6% to 96.3%). The residual hematoma at postoperative seven days was less than 5 mL in all patients. There was no treatment-related death during hospitalization. Conclusion : The present study indicates that stereotactic MPR CT-guided catheter placement for thrombolysis is an accurate and safe procedure. We suggest that this procedure for stereotactic removal of sICH should be considered for the optimization of the trajectory selection in the future.