• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.1
• /
• pp.5-11
• /
• 2002

Active vibration control of intelligent laminated composite plates is performed experimental1y Laminated composite place is modeled by the system identification method. For the system identification process, the laminated composite place is excited by two piezoelectric actuators with PRBS signals. At the same time, the displacement of the laminated composite plate is measured by a gap sensor. From these excited PRBS signals and the measured displacement sequence, system parameters of the laminated composite plate are estimated using a recursive prediction error method. Model of the laminated composite plate with two piezoeletric actuators is assumed to be the form of ARMAX. From the estimated ARHMAX model, a state space equation of the observable canonical form is obtained. With this state space equation, a controller and an observer for active vibration control is designed using the optimal control method. Controller and observer are implemented on a digital system. Experiments on the vibration control are Performed with changing the outer layer fiber orientation of intelligent composite plates.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.376-379
• /
• 1996

Synthesis for qualitative analysis in connection with quantitative analysis from the pinch design method, EVOP and Operations Research is proposed for the optimal synthesis of heat exchanger networks, that is through of the transportation model of the linear programming for synthesizing chemical processing systems, to determine the location of pinch points, the stream matches and the corresponding heat flowrate exchanged at each match. In the second place, according to the optimization, the optimal design of heat transfer enhancement is carried on a fixed optimum heat exchanger network structure, in which this design determines optimal operational parameters and the chosen type of heat exchangers as well. Finally, the method of this paper is applied to the study of the optimal synthetic design of heat exchanger network of constant-decompress distillation plants.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.112-117
• /
• 1997

This paper presents a GA(Genetic Algorithms)-Optical control strategy for the control of the swing motion and the transverse position of the overhead crane. The overhead crane system is defined uncertain due to unknown system parameters such as payload and trolly mass. To control the overhead crane. the GA-Optimal control scheme is suggested. which transfers a trolly to a desired place as fast as possible and minimizes the swing of the payload during the transfer. The genetic algorithms are applied to fine digital optimal feedback gains. A computer simulation demonstrate the performance of the proposed the GA-digital optimal controller for the overhead crane.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.4
• /
• pp.301-305
• /
• 2004

In a warehouse, plates listed in the different orders are placed mixed. Nevertheless, when plates are going out, a group of plates listed in the same order should be sequentially loaded on a transporter. Since the access to the plates is only from the top of the stack, it happens often that we have to move some plates on a temporary place in order to access a plate below them. This paper deals with a problem of sequencing orders for transportation to minimize the number of plates temporarily moved.

• Structural Engineering and Mechanics
• /
• v.43 no.6
• /
• pp.771-794
• /
• 2012

This paper presents a multi-objective evolutionary algorithm for combinatorial optimisation and applied for design optimisation of fiber reinforced composite structures. The proposed algorithm closely follows the implementation of Pareto Archive Evolutionary strategy (PAES) proposed in the literature. The modifications suggested include a customized neighbourhood search algorithm in place of mutation operator to improve intensification mechanism and a cross over operator to improve diversification mechanism. Further, an external archive is maintained to collect the historical Pareto optimal solutions. The design constraints are handled in this paper by treating them as additional objectives. Numerical studies have been carried out by solving a hybrid fiber reinforced laminate composite cylindrical shell, stiffened composite cylindrical shell and pressure vessel with varied number of design objectives. The studies presented in this paper clearly indicate that well spread Pareto optimal solutions can be obtained employing the proposed algorithm.

• 수도
• /
• s.28
• /
• pp.27-36
• /
• 1983

Oxidation process constitute an important and often indispensable measure in the reliable production of safe drinking water. Optimal introduction of oxidation processes into the treatment of drinking water requires an exact knowledge of the reactions taking place and of their interrelationships. It is the aim of this paper to review the necessary knowledge in summarized form.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.35-39
• /
• 2004

In a shipyard, there exist various critical decision making components pertaining to various production hindrances. The most prominent one is best-fit spatial arrangement for the minimal spatial occupancy with better pick-ability for the erection of the ship in the dock. During the present research, a concept have been conceived to evade the gap between the identification oj inter-relationships among a set of blocks to be included on a pre-erection area, and a detailed graphical layout of their positions, is called an Optimal Block Relationship Diagram A research has been performed on generation of optimal (or near Optimal) that is, with minimal scrap area. An effort has been made in the generation of optimal (or near-optimal) Optimal Block Relationship Diagram with the Goldberg's Genetic Algorithms with a representation and a set of operators are 'trained' specifically for this application. The expected result to date predicts very good solutions to test problems involving innumerable different blocks to place. The suggested algorithm could accept input from an erection sequence generator program which assists the user in defining the nature and strength of the relationships among blocks, and could produce input suitable for use in a detailed layout stage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1242-1252
• /
• 2006

Many applications in computer graphics require complex, highly detailed models. However, to control processing time, it is often desirable to use approximations in place of excessively detailed models. Therefore, we have developed the notion of an optimal matrix to simplify the model surface which can then rapidly obtain high quality 2D patterns by flattening the 3D surface. Firstly, the woman's 3D body was modeled based on Size Korea data. Secondly, the 3D model was divided by shell and block for the pattern draft. Thirdly, each block was flattened by the grid and bridge method. Finally, we select the optimal matrix and demonstrate it's efficiency and quality. The proposed approach accommodates surfaces with darts, which are commonly utilized in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. This can facilitate much better approximations, in both efficiency and exactness.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.575-580
• /
• 2000

Switching of the transmission lines(T/L) is one of the ways for suppressing the short circuit capacity. This paper presents the extended optimal power flow(OPF) to the problem of selecting the T/Ls to be open. The constraints of the short circuit currents within limits are added to the inequalities of OPF. Also, the overload on the other lines due to switching of T/Ls is avoided by the linearized inequalities. The number of the open lines can be minimized by incorporating into the objective function of OPF in order to maintain reliability. The method of an effective calculation of the extended OPF is also proposed in this paper, which makes the two parts decoupled. The one concerning the generation dispatch is solved in the first place by the conventional method. Secondly, the other concerning the line-switching is optimized by the proposed formulation.

• Journal of Plant Biology
• /
• v.36 no.1
• /
• pp.83-90
• /
• 1993

As a part of the study on the relation between exogenous polyamines and various components necessary for protein biosynthesis in the germinating maize seeds, the effects of the polyamines on protein biosynthesis and irbosome activity were investigated. The protein biosynthesis activity by S-30 containing all components necessary for protein biosynthesis was increased by exogenous polyamines, spermidine, spermine and putrescine. As the concentration of polyamine treated was increased, the optimal Mg2+ concentration of in vitro poly U-dependent protein synthesis system was gradually reduced. However, the optimal Mg2+ concentration of poly U-dependent system containing optimal polyamine was 10 mM regardless of the sort of polyamine. It could be infered that polyamines play an important part in protein biosynthesis in the higher plant, and that the role of polyamines take partially the place of Mg2+ action. The activities of ribosome and S-100 in protein biosynthesis were increased by 46.7% and 17.7% with spermidine, and by 44.1% and 16.2% with spermine, and by 29.1% and 19.3% with putrescine. It could be concluded that the increase of protein biosynthesis by polyamines in mainly owing to the ribosome activation.