• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.39-45
• /
• 2007

This paper proposed a shortcut method for the structure design of dividing wall column based on the Fen-ske-Underwood equation by applying it on three conventional simple column configuration. It is shown that the proposed shortcut method can design the column structure including the feed tray, dividing wall section, and side-stream tray in a simple and efficient way in the initial design stage. Simulation study using HYSYS to compare the energy saving performance between the conventional sequential two column system and the dividing wall column designed by the proposed method shows that the proposed dividing wall column system saves from 16% to 65% more over the condepends on the composition of intermediate component while the optimal energy consumption pattern to internal flow distribution on the dividing wall section is characterized by the ESI factor of the feed mixture.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3855-3863
• /
• 2022

An evaluation of the radiation shielding performance of high-Z-particle-loaded polylactic acid (PLA) composite materials was pursued. Specimens were produced via fused deposition modeling (FDM) using copper-PLA, steel-PLA, and BaSO₄-PLA composite filaments containing 82.7, 75.2, and 44.6 wt% particulate phase contents, respectively, and were tested under broad-band flash x-ray conditions at the Sandia National Laboratories HERMES III facility. The experimental results for the mass attenuation coefficients of the composites were found to be in good agreement with GEANT4 simulations carried out using the same exposure conditions and an atomistic mixture as a model for the composite materials. Further simulation studies, focusing on the Cu-PLA composite system, were used to explore a shield design parameter space (in this case, defined by Cu-particle loading and shield areal density) to assess performance under both high-energy photon and electron fluxes over an incident energy range of 0.5-15 MeV. Based on these results, a method is proposed that can assist in the visualization and isolation of shield parameter coordinate sets that optimize performance under targeted radiation characteristics (type, energy). For electron flux shielding, an empirical relationship was found between areal density (AD), electron energy (E), composition and performance. In cases where ${\frac{E}{AD}}{\geq}2MeV{\bullet}cm{\bullet}g^{-1}$, a shield composed of >85 wt% Cu results in optimal performance. In contrast, a shield composed of <10 wt% Cu is anticipated to perform best against electron irradiation when ${\frac{E}{AD}}<2MeV{\bullet}cm{\bullet}g^{-1}$.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.119-124
• /
• 2023

In this study, experimental approach of the measurement of condensation and evaporation heat transfer coefficients is discussed for mixed refrigerants using in the ultra low-temperature cooling system for semiconductor etching process. An experimental apparatus was described performing the condensation and evaporation heat transfer measurements for mixed refrigerants. The mixed refrigerant used in this study was composed of the optimal mixture determined in previous research, with a composition of Ar:R14:R23:R218 = 0.15:0.4:0.15:0.3. The experiments were conducted over a temperature range from -82℃ to 15℃ and at pressures ranging from 18.5 bar to 5 bar. The convection heat transfer coefficients of the mixed refrigerant were measured at flow rates corresponding to actual operating conditions. The condensation heat transfer coefficient ranged from approximately 0.7 to 0.9 kW/m2K, while the evaporation heat transfer coefficient ranged from 1.0 to 1.7 kW/m2K. The detailed discussion of the experimental methods, procedures, and results were described in this paper.

• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.111-117
• /
• 2002

Effect of substrate composition, stocking density and food organisms on survival and growth of the surf clam, Spisula sachalinensis was studied. Spat collection from the substratum was the highest, when its sand size was less than 250 $\mu m4; at such substratum, survival and growth of the surf clam were also the highest. The spat (1.4 mm) grew to 4.6 mm and 8.2 mm in shell length on day 30 and 50, respectively. The relationship between shell length (SL) and shell height (SH), shell breadth (SB), total weight (TW) and shell weight (SW) of the spat are formulated by the following equations; SH : 0.7351SL+0.2272 ( $r^2$ =0.9600)i SB = 0.4037SL+0.2112 ($r^2$ = 0.9452); TW : 0.2824SL^{2.7020} ($r^2$ = 0.9820)i SW = $0.4021SL^{2.0217} ($r^2$ : 0.6169). In the substratum containing fine sand, growth and survival of the clam roared at the density of 1~2 ind./$cm^2$ were optimal. The quality of feed decreases in the following order; C. calcitrans, mixture group, I. galbana, P. lutheri, T. suecica.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.481-488
• /
• 1989

A serum-free medium that could be used for the large-scale culture of mouse hybridoma to produce monoclonal antibodies was developed. The medium was based on a 1:1 mixture of Iscove's Modified Dulbecco's Medium and Ham's F-12, supplemented with insulin 10$\mu\textrm{g}$/$m\ell$, transferrin 10$\mu\textrm{g}$/$m\ell$, ethanolamine 10$\mu$M and selenium 30nM (designated EBM (enriched basal medium) with the supplements). The effect of various supplements of steroid hormones, vitamins, lipid and mineral salts was investigated and their optimal concentration was determined to replace fetal calf serum (PCS). These components were added respectively and then added by way of two or three combination to discern of which component combination was effective to the culture of hybridoma. As a result, serum-free medium KM3 (EBM with BSA 100$\mu\textrm{g}$/$m\ell$, mineral cocktail and 0.05% PEG) was deter-mined. The hybridoma Alps 25-3 cultured in this medium showed almost the same growth rate as in medium added with 2% fetal bovine serum. However, the antibody concentration from KM3 cultures was 80% of that obtained from culture with FCS. KM3 was also examined for the culture of other mouse hybridomas, KW, A4W & HCGK, and it was confirmed that it could support the growth of these hybridomas and the production of monoclonal antibodies.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.127-133
• /
• 2011

Non-Alkali multicomponent $La_2O_3-Al_2O_3-SiO_2$ glasses has been designed and analyzed on the basis of a mixture design experiment with constraints. Fitted models for thermal expansion coefficient, glass transition temperature, Young's modulus, Shear modulus and density are as follows: ${\alpha}(/^{\circ}C)=8.41{\times}10^{-8}x_1+5.72{\times}10^{-7}x_2+2.13{\times}10^{-7}x_3+1.09{\times}10^{-7}x_4+1.10{\times}10^{-7}x_5+1.15{\times}10^{-7}x_6+2.72{\times}10^{-8}x_7+2.41{\times}10^{-7}x_8-1.08{\times}10^{-8}x_1x_2+4.28{\times}10^{-8}x_3x_7-2.02{\times}10^{-8}x_3x_8-1.60{\times}10^{-8}x_4x_5-2.71{\times}10^{-9}x_4x_8-2.19{\times}10^{-8}x_5x_6-3.89{\times}10^{-8}x_5x_7$ $T_g(^{\circ}C)=7.36x_1+15.35x_2+20.14x_3+8.97x_4+13.85x_5+4.22x_6+28.21x_7-1.44x_8-0.84x_2x_3-0.45x_2x_5-1.64x_2x_7+0.93x_3x_8-1.04x_5x_8-0.48x_6x_8$ $E(GPa)=2.04x_1+14.26x_2-1.22x_3-0.80x_4-2.26x_5-1.67x_6-1.27x_7+3.63x_8-0.24x_1x_2-0.07x_2x_8+0.14x_3x_6-0.68x_3x_8+0.29x_4x_5+1.28x_5x_8$ $G(GPa)=0.35x_1+1.78x_2+1.35x_3+1.87x_4+9.72x_5+29.16x_6-0.99x_7+3.60x_8-0.48x_1x_6-0.50x_2x_5+0.08x_3x_7-0.66x_3x_8+0.94x_5x_8$ ${\rho}(g/cm^3)=0.09x_1+0.51x_2-4.94{\times}10^{-3}x_3-0.03x_4+0.45x_5-0.07x_6-0.10x_7+0.07x_8-9.60{\times}10^{-3}x_1x_2-8.20{\times}10^{-3}x_1x_5+2.17{\times}10^{-3}x_3x_7-0.03x_3x_8+0.05x_5x_8$ The optimal glass composition similar to the thermal expansion coefficient of Si based on these fitted models is $65.53SiO_2{\cdot}25.00Al_2O_3{\cdot}5.00La_2O_3{\cdot}2.07ZrO_2{\cdot}0.70MgO{\cdot}1.70SrO$.

• Journal of Nutrition and Health
• /
• v.36 no.9
• /
• pp.898-907
• /
• 2003

Antioxidative function of uncooked powdered food (Sangsik) was evaluated in rats consuming nutritionally unbalanced diet including 1％ cholesterol, high proportion of animal lipids (lard : soybean oil : 8 . 2) , sub-optimal levels of vitamin and mineral mixture along with 0.5% ethanol in drinking water. The uncooked powdered food tested in the present study was a mixture composed of 42 kinds of plant foods (cereals, legumes, seaweeds, vegetables, and fruits) supplemented with vitamins and minerals, and dietary fiber. Control rats were fed the semi-purified diet based on the AIN-93G composition, and nutritionally unbalanced rats were divided into 3 groups, and fed one of the following diets with 0.5% ethanol in drinking water for 5 weeks : unbalanced control diet (UC) ,20% Sangsik powder supplemented diet (S20), and 40% Sangsik powder supplemented diet (S40) . Food efficiency ratio was significantly higher in rats fed S40 compared to the value for rats fed UC (p < 0.05). Hepatic level of thiobarbituric acid reactive substances (TBARS) was significantly lower in rats fed UC compared to that for control rats (p < 0.05) , and was not influenced by dietary supplementation of the Sangsik powder. Hepatic superoxide dismutase (SOD) activity was significantly higher in rats fed UC compared to that for control rats (p < 0.05) , and significantly reduced in rats fed S20 or S40 compared to the value for unbalanced control rats. Feeding unbalanced control diet significantly reduced the ratio of hepatic GSH-Px ＋ catalase/SOD activities compared to the value for control rats, and this decrease in the ratio of antioxidant enzyme activities was reversed by adding the Sangsik powder to the diet at 20% (p <0.05) . Based on the results of antioxidant enzyme activities, feeding uncooked powdered diet appears to provide a favorable environment for body's antioxidative defense mechanism. Serum levels of Fe and Cu were significantly lower in rats fed the Sangsik powder supplemented diets compared to the value for unbalanced control rats (p < 0.05) , and levels of Se, Mn, and Zn were also tended to be decreased by dietary supplementation of the Sangsik powder. These results postulate the possibility that ingredients used in the uncooked powdered food may decrease the bioavailability of trace elements in rats.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1023-1029
• /
• 2001

Hexagonal ferrite $Co_2$Z(B $a_3$ $Co_2$F $e_{24}$ $O_{41}$ ) was prepared by various coprecipitation-oxidation methods. The formation of $Co_2$Z was studied in order to determine the optimal method. The $Co_2$Z composition hydroxides were prepared with the different oxidation and precipitation from the aqueous solution of $Ba^{2+}$, $Co^{2+}$ and F $e^{2+}$ chloride mixture. The coprecipitates were heat-treated at various temperatures, and their formation phases and microstructures were investigated from the analyses of DTA/TGA, powder XRD and SEM. The $Co_2$Z phase was observed in the case where the precursor will have the amorphous like oxyhydoxide($\delta$-FeOOH), and formed from $Ba_3$F $e_{32}$ $O_{51}$ , BaF $e_{12}$ $O_{19}$ (M-type) and $Ba_2$ $Co_2$F $e_{12}$ $O_{22}$ (Y-type). The $Co_2$Z was synthesized by the heat-treatment of the coprecipitate, which was prepared from the precipitation after oxidizing the chloride mixed solution, above 110$0^{\circ}C$.EX>.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.23-28
• /
• 2010

This study was conducted to determine the optimal rooting media composition and plant growth regulators for the mass production of new three cultivars in Dendrobium. Rooting medium experiments showed that shooting rate of 'Fizz' was the highest in perlite (Per) and vermiculite (V) mixture (1 : 1, v/v). Rooting rate of 'Prince' was 10% in the same treatment 60 days after cutting, while those of 'Candy' and 'Fizz' showed no shooting. With various kinds of auxin and different levels of concentrations, shooting rate in the other cultivars except 'Candy' increased highly at 60 days after cutting. Whereas, there were no differences between control and treatment except that of 'Fizz' with 200 ppm of IBA treatments showing 86.7%. Rates of cutting with leaves of 'Candy' and 'Fizz' were fairly high with 200 ppm of IBA compared to the control. Rate of rooting of 'Prince' was twice with 200 ppm of IBA or 50 ppm of NAA compared to the control. With various kinds of cytokinin and different concentrations, shooting rate of 'Candy' was 20% with 50 ppm of BA at 60 days after cutting; however, that of 'Fizz' increased in all treatments in 30 days after cutting and reached 100% with 200 ppm of BA compared to the control which was 77% at 60 days after cutting. Kinetin treatment had little effect on shooting rate compared to control at all concentrations. Treatment with 200 ppm of BA had clear effect on the rate of cutting with leaves of 'Fizz' and 'Prince', which was similar to shooting rate. However, the same treatment of BA had no effect on the rooting rate in all cultivars.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.6
• /
• pp.836-842
• /
• 2009

The objectives of this study were to evaluate potential benefits of intercropping of corn with runner bean for a smallsized farming system, based on land equivalent ratio (LER) and silage yield and quality of corn intercropped with runner bean (Phaseolus vulgaris L.), in arid conditions of Turkey under an irrigation system. This experiment was established as a split-plot design in a randomized complete block, with three replications and carried out over two (consecutive) years in 2006 and 2007. Seven different mixtures (runner bean, B and silage corn sole crop, C, 10% B+90% C, 20% B+80% C, 30% B+70% C, 40% B+60%C, and 50% B+50%C) of silage corn-runner bean were intercropped. All of the mixtures were grown under irrigation. The corn-runner bean fields were planted in the second week of May and harvested in the first week of September in both years. Green beans were harvested three times each year and green bean yields were recorded each time. After the 3rd harvest of green bean, residues of bean and corn together were randomly harvested from a 1 $m^{2}$ area by hand using a clipper when the bean started to dry and corn was at the dough stage. Green mass yields of each plot were recorded. Silages were prepared from each plot (triplicate) in 1 L mini-silos. After 60 d ensiling, subsamples were taken from this material for determination of dry matter (DM), pH, organic acids, chemical composition, and in vitro DM digestibility of silages. The LER index was also calculated to evaluate intercrop efficiencies with respect to sole crops. Average pH, acetic, propionic and butyric acid concentrations were similar but lactic acid and ammonia-N levels were significantly different (p<0.05) among different mixtures of bean intercropped with corn. Ammonia-N levels linearly increased from 0.90% to 2.218 as the percentage of bean increased in the mixtures up to a 50:50 seeding ratio. While average CP content increased linearly from 6.47 to 12.45%, and average NDF and ADF contents decreased linearly from 56.17 to 44.88 and from 34.92 to 33.51%, respectively, (p<0.05) as the percentage of bean increased in the mixtures up to a 50:50 seeding ratio, but DM and OM contents did not differ among different mixtures of bean intercropped with corn (p>0.05). In vitro OM digestibility values differed significantly among bean-corn mixture silages (p<0.05). Fresh bean, herbage DM, IVOMD, ME yields, and LER index were significantly influenced by percentage of bean in the mixtures (p<0.01). As the percentage of bean increased in the mixtures up to a 50:50 seeding ratio, yields of fresh bean (from 0 to 24,380 kg/ha) and CP (from 1,258.0 to 1,563.0 kg/ha) and LER values (from 1.0 to 1.775) linearly increased, but yields of herbage DM (from 19,670 to 12,550 kg/ha), IVOMD (from 12,790 to 8,020 kg/ha) and ME (46,230 to 29,000 Mcal/ha) yields decreased (p<0.05). In conclusion, all of the bean-corn mixtures provided a good silage and better CP concentrations. Even though forage yields decreased, the LER index linearly increased as the percentage of bean increased in the mixture up to a 50:50 seeding ratio, which indicates a greater utilization of land. Therefore, a 50:50 seeding ratio seemed to be best for optimal utilization of land in this study and to provide greater financial stability for labor-intensive, small farmers.