• Composites Research
• /
• 제27권6호
• /
• pp.207-212
• /
• 2014

The shape optimization of composite flexbeam sections of a bearingless helicopter rotor is studied using a finite element (FE) sectional analysis integrated with an efficient evolutionary optimization algorithm called particle swarm assisted genetic algorithm (PSGA). The sectional optimization framework is developed by automating the processes for geometry and mesh generation, and the sectional analysis to compute the elastic and inertial properties. Several section shapes are explored, modeled using quadratic B-splines with control points as design variables, through a multiobjective design optimization aiming minimum torsional stiffness, lag bending stiffness, and sectional mass while maximizing the critical strength ratio. The constraints are imposed on the mass, stiffnesses, and critical strength ratio corresponding to multiple design load cases. The optimal results reveal a simpler and better feasible section with double-H shape compared to the triple-H shape of the baseline where reductions of 9.46%, 67.44% and 30% each are reported in torsional stiffness, lag bending stiffness, and sectional mass, respectively, with critical strength ratio greater than 1.5.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.205-206
• /
• 2022

This study intends to conduct tests on subsidence and drying shrinkage by mixing CaO-CSA expansion materials to ensure the stability of CLC, and to understand its properties. Based on CLC of 0.6, the replacement ratio of CaO-CSA expansion material was conducted at five levels compared to blast furnace slag, and the results are as follows. The replacement of CaO-CSA expansion material at an appropriate level produces ethringhite and potassium hydroxide, and it is believed that the internal voids of CLC and the Tobelmorite interlayer structure are charged to increase the structural stability, leading to an increase in compressive strength and a decrease in the drying shrinkage. However, it is judged that tissue relaxation due to excessive substances in the high replacement ratio affects the stability of CLC. In the future, we will conduct additional experiments on density, absorption rate, flow test, and settlement, and evaluate and analyze the stability of CLC by selecting the optimal replacement ratio of CaO-CSA expansion materials.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.47-52
• /
• 2003

This study was performed to investigate the flow behavior of fresh concrete. strength properties, and durability properties on the chloride penetration resistance of hardened concrete containing Meta-Kaolin(MK) in the range from common strength to high strength to facilitate the use. The results are compared with properties of concrete containing Si1ca Fume(SF). As a result. superplasticizer required in MK concrete was decreased by 8-28% compared to SF concrete with the same slump, but MK concrete became more sticky than SF concrete. It was also found that considering the strength, the optimal cement replacement ratio of MK was 15%, and MK had concrete durable and dense by decreasing the average pore diameter of concrete.

• 한국강구조학회 논문집
• /
• 제24권4호
• /
• pp.451-458
• /
• 2012

구조적 우수성이 입증된 콘크리트 충전 강관 (CFT) 시스템은 폭두께비가 큰 강관을 사용할 때 더욱 경제적인 설계가 될 수 있다. 하지만, 현재 국내외의 규준에서는 CFT에 사용할 수 있는 강관의 폭두께비를 제한하고 있어 건설 재료를 보다 더 효율적으로 활용할 수 있는 가능성을 미리 차단하고 있다. 본 연구에서는 폭두께비 60, 70, 80, 90, 100를 갖는 각형 단주 CFT에 대해 압축실험을 실시하여 CFT에서의 좌굴 후 내력을 확인하였고 기존의 규준에서 제시한 폭두께비 제한치를 완화한 식을 제시하였다.

• 한국건축시공학회지
• /
• 제4권2호
• /
• pp.113-118
• /
• 2004

This study is a basic experiment on quality management of the compression strength of high strength concrete, aiming. at quality management of high strength mass concrete by giving the temperature hysteresis of the mass test pieces to managerial test pieces. Different from ordinary concrete, high strength concrete generally shows the temperature high rising caused by hydration heat inside the concrete. It is known that, in mass concrete, thermal stress occurs due to the difference in temperature between the inside and the outside, which causes a significant difference in compression strength between structure beams and managerial test pieces. It is also reported that there is a large difference between the compression strength of cylindrical managerial test pieces of standard underwater curing and the strength of structure beam concrete. Thus, this study made concrete test pieces in an optimal mix ratio for each strength level, and also created thermal insulation curing box and managerial test pieces. Then it carried out comparative analysis in relation to core strength and suggested equipment and a technique that can control the strength of high strength concrete mass more conveniently and accurately.

• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.47-54
• /
• 2017

본 연구에서는 바이오주입재를 시멘트와 같은 분말 형태로 주입재를 개발하였다. 바이오그라우팅의 배합비를 선정하기 위해 규산소다 3호 : 물의 비율(50 : 50, 35 : 65, 20 : 80), 시멘트 : 바이오주입재의 비율(100 : 0, 90 : 10, 70 : 30)로 각각 샌드겔 공시체를 제작하여 시간 경과에 따른 geltime을 분석하였다. 그리고 geltime에 따른 일축압축강도를 평가하여 시공조건에 맞는 배합비를 선정할 수 있도록 제시하였다. 실내실험 결과, 규산소다 3호 : 물의 비율이 35 : 65, 시멘트 : 바이오주입재의 비율이 90 : 10일 때 겔타임과 일축압축강도가 잘 나타나 적정한 최적배합비로 확인하였다.

• Geomechanics and Engineering
• /
• 제17권5호
• /
• pp.439-444
• /
• 2019

It is generally known that high strength soil is indicative of well-graded particle size distribution. However, there are some special cases of firm ground despite poor grade distribution, especially a specific gap-graded soil. Based on these discoveries, this study investigated the development of an additive of gap-graded soils designed to increase soil strength. This theoretical concept was used to calculate the mixed ratio required for optimal soil strength of the ground sample. The gap-graded aggregate was added according to Plato's polyhedral theory and subsequently calculated ratio and soil strength characteristics were then compared to characteristics of the original soil sample through various test results. In addition, the underground stress transfer rate was measured according to the test conditions. The test results showed that the ground settlement and stress limit thickness were reduced with the incorporation of gap-graded soil. Further field tests would confirm the reproducibility and reliability of the technology by using gap-graded soil to reinforce soft ground of a new construction site. Gap-graded soil has the potential to reduce the construction cost and time of construction compared to other reinforcing methods.

• 한국수산과학회지
• /
• 제49권1호
• /
• pp.20-25
• /
• 2016

This study elucidated the effects of physicochemical factors on the production of cooked rice analogs using calcium alginate gels. Cooked rice analogs were prepared using various sodium alginate concentrations, agitation speeds, dropping distances, coating times, curing times and heating times. The diameter ratio and rupture strength of authentic cooked rice were 0.38 and 268.4 kPa, respectively. The diameter ratio of the analogs prepared with 0.7% (w/v) sodium alginate was 0.39, which was the closest to that of authentic cooked rice. When sodium alginate solution (0.7%, w/v) was dropped into calcium chloride solution (2%, w/v) via a nozzle, the diameter ratio of the analogs at an agitation speed of 520 rpm was 0.39. The optimal dropping distance was 8 cm and the optimal coating and curing times were each 20 min. The analogs were coated with β-cyclodextrin to improve their physical properties. The diameter ratio of the coated analogs was little changed; however, the rupture strength decreased slightly after heating for 60 min at 95°C.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.95-96
• /
• 2012

This study makes with the environment-friendly artificial stone which doesn't use the cement and natural aggregate and increases the blast furnace slag that is the eco-friendly material that is the industrial byproduct, fly ash, and availability of the red mud and applies the coares aggregate substitute material as the cleistothecium. The experimental plan according to it indicated the compressive strength and flexural strength which is the most excellent in the mixied ratio 40% of the result degree of closeness magnetism of experimenting with the optimal mix obtained through the preceding stude.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.198-201
• /
• 2000

The capacity of micelle formation between astaxanthin and various surfactants was compared. Tween 20 was identified the most suitable surfactant in terms of astaxanthin extraction capacity. The ethylene oxide group of Tween 20 was identified as the most significant factor to increase the HLB value that determined the extraction capacity. The effect of micelle formation condition, such as molar ratio of astaxanthin and Tween 20, pH and ionic strength was also investigated. pH and ionic strength showed no significant effects. Antioxidant activity of astaxanthin was twice of ${\alpha}-tocopherol$ and 4 times of ${\beta} -carotene$. Crude astaxanthin extract from the yeast cell seemed to be less degraded than pure astaxanthin by air and light exposure, probably because of the presence of other carotenoids and lipids. Under the optimal conditions, the molar ratio of micelle formed was found to be 1 : 12 for astaxanthin : Tween 20.