• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.627-635
• /
• 2020

In this study, the optimal support span determination of pipeline system was carried out in consideration of the effects of seismic loads. The theoretical support and structural analysis were used to determine the optimal support span of piping system according to pipe diameter using theoretical and structural deflection criteria. The reliability of the analysis results was secured by comparing the structural and theoretical results. In particular, the optimum support span of piping system was obtained by considering the effects of seismic load, and the optimal support span of pipe diameter and piping system tended to be proportional to each other. When considering the effects of earthquakes on different pipe diameters(300~2,500mm), the span length is reduced by up to 48% at the allowable stress criterion, and the pipe span length is reduced by up to 5.9% at the deflection criterion. It can be seen that the effect of the seismic load on the determination of the piping span length has a greater effect on the stress than the displacement.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.139-146
• /
• 1997

The main purpose of this paper is to investigate the near-optimal parameters of continuous beam subject to a moving load. The computer-aided optimization technique is used to obtain the near-optimal parameters. The computer program is developed to obtain the natural frequency parameters and the forced vibration responses to a transit point load for the continuous beam with variable support spacing, mass and stiffness. The optimization function to describe the design efficiency is defined as a linear combination of four dimensionless span characteristics: the maximum dynamic stress; the stress difference between span segments; the rms deflection under the transit point load; and the total span mass. Studies of three span beams show that the beam with near-optimal parameters can improve design efficiency by 12 to 24 percent when compared to a reference configuration beams of the same total span length.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.95-96
• /
• 2008

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.32-37
• /
• 2011

In dispersion management (DM) and optical phase conjugation applied into optical transmission links with multi fiber spans for minimizing the impact of nonlinearity and group velocity (GVD), implementation possibility of DM using only one fiber span for pre- or postcompensation was assessed as a function of duty cycle of RZ pulse and residual dispersion per span (RDPS). It is confirmed that DM with optimal net residual dispersion (NRD) controlled by only one fiber span could be sufficiently applied into optical transmission links, though optimal NRD is more increased than that in transmission links with the general DM scheme of pre- and postcompensation. Thus, it is expected that optical transmission system is simply designed and implemented by applying the proposed DM scheme into real optical transmission links. Also, it is confirmed that the advantageous duty cycle of RZ is 0.5 and RDPS is setting to be small value for the effective transmitting wide signal wavelength range in optical links with optimal NRD controlled by only one fiber span.

• 전산구조공학
• /
• 제10권2호
• /
• pp.233-242
• /
• 1997

이 논문은 연속보의 동적 최적설계에 관한 연구이다. 본 연구에서는 연속보의 근사적인 최적제원을 결정하기 위하여 컴퓨터 프로그램의 실행결과를 이용한 기법을 이용하였다. 경간길이, 질량 및 휨강성이 변화하는 연속보의 자유진동해석과 이동 집중하중이 작용하는 경우 동적응답해석을 실행할 수 있는 컴퓨터 프로그램을 개발하였다. 모형실험 결과와 이론적인 해석결과가 잘 일치하여 해석결과의 타당성을 검증할 수 있었다. 설계효율을 나타내기 위하여 최대 동적응력, 경간사이의 응력차이, 이동 집중하중이 작용하는 점에서의 rms 처짐 및 전체지간의 총질량 등 4가지의 무차원 변수들의 선형결합으로 이루어지는 최적함수를 정의하였다. 3경간 연속보에 대한 해석결과 개략적인 최적제원을 갖는 연속보로 설계하는 경우 등간격의 등단면 연속보에 비해 설계효율을 개선할 수 있음을 알 수 있었다.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.501-507
• /
• 2021

In this study, In order to prevent the safety accidents caused by the sliding, to develop the non-slip grating, the stability judgment based on the span length of the grating and the gap of the bearing bar is performed. The structural analysis of Grating was carried out in accordance with the provisions set out in Grating's load-bearing test conditions. As the span length increases, the deflection increases and the stress and span length tend to be proportional to each other. It was shown that the larger the span, the linear increase in stress and exponential increase in deformation of grating. The maximum stress of grating was approximately 58.2 MPa, indicating a very stable safety rate of about 4.3 compared to the yield strength of the grating material. Based on these results, it will be able to be utilized as the basic data for determining the optimal dimensions of non-slip grading by performing optimal designs in the future.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.357-363
• /
• 2022

In this study, in order to develop an non-slip metal grating, the stability of the grating according to the span of the grating and the gap and height of the bearing bar was evaluated. The optimal shape design of the grating was performed using the results of determining the stability of the grating. The purpose of this study is to determine the stability according to the spacing and height of the bearing bar by applying the design pressure at the design stage to develop the anti-skid grating, and to design the optimal shape for cost reduction. In the optimal design, the target variable was set as the mass, and the optimal design of the grating was performed based on about 20%. Regardless of the height of the bearing bar of the grating, the stress and deformation of the span and the grating showed a proportional tendency to each other, and it was found that the stress decreased as the height of the bearing bar increased. Based on the structural analysis results, an optimal design was performed using mass as the objective variable, and the existing 2mm thickness was changed to 1.6mm, reducing the mass by about 19%. The stress increased by about 4.4% compared to the maximum stress of the existing grating, but the minimum safety factor was 3.1, indicating that the optimally designed grating was stable.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.175-181
• /
• 2004

인천항의 송도 선도시와 영종도 인천국제공항을 이어주는 제2연륙교 건설사업이 1999년 민간제안사업으로 정부에 제안되어 3차례에 걸쳐 실시된 선박의 통항 안전성에 관한 연구에도 불구하고 적정 교각폭이 결정되지 못하고 있다. 따라서 본 연구에서는 인천항의 장래 교통량의 측면과 최대선형의 선박 조종성 측면에서 소요 교각폭을 산정함을 목적으로 하고 있다. 연구결과, 제2연륙교 주경간 항로는 교통량 수용을 위하여 기본적으로 왕복항로 설계가 필요하며, 2020년 교통량 수용을 위한 소요 교각폭은 1,005m, 최대선형의 왕복통항을 위한 소요 교각폭은 990m로 산정되어 1,000m 교각폭이 장래 교통량 수용 및 최대선형의 안전한 왕복통항이 가능한 것으로 평가되었고, 700m 교각폭은 최대선형의 일방통항은 가능하나 최대선형과 일반 중${\cdot}$소형선박과의 왕복통항은 안전성이 확보되지 아니한 것으로 평가되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.594-597
• /
• 2012

전체 전송로 중간에 광 위상 공액기 (OPC; optical phase conjugator)를 둔 광전송 링크에서 파장 분할 다중 (WDM; wavelength division multiplexed) 송신기부터 OPC까지의 전반 전송 구획과 OPC부터 WDM 수신부까지의 후반 전송 구획 각각을 구성하는 단일 모드 광섬유 (SMF; single mode fiber)의 중계 구간 (span)들 중 단지 하나의 중계 구간에서만 RDPS(residual dispersion per span)만 갖고 나머지 중계 구간에서는 RDPS가 0 ps/nm로 설계된 전송 링크에서 WDM 신호를 최상의 성능으로 전송하기 위한 최적의 링크 구조를 도출하였다.

• 한국가축번식학회지
• /
• 제22권1호
• /
• pp.89-94
• /
• 1998

A study was made to investigate the effects of concerning factors with IGF-I recovery on the final IGF-I concentration in the effluent and to establish recovery conditions of IGF-I using liquid emulsion membranes(LEM). D2EHPA was best carrier among Amberlite LA2, Aliquit 336 and D2EHPA for recovery rate of IGF-I. Recovery rate of IGF-I by D2EHPA volume in the oil phase was increased as increasing D2EHPA volume, and optimal volume of D2EHPA was 5% in this experiment. The recovery rate of IGF-I by D2EHPA was increased by the decreasing from pH 7 to pH 4 of external phase. Therefore, optimal pH value was 4.0. Optimal concentrations of sulfuric acid in internal phase, paraffin oil in oil phase and Span 80 for recovery rate of IGF-I were 0.1M, 2.0% and 5%, respectively, and optimal W/O rate was 2. These results suggested that optimal conditions for recovery of IGF-I were D2EHPA(5%) as carrier, pH 4.0, 0.1M sulfuric acid, 2% paraffin oil, 2.0 W/O rate and 5.0% Span 80.