• 제목/요약/키워드: Optimal Sending Rate

검색결과 7건 처리시간 0.019초

P2P 환경에서 효율적 망 자원 이용을 위한 피어의 송신률 결정 방법 (A Method for Determining Sending Rates of Peers for Efficient Network Resource Utilization in P2P Environment)

  • 박재성
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제1권2호
    • /
    • pp.99-102
    • /
    • 2012
  • P2P 응용 서비스의 성능은 피어 선택의 지능화를 통해 불필요한 망간 트래픽 교환양을 줄임으로써 향상시킬 수 있다. 그러나 P2P 오버레이 망의 피어간 논리적 링크는 하부 망의 물리적 링크들로 구성되기 때문에 선택된 피어의 송신률에 의해 결정되는 트래픽 패턴에 따라 하부 링크들에 부가되는 부하는 달라진다. 따라서 피어의 송신률이 신중하게 결정되지 않는다면 일부 하부 망 링크들의 이용률은 낮은 반면 다른 링크들은 혼잡하게 되는 부하 불균형 문제가 발생된다. 이와 같은 하부 망 자원의 비효율적 이용 현상을 방지하기 위해 본 논문에서는 최적화 기법을 통해 피어의 송신률을 결정하기 위한 전략적 방안을 제안한다. 제안 기법은 피어의 수신률을 일정 수준으로 보장함과 동시에 하부 망의 링크 이용률의 최대값을 최소화 할 수 있도록 서버 피어의 송신률을 결정함으로써 하부 망 자원의 효율적 이용과 클라이언트 피어에게 일정 수준의 서비스 품질을 제공한다.

Discrete-Time Gaussian Interfere-Relay Channel

  • Moon, Kiryang;Yoo, Do-Sik;Oh, Seong-Jun
    • Journal of Communications and Networks
    • /
    • 제18권3호
    • /
    • pp.299-310
    • /
    • 2016
  • In practical wireless relay communication systems, non-destination nodes are assumed to be idle not receiving signals while the relay sends messages to a particular destination node, which results in reduced bandwidth efficiency. To improve the bandwidth efficiency, we relax the idle assumption of non-destination nodes and assume that non-destination nodes may receive signals from sources. We note that the message relayed to a particular node in such a system gives rise to interference to other nodes. To study such a more general relay system, we consider, in this paper, a relay system in which the relay first listens to the source, then routes the source message to the destination, and finally produces interference to the destination in sending messages for other systems. We obtain capacity upper and lower bounds and study the optimal method to deal with the interference as well as the optimal routing schemes. From analytic results obtained, we find the conditions on which the direct transmission provides higher transmission rate. Next, we find the conditions, by numerical evaluation of the theoretical results, on which it is better for the destination to cancel and decode the interference. Also we find the optimal source power allocation scheme that achieves the lower bound depending on various channel conditions. We believe that the results provided in this paper will provide useful insights to system designers in strategically choosing the optimal routing algorithms depending on the channel conditions.

Enhanced TFRC for High Quality Video Streaming over High Bandwidth Delay Product Networks

  • Lee, Sunghee;Roh, Hyunsuk;Lee, Hyunwoo;Chung, Kwangsue
    • Journal of Communications and Networks
    • /
    • 제16권3호
    • /
    • pp.344-354
    • /
    • 2014
  • Transmission control protocol friendly rate control (TFRC) is designed to mainly provide optimal service for unicast applications, such as multimedia streaming in the best-effort Internet environment. However, high bandwidth networks with large delays present an environment where TFRC may have a problem in utilizing the full bandwidth. TFRC inherits the slow-start mechanism of TCP Reno, but this is a time-consuming process that may require many round-trip-times (RTTs), until an appropriate sending rate is reached. Another disadvantage inherited from TCP Reno is the RTT-unfairness problem, which severely affects the performance of long-RTT flows. In this paper, we suggest enhanced TFRC for high quality video streaming over high bandwidth delay product networks. First, we propose a fast startup scheme that increases the data rate more aggressively than the slow-start, while mitigating the overshooting problem. Second, we propose a bandwidth estimation method to achieve more equitable bandwidth allocations among streaming flows that compete for the same narrow link with different RTTs. Finally, we improve the responsiveness of TFRC in the presence of severe congestion. Simulation results have shown that our proposal can achieve a fast startup and provide fairness with competing flows compared to the original TFRC.

Detecting LDoS Attacks based on Abnormal Network Traffic

  • Chen, Kai;Liu, Hui-Yu;Chen, Xiao-Su
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제6권7호
    • /
    • pp.1831-1853
    • /
    • 2012
  • By sending periodically short bursts of traffic to reduce legit transmission control protocol (TCP) traffic, the low-rate denial of service (LDoS) attacks are hard to be detected and may endanger covertly a network for a long period. Traditionally, LDoS detecting methods mainly concentrate on the attack stream with feature matching, and only a limited number of attack patterns can be detected off-line with high cost. Recent researches divert focus from the attack stream to the traffic anomalies induced by LDoS attacks, which can detect more kinds of attacks with higher efficiency. However, the limited number of abnormal characteristics and the inadequacy of judgment rules may cause wrong decision in some particular situations. In this paper, we address the problem of detecting LDoS attacks and present a scheme based on the fluctuant features of legit TCP and acknowledgment (ACK) traffic. In the scheme, we define judgment criteria which used to identify LDoS attacks in real time at an optimal detection cost. We evaluate the performance of our strategy in real-world network topologies. Simulations results clearly demonstrate the superiority of the method proposed in detecting LDoS attacks.

셀 처리 요구 시간 및 우선 순위를 고려한 ATM 스위치의 성능 분석에 관한 연구 (A Study of ATM Switch Performance Analysis in Consideration of Cell Processing Due Time and Priority)

  • 양우석;이재호
    • 한국통신학회논문지
    • /
    • 제24권12A호
    • /
    • pp.1910-1916
    • /
    • 1999
  • 본 논문은 버스트 트래픽 특성을 갖는 ATM 망에서 입력 버퍼 제어형 ATM 스위치의 서비스 률 및 성능 문제점을 해결하기 위해 임의의 시간 간격을 갖고 입력되는 입력 트래픽의 전단에, 셀 다중화기를 두어 셀 들을 다중 분리하고 각 셀 들의 도착 시간 간격과 처리 요구 시간(due time)을“표기(marking)”하여 각각의 입력 버퍼로 전송하고, 서버는 각 입력 버퍼의 헤더에 있는 셀 도착 시간 간격과 셀 들의 처리 요구 시간을 비교하여 처리 요구 시간이 가장 작은 값을 가지는 셀을 우선 처리하여 전송토록 하였다. 이렇게 함으로써 실 시간적으로 빠르게 전송되어야 하는 셀 들을 비 실 시간적으로 전송되어도 되는 셀 보다 먼저 전송하여 셀 처리 시간을 보장하고, 지연에 민감한 트래픽을 우선 처리함으로서 CBR 및 VBR의 트래픽 특성을 만족토록 하였다. 이러한 셀 처리 요구 시간 및 우선 순위를 고려한 ATM 스위치의 성능을 분석하기 위해서 각 출력 포트당 4개의 가상 버퍼를 설정하고 각각의 버퍼에 ATM Forum에서 권고하는 CBR/rt-VBR(셀 손실 및 지여 우선순위), nrt-VBR(셀 손실 우선순위), ABR(셀 지연 우선순위) 및 UBR(하위순위) 트래픽 특성에 따?, 셀의 도착 시간과 셀 처리 요구 시간을 다르게 부과하여 최적의 서비스 파라메타 값을 도출하고 각각의 트래픽 특성에 따른 서비스를 분석하였다.

  • PDF

Bluetooth Ad hoc 망에서 멀티 슬롯 SAR-QT 알고리즘을 고려한 WAP 패킷의 성능 분석 (Performance Analysis of WAP Packet Considering Multi-Slot SAR-QT Algorithm in Bluetooth Ad hoc Network)

  • 문일영;노재성;조성준
    • 한국항행학회논문지
    • /
    • 제6권2호
    • /
    • pp.158-167
    • /
    • 2002
  • 본 논문은 Bluetooth 환경에서 SAR-QT (Segment And Re-assembly Quick Transfer) 알고리즘을 사용하여 WAP (Wireless Application Protocol) 성능을 향상시키기 위한 WAP 패킷의 전송 시간을 분석하였다. 이러한 WAP의 전송 능력을 향상시키기 위한 한 방법으로 SAR-QT의 과정은 WTP (Wireless Transaction Protocol) 상위 계층에서 내려온 전체 메시지를 분할한 다음 베이스밴드에서 패킷을 전송하게 된다. 그리고 Bluetooth 피코넷 환경에서 SAR-QT 알고리즘을 사용하여 Bluetooth 패킷 타입 중 DM (Data-Medium rate) 1, DM3, DM5에 따른 WAP over Bluetooth의 패킷 전송 시간을 분석하였다. 이 SAR-QT 알고리즘은 멀티 슬롯으로 전송할 경우 L2CAP (Logical Link Control And Adaptation Protocol) 에이스밴드 패킷 전송 시간을 감소시킨다. 결과로부터, WAP over Bluetooth 환경에서 WAP 패킷의 전송 시간을 줄이기 위해서 WTP 패킷 크기가 증가해야 한다는 점을 알 수 있었다 또한, 이러한 무선 채널을 고려한 Rician 페이딩 환경에서 WAP over Bluetooth의 적당한 패킷 크기를 구할 수 있었다.

  • PDF

유성 버스트 통신을 위한 통신 프로토콜의 최적설계 (Optimum Design of a Communication Protocol for Meteor Burst Communication)

  • 권혁숭
    • 한국정보통신학회논문지
    • /
    • 제5권5호
    • /
    • pp.892-901
    • /
    • 2001
  • 유성 버스트 통신로는 재래식 무선 경로에 비해 많은 장점이 있는데도 그 도통율이 수%이 하로 적기 때문에 일반 상용 통신망에는 아직 넓게 이용되지 못하고 있다 이러한 수분의 일초이하의 짧은 시간에 발생하는 버스트를 통해서 가능한 한 많은 데이터 량을 전송하려면 특별히 개발된 정교한 통신 프로토콜이 필요하다. 이 논문은 통제국이 주기적인 탐색신호를 송출함으로서 버스트를 효과적으로 탐지하고 신속 히 포착하며 이 버스트가 존속하는 짧은 시간에 이 버스트를 통해서 가능한 한 많은 량의 데이터를 전송할 수 있도록 하는 통신 프로토콜을 소개한다. 각 단계의 처리 시간을 해석하여 버스트의 여러 가지 길이에 따라 메시지를 최소한의 지연으로 전송할 수 있는 최적합한 데이터 패킷의 길이를 도출한다. 이 해석결과 에 따라 버스트의 평균 지속시간을 분석하여 최적합한 패킷길이를 도출하는 루틴을 개발하고, 이것을 사용함으로서 주워진 시간에 가능한 한 많은 메시지를 전송할 수 있도록 하는 유성 버스트 통신로를 위한 프로토콜을 제안한다.

  • PDF