• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1163-1171
• /
• 2017

The problem of fault current to exceed the rated capacity of a power circuit breaker can cause a serious accident to hurt the reliability of the power system. In order to solve this issue, current limiting reactors and circuit breakers with increased capacity are utilized but these solutions have some technical limitations. Back-to-back high voltage direct current(BTB HVDC) may be applied for reducing the fault current. When BTB HVDCs are installed for reduction in fault current, selecting the optimal location of the BTB HVDC without causing overload of line power becomes a key point. In this paper, we use genetic algorithm to find optimal location effectively in a short time. We propose a new methodology for determining the BTB HVDC optimal location to reduce fault current without causing overload of line power in metropolitan areas. Also, the procedure of performing the calculation of fault current and line power flow by PSS/E is carried out automatically using Python. It is shown that this optimization methodology can be applied effectively for determining the BTB HVDC optimal location to reduce fault current without causing overload of line power by a case study.

• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.2
• /
• pp.117-124
• /
• 2012

A client collaboration (CC) system is proposed for a user relay system. The proposed scheme focuses on the management of transmit power and leakage interference. In the proposed CC system, edge users transmit signals to the masters considered as user relays. The masters relay the signals of the edge users to the base station using the resource blocks (RBs) that are assigned to the edge users. The leakage interference and power consumption were analyzed in the CC system. In addition, an optimal master location problem was formulated based on the signal-to-leakage-plus-noise ratio (SLNR). Because the optimal master location problem is quite complex, a sub-optimal master location problem was proposed and a closed-form sub-optimal master location was obtained. The edge users generate smaller leakage interference and power consumption in the proposed CC system compared to the system without the CC. The numerical results showed that the edge users generate smaller leakage interference and power consumption in the proposed CC system compared to the system without the CC, and the average throughput increases.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.39-46
• /
• 2015

REMICON(Ready Mixed Concrete), the most essential material of construction work, is produced from facility called "Batcher plant." In order to produce Remicon, Batcher Plant needs to be supplied with basic raw material such as ballast, sand, cement, admixture and water. In remicon industry, overland transport vehicles are used during the whole manufacturing process from producing to infilling at the construction site. Thus, the transportation cost sums up be to 20 percent of whole manufacturing cost and transport capacity and distance travelled have direct and major effect on manufacturing costs. This paper suggests a method to find optimal location of batcher plant using modified Steiner point, suggesting the most effective and flexible connection through among construction site, aggregate, cement and remicon producing plant. This paper also proposes reducing of transport cost at maximum 60% by calculation through optimized plant location. The modified Steiner point theory proposed in this paper also can be applied to optimal location of a $2^{ry}$ substation or MCC panel for minimizing of power loss, voltage drop, line distance and etc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.8-11
• /
• 2021

This paper proposes a method of estimating the optimal position of a robot in order to provide a service by approaching a user located outside the sensing area of the robot in an indoor environment. First, in order to estimate the user's location, the location in the indoor environment was estimated by applying a trilateral approach to the beacon-tag module data, and Voronoi thinning to set the optimal movement goal from the user's estimated location. Based on the generated nodes, the final location was estimated through the calculation of the user location, obstacle, and movement path, and the location accuracy of the service robot was verified through the movement of the destination of the actual robot platform.

• Structural Engineering and Mechanics
• /
• v.51 no.3
• /
• pp.377-402
• /
• 2014

In this study, optimal distribution of springs which supports a cantilever beam is investigated to minimize two objective functions defined. The optimal size and location of the springs are ascertained to minimize the tip deflection of the cantilever beam. Afterwards, the optimization problem of springs is set up to minimize the tip absolute acceleration of the beam. The Fourier Transform is applied on the equation of motion and the response of the structure is defined in terms of transfer functions. By using any structural mode, the proposed method is applied to find optimal stiffness and location of springs which supports a cantilever beam. The stiffness coefficients of springs are chosen as the design variables. There is an active constraint on the sum of the stiffness coefficients and there are passive constraints on the upper and lower bounds of the stiffness coefficients. Optimality criteria are derived by using the Lagrange Multipliers. Gradient information required for solution of the optimization problem is analytically derived. Optimal designs obtained are compared with the uniform design in terms of frequency responses and time response. Numerical results show that the proposed method is considerably effective to determine optimal stiffness coefficients and locations of the springs.

• Korean Management Science Review
• /
• v.29 no.1
• /
• pp.143-152
• /
• 2012

Location area planning (LAP) problem is to partition the cellular/mobile network into location areas with the objective of minimizing the total cost in location management. The minimum cost has two components namely location update cost and searching cost. Location update cost is incurred when the user changes itself from one location area to another in the network. The searching cost incurred when a call arrives, the search is done only in the location area to find the user. Hence, it is important to find a compromise between the location update and paging operations such that the cost of mobile terminal location tracking cost is a minimum. The complete mobile network is divided into location areas. Each location area consists of a group of cells. This partitioning problem is a difficult combinatorial optimization problem. In this paper, we use particle swarm optimization (PSO) to obtain the best/optimal group of cells for 16, 36, 49, and 64 cells network. Experimental studies illustrate that PSO is more efficient and surpasses those of precious studies for these benchmarking problems.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.109-122
• /
• 2019

The expansion of double-income households is increasing the social interest in child care. In particular, children's entrance into elementary school is considered to be the main cause of women's career break as well as childbirth. This study proposes an optimal location selection method for caring facilities for elementary school students. As a candidate for care facilities, we selected existing child care facilities. We proposed a dual structure evaluation method that considers locational characteristics as well as mathematical optimization when selecting the optimal location. The experiment was conducted in Songpa-gu, Seoul. A total of 36 optimal locations were selected from a total of 258 candidate facilities. First, the evaluation criteria were established using public data, and the primary candidate facilities were selected by ranking the location scores. At this time mesh resampling method was used to integrate various public data into one. Next, the final care facilities were selected using the p-median method. The results chosen are not only the optimal location considering total distance but also satisfy various location criteria considering the characteristics of the care facility. We expect that the proposed method will contribute to public data convergence or utilization and it will be helpful for policy decision when selecting the optimal location for public facilities.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.179-189
• /
• 2008

The object of this study is to develope a program with proposed numerical techniques for an optimal seismic control of structures using active tendon systems. Ricatti closed-loop algorithm has been applied to control the active tendon systems with time-delay problem. The optimal control is formulated as an optimization problem which is finding optimal weighting matrices by minimizing the quadratic performance index by SUMT. In order to find the optimal location of active tendons in structures, controllability index has been introduced. From numerical examples, the current optimal control technique with optimal location of tendons was suitable to control the seismic response of structures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.37-47
• /
• 2019

The study purposed to investigate the optimal location of core and offset outrigger system considering floor diaphragm. To accomplish this aim, a structure design of 70 stories building was performed by using MIDAS-Gen. And the leading factors of the analysis research were the slab stiffness, the stiffness of shear wall and the outrigger position in plan. Based on the analysis results, we analyzed and studied the influences of the shear wall stiffness and the slab stiffness on optimal location of core and offset outrigger considering floor diaphragm. The results of the analysis study indicated whether the slab stiffness, the stiffness of shear wall and the outrigger position in plan had an any impact on optimal location in outrigger system of tall building. Also the paper results can give help in getting the structural engineering materials for looking for the optimal position of outrigger system in the high-rise building.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.179-184
• /
• 2007

The problem of selecting base station location in the design of mobile communication system has been basically regarded as a problem of assigning maximum users in the cell to the minimum base stations while maintaining minimum SIR. and it is NP hard. The objective function of warehouse location problem, which has been used by many researchers, is not proper function in the base station location problem in CDMA mobile communication, The optimal and approximate solutions have been presented by using proposed object function and algorithms of exact solution, and the simulation results have been assessed and analyzed. The optimal and approximate solutions are found by using mixed integer programming instead of meta-heuristic search methods.