• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.103-111
• /
• 2008

This study was carried out to investigate the optimal application rate and time of mixed expeller cake (MEC) for the replacement of chemical fertilizer. Dongjin-1, as cultivated rice was used at Fluvio-marine deposit in Honam plain paddy field. Soil chemical properties were improved by the application of MEC. Contents of total nitrogen and organic matter were higher in 70%, 100% plots of basal dressing than standard fertilizer application (SFA) plot. Cation exchangeable capacity was highly increased in 70% plot of basal dressing. Also, the content of organic matter in soil was increased with MEC application. Cation exchangeable capacity, total nitrogen and available phosphate were decreased according to late application time. The content of inorganic nitrogen in soil showed high tendency at more application rate of MEC, and nitrogen mineralization at harvest season have finished in 50%, 70% plots of basal dressing. The content of inorganic nitrogen in soil was increased according to late application time, however it was decreased in the late period of growth. Leaf color value became darker with increased application rate of MEC. Leaf color was dark green in MEC application plots at panicle formation stage, on the other hand, it was light green in 50%, 70% plots of basal dressing at heading stage. SPAD reading value of leaf-color was high during the whole growth stage in MEC application plots. More application rate of MEC showed higher tendency of fertilizer nitrogen absorption. Nitrogen use efficiency was the highest in 70% plot of basal dressing. Absorbed amount of fertilized nitrogen was increased in 10~15days before transplanting and nitrogen use efficiency was high according to the late application time. The ratio of perfect kernel and the content of protein on hulled rice showed high tendency at the less application rate of MEC. The ratio of head rice on milled rice showed high tendency at the less application rate of MEC. Rice yield increased 4% in 100% and 70% plots of basal dressing compare with SFA ($5.18Mg\;ha^{-1}$) plot respectively. Ear and culm length of rice were long according to the late application time, while the numbers of spikelet and ear were increased and the percentage of ripened grain was decreased. Rice yield was increased 2~5% in all MEC application plots compared to SFA plot and especially, increased 10~15days before transplanting in application plots. The optimal application rate and time of MEC on normal paddy field in plain were concluded that 70% basal dressing and 10~15days before transplanting

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.1
• /
• pp.50-56
• /
• 2015

Italian ryegrass is generally cultivated by a winter forage in a paddy field, the harvest season overlaps with rice transplantion in some cases. In addition, farmers can miss the optimal seedtime for Italian ryegrass because of the rainy season. Therefore, this research was conducted between October 2012 and June 2013 in Kwangjin, Korea to examine the effect of spring-seeding on the yields and quality of Italian ryegrass for the determination of an alternative if the optimal seedtime is missed. This trial consists of four different seeding dates (15 February, 25 February, 5 March, and 15 March) and three varieties (Kowinmaster, Kowinearly, and Green farm). The Italian ryegrass varieties "Kowinmaster," "Kowinearly," and "Green farm" were sown on February 15. The heading date of each variety showed from May 12 to May 9 and interval time of five days but the Treatment of March 15 planting date showed three days interval. The Kowinmaster variety, planted on February 15, was 93.0 cm taller on March 15 with a height of 105.7 cm. The Kowinearly and Green farm varieties planted on February 15 were of a similar height on February 25 and received a poor lodging score when planted quickly. The dry matter (DM) yield of the Kowinearly planted on February 15 was high but that of Green farm was low at 6,609 kg/ha and a difference was not shown between the varieties. The DM yield was different for those varieties planted on February 15 and March 15 (P<0.05). The crude protein content (CPC) of those varieties planted on February 15 showed an average of 8.8%, while those that were planted on March 15 showed an average that was about 2.3% higher at 11.1%; furthermore, the latter also showed lower acid detergent fiber (ADF) and total digestible nutrient (TDN) contents, by 2.1% and 1.5%, respectively. The relative feed value was about 5.9% higher, depending on the seeding date, as well as being slower and showing less difference between the varieties. According to this study, Italian ryegrass planted in a paddy field of the southern region of Korea on February 25 will produce a high-quantity yield with nutritive value.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.287-293
• /
• 2013

BACKGROUND: Soil incorporation of green manure crop(GMC) and liquid pig manure(LPM) is one of the methods for reduction of chemical fertilizer and the increase of crop yield. The objective of this study was to select optimal incorporation time of GMCs on growth and nutrient property in paddy soil treated LPM. METHODS AND RESULTS: The kinds of GMCs were Hordeum vulgare L.(green barley, GB) and Vicia villosa roth(hairy vetch, HV). The effects of GMCs on rice yield were investigated under different incorporation times of GMCs(LPM1: at 25 days before rice transplantation, LPM2: at 18 days before rice transplantation, LPM3: at 11 days before rice transplantation). In GB treatments, the biomass was greater in the order of $$LPM3{\geq_-}LPM2{\geq_-}LPM1$$. Contents of N, P and K ranged 1.21~1.28, 0.36~0.38 and 1.41~1.45%, respectively, regardless of incorporation times. The amounts of nutrient supply in GB treatments were higher in LPM1 than those in other treatment conditions. In GB treatments, rice yields in LPM1, LPM2 and LPM3 were 523, 525 and 526(increasing yield 3% than control) kg/10a, respectively. In HV treatments, the amounts of nutrient supply were higher in the order of $$LPM3{\geq_-}LPM2{\geq_-}LPM1$$. Rice yields were 530 kg/10a for LPM1, 531 kg/10a for LPM2, 535 (increasing yield 5% than control) kg/10a for LPM3 in HV treatments, respectively. CONCLUSION(s): The optimum incorporation time of green barley and hairy vetch was at 11 days before rice transplantation(LPM3) in paddy soil with liquid pig manure.

• Korean journal of food and cookery science
• /
• v.32 no.6
• /
• pp.665-676
• /
• 2016

Purpose: This study was conducted to find the optimal freezing method and storage conditions for welsh onion. Methods: Cut welsh onions (0.3 cm) were packed in nylon/linear low density polyethylene (LLDPE) film bags, and frozen utilizing still-air freezing at -$20^{\circ}C$ (SAF20) and -$40^{\circ}C$ (SAF40), and immersed-liquid freezing at -$40^{\circ}C$ (ILF40); they were then stored at -$20^{\circ}C$ for 7 months. During storage, quality characteristics were measured monthly. Results: Drip loss was the lowest in the ILF40 packaging. Color difference in the stem (white part) did not differ significantly according to freezing conditions and storage time. Color difference in the leaf (green part) and stem was the lowest in SAF20. pH remained unchanged, while total aerobic bacterial count, pyruvic acid and moisture content decreased during storage. Pyruvic acid content of ILF40 was the highest among the freezing treatments. Fructose and glucose contents increased gradually during storage. Citric acid, malic acid, succinic acid and fumaric acid contents were unaffected, regardless of the freezing conditions. Conclusion: The optimal freezing method for welsh onions with the least quality changes was determined to be immersed liquid freezing, following by preservation up to 7 months by freeze-storing.

• Ocean Systems Engineering
• /
• v.4 no.4
• /
• pp.263-278
• /
• 2014

The spudcan requires the suitable design considering the soil, platform, and environmental conditions. Its shape needs to be designed to secure sufficient reaction of soil so that it can prevent overturning accidents. Its shape also has to minimize the installation and extraction time. Even in the same soil condition, the reaction of soil may be different depending on the shape of spud can, mainly the slope of top and bottom plates. Therefore, in this study, the relation between the slope of plates and the reaction of soil with and without water jetting is analyzed to better understand their interactions and correlations. For the investigation, a wind turbine installation jack-up rig (WTIJ) is selected as the target platform and the Gulf of Mexico is considered as the target site. A multi layered (sand overlying two clays) soil profile is applied as the assumed soil condition and the soil-structure interaction (SSI) analysis is performed by using ANSYS to analyze the effect of the slope change of the bottom plate and water jetting on the reaction of soil. This kind of investigation and simulation is needed to develop optimal and smart spudcan with water-jetting control in the future.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.93-103
• /
• 2013

In recently, a growing concern for the health of urban residents increased interests in a variety of outdoor activities simply be done in terms of cost and time. They are specially interested in low-impact and safe exercises around residential or working area. Walking is the one of easily doing exercise in daytime or nighttime near residential area. The sidewalks of boulevard near the residential area is the best place for exercise because of easy access and the green space with roadside trees. However, if the nighttime is not guaranteed the proper lighting condition, the possibility of exposure to crime and the threat to pedestrian safety can be increased. Because roadside trees are one of the potential obstacle for lighting condition, supplementary lightings are important to mitigate interruption for safety. To meet such a need, the purpose of this study is to propose a simulation approach which improves lighting condition on sidewalks of boulevard with variety of roadside trees. To do so, the simulation approach is applied for analyzing the interrupted condition by classified five standard types of roadside trees considering the growth of them and finding optimal layout of supplementary luminaires by lighting types. The results of this approach shows that it is useful for assessing the safety of pedestrian in nighttime.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.135-148
• /
• 2002

In this paper, a queue length calculation algorithm using image detectors has been proposed. The algorithm produces the queue length using a pair of image detectors installed both on upstream and on downstream of a corridor. In addition, a new framework for controlling the traffic signal system based on queue length has been presented. More specifically, the scheme of determining the cycle time and green split using the queue lengths has been proposed. To validate the results, a simulation study was conducted with a network environment. Results showed that the proposed method gave better operational performance than a traditional method. However, additional validation effort is necessary in order to apply the real traffic conditions.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.223-228
• /
• 2017

Nanopowders provide better details for micro features and surface finish in powder injection molding processes. However, the small size of such powders induces processing challenges, such as low solid loading, high feedstock viscosity, difficulty in debinding, and distinctive sintering behavior. Therefore, the optimization of process conditions for nanopowder injection molding is essential, and it should be carefully performed. In this study, the powder injection molding process for Fe nanopowder has been optimized. The feedstock has been formulated using commercially available Fe nanopowder and a wax-based binder system. The optimal solid loading has been determined from the critical solid loading, measured by a torque rheometer. The homogeneously mixed feedstock is injected as a cylindrical green body, and solvent and thermal debinding conditions are determined by observing the weight change of the sample. The influence of the sintering temperature and holding time on the density has also been investigated. Thereafter, the Vickers hardness and grain size of the sintered samples have been measured to optimize the sintering conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.10
• /
• pp.467-473
• /
• 2014

Since the operating conditions of HVAC systems are different from those for which they are designed, on-going commissioning is required to optimize the energy consumed and the environment in the building. This study presents a methodology to analyze operational data and its applications. A predicted operation model is to be produced through a statistical data analysis using multiple regressions in SPSS. In this model, the dependent variable is the pre-cooling time, and the independent variables include the power output of the supply air inverter during pre-cooling, the supply air set temperature during pre-cooling, the indoor temperature-indoor set temperature just before pre-cooling, supply heat capacity, and the lowest outdoor air temperature during non-cooling/non-heating hours. The correlation coefficient R2 of the multiple regression model between the pre-cooling hour and the internal/external factors is of 0.612, and this could be used to provide information related to energy conservation and operating guidance.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.567-579
• /
• 2016

Several energy saving techniques in cellular wireless networks such as active base station (BS) selection, transmit power budget adaptation and user association have been studied independently or only part of these aspects have been considered together in literature. In this paper, we jointly tackle these three problems and propose an integrated framework, called dynamic cell reconfiguration (DCR). It manages three techniques operating on different time scales for ultimate energy conservation while guaranteeing the quality of service (QoS) level of users. Extensive simulations under various configurations, including the real dataset of BS topology and utilization, demonstrate that the proposed DCR can achieve the performance close to an optimal exhaustive search. Compared to the conventional static scheme where all BSs are always turned on with their maximum transmit powers, DCR can significantly reduce energy consumption, e.g., more than 30% and 50% savings in uniform and non-uniform traffic distribution, respectively.