• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.36-44
• /
• 2005

This paper presents an implementation of high performance control of a reluctance synchronous motor (RSM) using a neural network with a direct torque control. The equivalent circuit in a RSM, which considers iron losses, is theoretically analyzed. Also, the optimal current ratio between torque current and exiting current is analytically derived. In the case of a RSM, unlike an induction motor, torque dynamics can only be maintained by controlling the flux level because torque is directly proportional to the stator current. The neural network is used to efficiently drive the RSM. The TMS320C3l is employed as a control driver to implement complex control algorithms. The experimental results are presented to validate the applicability of the proposed method. The developed control system shows high efficiency and good dynamic response features for a 1.0 [kW] RSM having a 2.57 ratio of d/q.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.803-812
• /
• 2006

In order to reduce the negative effects of dynamic coupling among vehicle subsystems and improve the handling performance of vehicle under severe driving conditions, a vehicle chassis control integration approach based on a main-loop and servo-loop structure is proposed. In the main-loop, in order to achieve satisfactory longitudinal, lateral and yaw response, a sliding mode controller is used to calculate the desired longitudinal, lateral forces and yaw moment of the vehicle; and in the servo-loop, a nonlinear optimizing method is adopted to compute the optimal control inputs, i.e. wheel control torques and active steering angles, and thus distributes the forces and moment to four tire/road contact patches. Simulation results indicate that significant improvement in vehicle handling and stability can be expected from the proposed chassis control integration.

• International Journal of Control, Automation, and Systems
• /
• 제4권1호
• /
• pp.53-62
• /
• 2006

In this paper, ATM network congestion control with explicit rate feedback is considered. In ATM networks, delays commonly appear in data transmission and have to be considered in congestion control design. In this paper, a bounded single round delay on the return path is considered. Our objective is to design an explicit rate feedback control that achieves a robust optimal $H_2$ performance regardless of the bounded time-varying delays. An optimization approach in terms of linear matrix inequalities (LMIs) is given. Saturation in source rate and queue buffer is also taken into consideration in the proposed design. Simulations for the cases of single source and multiple sources are presented to demonstrate the effectiveness of the design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.79-84
• /
• 2000

This paper presents an implementation of digital position control system for an induction motor vector drives by a direct torque control(DTC) using the 16bit DSP TMS320 F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controller for motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are stator flux and torque observer using current model that inputs are current sensing of motor terminal and rotor angle for a low speed operating area, two hysteresis controller, optimal switching look-up table, and IGBT voltage source inverter by fully integrated control software. The developed control system are shown a good motion control response characteristic results and high performance features using 2.2Kw general purposed induction motor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.675-684
• /
• 2004

The Helicopter system has a non-linearity and complexity. Futhermore, because of absence of its correct mathematical model. it is difficult to control accurately its attitudes for elevation angle and azimuth one. Therefore, we proposed a GA-PID control technique to control these angles efficiently. The proposed GA-PID controller can systematically generate optimal PID parameters by applying GA theory to a helicopter attitude control system. Through the computer simulation, the GA-PID technique shows better attitude control characteristic than traditional PID control technique.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.453-458
• /
• 2000

Design of an in-process feedback control system has been studied for precision grinding. A grinding system consists of a grinding tool, a turn table and a disk-shaped workpiece on the table is taken as an object. A grinding process model has been deduced which gives some reasoning about the process errors. In the control system the tool position is actively controlled by an electro-magnetic actuator in-process. The ground error is feedback to compose a closed-loop control system and an optimal PID controller is applied. Some control performances such as transient response and disturbance such as transient response and disturbance attenuation have been examined, which convinces the effectiveness of the control. Some methods for implementation of the control. Some methods for implementation of the control have been suggested from a standpoint of practical application.

• Journal of Mechanical Science and Technology
• /
• 제15권9호
• /
• pp.1240-1247
• /
• 2001

A robust control design scheme using well-developed SISO techniques is proposed for maglev vehicles that are inherently unstable MIMO systems. The proposed separate control method has basically two control loops: a stabilizing loop by a pole-placement technique, and a performance loop using a novel optimal LQ loop-shaping technique. This paper shows that the coupling terms involved in maglev vehicles with multimagnets should not be neglected but compensated for their stability and performance robustness. The robustness properties of the proposed control system are then evaluated under variations of vehicle masses and air gaps through a computer simulation. This paper also describes the reason why the proposed control technique can be suggested as a tool using only SISO techniques in controlling unstable MIMO systems such as maglev vehicles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2251-2253
• /
• 2003

This paper is concerned with the active vibration control of flexible cantilever beam system using electromagnetic force actuator. The main objective of this paper is to propose the control algorithms and implement the experimental setups for active vibration control. Several control algorithms are proposed and implemented on the experimental setups to show their efficacy. These include a PID control design, an optimal $H_2$ control design, and a fuzzy PID control design. Effectiveness and performance of the designed controller were verified by both simulation and experiment results.

• 대한환경공학회지
• /
• 제38권9호
• /
• pp.482-496
• /
• 2016

하천과 호수의 부영양화로 인하여 남조류가 대량으로 증식하게 되면 고유의 생물독소로 인한 위해뿐만 아니라 정수처리 과정에서 경제적 손실을 야기할 가능성이 있다. 현재 상용화되어있는 천연조류제거제인 M사의 W.H. 응집제(이하 W.H.)는 참나무 유래 성분의 살조 및 타감작용을 이용한 응집.부상공정을 통하여 조류를 사전에 제거함으로써 정수공정에 미치는 영향을 효과적으로 저감할 수 있다. 그러나, W.H.를 활용한 응집 부상공정은 정수처리의 전처리공정으로 적용된 사례가 없기 때문에 최적주입농도의 결정기법에 대한 보고 또한 전무한 실정이다. 본 연구에서는 (1) 한강에서 채취한 복합 조류와 (2) 남조류를 선택적으로 대량 배양하여 광조건 하에서 W.H. 투여량 및 조류농도 등의 여러 조건을 변화시키면서 Jar-test를 시행하여 응집 부상공정에서의 조류의 제거기작을 검토하였다. Jar-test 결과를 바탕으로 IBM-SPSS를 활용한 다중회귀분석을 실시하여 최적 W.H. 주입농도를 결정하기 위한 Chl-a 농도와 탁도를 변수로 하는 두 가지 선형식을 도출하였다. 또한 유입수질의 변동에 따라 W.H. 주입농도를 신속하게 결정하고 자동화할 수 있는 자동제어 로직의 프로토타입(Prototype)을 제시하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.847-858
• /
• 2015

Control strategy and corresponding parameters have significant impacts on the overall technical and economic characteristics of composite energy storage systems (CESS). A better control strategy and optimized control parameters can be used to improve the economic and technical characteristics of CESS, and determine the maximum power and stored energy capacity of CESS. A novel coordinated control strategy is proposed considering the coordination of various energy storage systems in CESS. To describe the degree of coordination, a new index, i.e. state of charge coordinated response margin of supercapacitor energy storage system, is presented. Based on the proposed control strategy and index, an optimization model was formulated to minimize the total equivalent cost in a given period for two purposes. The one is to obtain optimal control parameters of an existing CESS, and the other is to obtain the integrated optimal results of control parameters, maximum power and stored energy capacity for CESS in a given period. Case studies indicate that the developed index, control strategy and optimization model can be extensively applied to optimize the economic and technical characteristics of CESS. In addition, impacts of control parameters are discussed in detail.