• 제목/요약/키워드: Optical-type Guide sensor

검색결과 3건 처리시간 0.016초

무인차용 광학식 유도 센서 개발 (Development of An Optical- type Guide Sensor for AGV)

  • 성학경;류재춘
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.162-162
    • /
    • 2000
  • We describe a new optical-type guide sensor for AGV. It is robust the disturbance of the light. The developed optical-type guide sensor is very useful in the clean room environment where the light disturbance is very critical through the hole on the surface of the floor.

  • PDF

LC(Liquid crystal)-광섬유를 이용한 최소 침습적 레이저 온열 치료용 온도 측정 센서의 개발을 위한 기초 연구 (Feasibility study on the development of Liquid crystal-optical fiber temperature sensor for minimal invasive laserthermia)

  • 이봉수;황영묵;정순철
    • 센서학회지
    • /
    • 제12권5호
    • /
    • pp.225-230
    • /
    • 2003
  • 최근 최소 침습적 수술(minimal invasive surgery)방법에 대한 관심이 높아지면서 인체 내부의 악성 종양을 치료하는 방법 중의 하나로 레이저를 이용한 온열 치료법(laserthermia)이 사용되고 있다. 인체 심부의 암세포에 대한 레이저 열 치료는 레이저를 조직에 흡수시키면서 발생되는 열을 이용하여 암세포를 제거하는 방법이다. 본 시스템은 레이저 전달용 광섬유, 영상 획득용 내시경, 온도 측정 센서 등으로 구성된다. 온열 요법은 치료할 암세포를 적절한 온도($42{\sim}43^{\circ}C$)로 유지시켜주면서 정상 세포는 레이저의 조사에 의한 열 발생을 최소화시키는 것이 중요한데 이러한 온도 유지를 위해서는 신속 정착한 온도 측정이 요구되고 있다. 본 연구에서는 새로운 형태의 LC(liquid crystal)-광섬유 온도 측정 센서를 개발하기 위해 온도 변화에 따른 LC물질의 색 변화 정도를 수광-발광 광섬유로서 측정하였고 측정된 수광량과 온도 변화 사이의 관계식을 도출하였다. 그리고 광섬유와 LC물질간의 복잡한 거리 문제를 해결하고, 보다 향상된 실험 결과를 얻기 위해 Y-coupler를 제작하여 LC물질의 반사 광량과 온도 사이의 관계도 알아보았다.

리니어 모터를 위한 능동 자기 베어링의 설계 및 제어 (Design and Control of an Active Magnetic Bearing for Linear Motors)

  • 양광원;허경무
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
    • /
    • pp.119-122
    • /
    • 2001
  • This paper deals with new type of active magnetic bearing (AMB) for the linear motors. We adopted optical sensing mechanism for the gap sensing. Using the laser and the PSD (Position Sensitive Device), the absolute rotor position is obtained independent of the profile of the guide rail. With this measurement, the rotor can be controller to follow the straight beam of the laser. Another advantage of optical sensing mechanism might be the elimination of the possible interference between the proximity sensor and the electro-magnet. By adopting the push-full actuating mechanism, the bearing stiffness is increased near the equilibrium position. For the simplicity, distributed control system is constructed. Eight independent PID control algorithm is used with the full order observer. Several simulation md test results are presented.

  • PDF