• 대한전자공학회논문지
• /
• 제22권6호
• /
• pp.7-12
• /
• 1985

Oxygen-active 금속, 천이금속 및 oxygen-noble 금속, 즉, Al, Ti, Mn, Ni 그리고 Cuㄹ박막의 광투과율을 조사하였다. Slide-glass 위에 $6{\times}10^{-5}$ ~ $2{\times}10^{-4}$ mbr 압력범위와 0.5 ~ $2{\AA}$/sec 의 증착속도 범위에서 두께를 $85{\AA}$내외로 하여 증착하였다. 증착속도와 진공도는 금속박막의 광학적 성질에 큰 영향을 미치며 이는 주로 산소개입에 의한 것임을 알 수 있었다. 특히 광투과율이 매우 낮다고 알려진 산소와의 친화력이 강한 금속, 즉, Al, Ti, Cr 그리고 Ni의 광투과율을 저 진공도나 느린 증착속도에 의한 증착공정으로 상당히 향상시킬 수 있었다.

• 대한화학회지
• /
• 제55권3호
• /
• pp.550-555
• /
• 2011

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.47-58
• /
• 2000

Transmittances of SiO2 and ZrO2 thin films, made by the electron beam evaporation method, were measured with a spectrophotometer to be used in determining their optical constants and thicknesses in the envelop method. New color glass lenses with high transmittance, which now can be manufactured in the industry, was successfully designed by using these constants. Also the vacuum evaporator could be mechanically corrected with these constants as correction factors.

• 한국재료학회지
• /
• 제19권10호
• /
• pp.533-537
• /
• 2009

This paper presents a new method for the improvement of color temperature without the change of the driving scheme using transparent dielectric layers with various metal oxides (CeO$_2$, Co$_3$O$_4$, CuO, Fe$_2$O$_3$, MnO$_2$, NiO) in plasma display panels (PDP). In this study, we fabricated ZnO-B$_2$O$_3$-SiO$_2$-Al$_2$O$_3$ glasse with various metal oxides and examined the optical properties of these glasses. As the metal oxides were added to the glasses, the visible transmittances of the dielectric layers decreased and the transmittances in special wavelength regions were reduced at different rates. The change of the transmittance in each wavelength range induced the variation of the visible emission spectra and the change of the color temperature in the PDP. The addition of Co$_3$O$_4$ and CuO slightly decreased the intensity of the blue light, but the intensities of the green and the red light were significantly decreased. Therefore, the color temperature can be improved from 6087K to 7378K and 7057K, respectively.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.36-41
• /
• 2019

Hybrid-type transparent electrodes were fabricated by depositing carbon nanotubes (CNTs) via spray coating on polyethylene terephthalate (PET) substrates and then coating the CNTs with [poly(3,4-ethylenedioxythiophene)] (PEDOT) films via electro-polymerization. For all of the fabricated electrodes, their surface morphologies, electric sheet resistances, visible transmittances, and color properties (e.g., yellowness) were characterized as functions of the applied voltages and process times used in electro-polymerization. The sheet resistance of the CNTs was significantly reduced by the coating of PEDOT, while their visible transmittances slightly decreased. The yellowness values of the PEDOT-coated CNTs were observed to have substantially decreased via electro-polymerization. The experimental results confirmed that the fabricated hybrid electrodes had desirable properties for the application of transparent electrode in terms of the electrical resistance, optical transmittance, and chromaticity.

• 한국전기전자재료학회논문지
• /
• 제11권3호
• /
• pp.237-241
• /
• 1998

In this study, PLZT stock solutions around x/65/35 (x=6~11) ferroelectric region were prepared by Sol-Gel method and deposited on ITO-glass by spin-coating method. The thin films were annealed by RTA(rapid thermal annealing). The variations of crystallographic structure of the thin films were observed using XRD and hysteresis curves, dielectric characteristics, and optical transmittances were measured in order to investigate the characteristics of the thin films. The thin films were crystallized at $750^{\circ}C$ for 5 min by RTA. Relative dielectric constant and optical transmittance increased with increasing La content, Ec and Pr were higher for thin films than for bulk materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.1.1-4
• /
• 1995

In this study, PLZT thin films in AFE region prepared by sol-gel processing were investigated. And PLZT stock solutions were spin-coated on ITO-glass. The PLZT thin films were annealed by RTA. Hysteresis curves, dielectric characteristics and optical transmittances were measured in order to investigates the characteristics far the thin films. The PLZT thin films were crystallized at 750$^{\circ}C$ for 5 mimutes by RTA and the rosette structure composed of perovskite observed in the thin films. In case La content was 2/90/10 antiferroelectric-ferroelectric phase boundary was 2/90/10 PLZT thin film, and its hysteresis curve was good for application of optical information storage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.284-285
• /
• 2006

We prepared ITO thin films using Facing Targets Sputtering(FTS) method with various input currents at room temperature on Polycarbonate(PC) and Polyethersulfon(PES) substrates. As a function of sputtering conditions, electrical and optical properties of prepared ITO thin films were measured. The electrical, optical, structural characteristics of ITO thin films were evaluated by Hall Effect Measurement(EGK), X-Ray Diffractormeter(Rigaku) and UV-VIS spectrometer(HP) respectively. From the results, we obtained ITO thin films that have a resistivity of $4{\times}10^{-4}[{\Omega}-cm]$ on PC and $527{\times}10^{-4}[{\Omega}-cm]$ on PES. Also, the optical transmittances of all samples were over 80%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.487-488
• /
• 2005

We have investigated the Electro-Optical Characteristics for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• 대한화학회지
• /
• 제55권2호
• /
• pp.308-312
• /
• 2011