• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.777-790
• /
• 2001

Theoretical analyses have been tried to design high power and stable operating SLD at 1.55${\mu}{\textrm}{m}$ wavelength range which is the lowest absorption wavelength in optical fiber. The materials of active layer and SCH layer were chosen as conventional In1-xGaxAsyPl-y quaternary composition systems. From the transverse mode and the lateral mode analyses of waveguide, the optical power distributions and the optical confinement factor have been studied for single-mode high power operation. According to these analyses, it was calculated the composition and the thickness of SCH layer to obtain the maximum optical confinement factor. In order to obtain low values of the reflectivity, we used the window region and the lateral tilted angle between tile active region and window region. And the reflectivity of SLD was calculated with the gaussian beam approximation and mode analysis. From these researches, it was confirmed for several results to fabricate the efficient and stable SLD. In case of using $1.3\mum$, InGaAsP SCH layer, the layer thickness was obtained $0.08\mum$, to get the maximum optical confinement factor. Using $0.2\mum$, active layer thickness and $0.08\mum$, SCH layer thickness, the window region length is about $100\mum$ without An coating, $10\mum$ in 1% AR coating to obtain about 10-4 reflectivity. When the tilted angle is about $10~15^{\circ}$, the reflectivity is about 10-3. From these results, if the window region length and tilted angle were controlled appropriately in given device structure, it was confirmed that it is possible to fabricate the stable SLD without AR coating analytically.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.246-249
• /
• 2000

The null lens is designed for testing the elliptical (conic constant>O) mirror which is the third mirror of the off-axis Three Mirror Anastigmat (TMA) designed as a high resolution camera for remote sensing. The mixed type design is proposed as a new design type which has a small annular flat mirror, but has as twice sensitivity as the autostigmatic type design. It is also shown that the null lens of the Mixed type is better than that of the autostigmatic type in terms of the sensitivity of the wavefront distortion which is given as the magnitude of optical path difference with respect to the change of each surface parameters such as the radius of curvature, thickness of lenses and tested mirror.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.435-443
• /
• 2014

Purpose: The purpose of this study was to analyze the design identity visual elements of optical shop brand$\underline{s}$ in order to provide objective data necessary for optical shop brands' design development. Methods: This study examined the design identity concept of the optical shop brands and analyzed visual elements of brand design identity with a focus on the symbols of domestic franchise optical shops, type of a symbol mark, representation style of logo type, color usage, use or non-use of character, etc. Results: Many symbols were directly associated with the eyeglasses, such as eyeglasses and eyes, face and iris. Along with that, letters or figures were also observed. For the type of symbol, most types were found to have the designs that took spherical and word mark shapes. Particularly, the word mark type had English words more often than Korean words. For logo types, the gothic format was dominant. In relation to the thickness of letter, thick boldface type was commonly used. The combination of 2 degrees was the color frequency used most often in the optical shop brand design. For the frequency of color usage, black and red colors were used most often. Particularly, the orange color, as well as the black color, was also often used for the main color of symbols or logo types. Meanwhile, the characters were used only in some optical shop. Most characters were animals and expressed in the cartoon and graphical forms. Conclusions: Typifier, symbol mark, logo type, color, and character are the elements forming the basic development system for brand design identity. Systematic design is needed which clearly ensures the function and role along with the mutual consistency as a important visual component of the optical shop brand.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1220-1222
• /
• 1995

In the design of a complementary electrochromic windows based on $WO_3/Li^+$ conducting electrolyte/$V_2O_5$ system, a characterization of electrochromic properties of $WO_3/V_2O_5$ complementary devices as a function of thickness combinations is necessary in order to predict such as the safe operating voltage, the optical modulation range and the optical switching response. In this paper, the effects of $WO_3\;and\;V_2O_5$ thin films thickness combinations on device performance were systematically investigated.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.80-90
• /
• 1995

In this paper, methods of designing CPW(coplanar waveguide) traveling-wave electrodes are described and their properties are discussed. Especially, the effect of buffer layer thickness to the microwave characteristics of the CPW electrodes are studied in detail. The trade-off relationship between buffer layer thickness and electro-optical properties of the devices are clearly revealde. The microwave characteristics and driving voltage can be further improved by using selected parameters suggested in this paper. To reduce time and effort in designing CPW electrode structure, exact analytical models are proposed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.47-48
• /
• 2000

Parameters of a biaxial compensation film and a liquid crystal cell for the optically compensated bend mode LCD with wide viewing angle were optimized. For practical approach, we calculated the optical refractive indices of a retardation film when thickness of a retardation film was fixed at 50 ${\mu}m$. Furthermore, we also optimized optical parameters of LC cell when parameters of a retardation film were different with designed values, because the biaxial compensation film with exact designed values was very difficult to fabricate. In experiments, we achieved the wide viewing angle of over the ${\pm}$ 60 degrees by using a biaxial compensation film with a practical thickness value.

• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.496-503
• /
• 2023

We present a detailed analysis of the light extraction efficiency (LEE) of a core-shell nanorod light emitting diode (LED) using finite-difference time-domain (FDTD) simulations. We found that the LEE has a deep dependence on source positions and polarization directions based on the calculated LEE results for every x and z position inside the core-shell nanorod structure. The LEEs are different for the upper part (pyramid) and the lower part (sidewall) of the core-shell nanorod owing to total internal reflection (TIR) and the generated optical modes in the structure. As a result, the LEE of sidewall is much larger than that of pyramid. The averaged LEE of the core-shell nanorod LED is also investigated with variable p-GaN thickness, n-GaN thickness, and height for the design guidelines for the optimized LEE of core-shell nanorod LEDs.

• Korean Journal of Optics and Photonics
• /
• v.25 no.1
• /
• pp.14-20
• /
• 2014

The equivalent of a thick lens is a lens which has the same power of refraction and paraxial imaging characteristics for a reference ray, but with a different axial thickness. In this study, thick lenses of an optical system were converted to their equivalent lenses referenced to pupil imaging. Aberration changes due to the lens conversion were compared to the general equivalent lens conversion referenced to object imaging.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.38-49
• /
• 1998

The 3rd generation optical pick-up used popularly in resent years is composed of many optical and electronic components such as laser diode, photo diode, beam splitter, objective lens, grating lens, concave lens, collimator lens etc. Therefore, the design of its optical system and its main base which the said optical and electronic components are set on, is complicated and needs high precision. Its assembly and adjustment in the production line is also difficult. This complication and the demand of high precision get its production cost to be high and its reliability to be low. In this paper, the 4th generation optical pick-up is designed and developed, with the hologram device which laser diode. photo diode, beam splitter. and grating lens are integrated in. This optical pick-up reduces the number of points of adjustment by 3, compared with the 3rd generation optical pick-up of which the number of points of adjustment is 6. This optical pickup also decreases by 4 the number of points of W bonding to have bad influence on environmental reliability, decreases by about 10 the number of parts, and establishes about 20% cost-down of material cost, compared with the 3rd generation optical pick-up.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.10
• /
• pp.492-498
• /
• 2006

A novel surface plasmon resonance(SPR) multisensing method, which does not require imaging apparatus such as CCD, has been proposed and implemented experimentally. The proposed method is based on the multichannel SPR and the separation of signals by use of additional layers whose thickness is controlled. SPR signals are influenced by the thickness of sensing layer as well as the optical condition of sensing surface. As the SPR signals from different ligands are usually positioned closely, the reflected light from sensing surface does not provide us with the clear differences of resonance signal depending on the kinds of ligands. It was found from our experiments that SPR signals from each ligand that is located on the additional layer with different thickness can be separated clearly enough to identify various signals from different ligands. Proposed method with theoretical design and simulation has been verified experimentally by using $SiO_2$ thin film layer as additional layer.