• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.287-291
• /
• 2009

In this paper, an optical switch/modulator is designed and its light propagating characteristics analyzed using a simplified BPM. The distinctive feature of this switch/modulator is that all its waveguide branches are designed as single-mode. The principle of the device is based on the coupled mode theory in the Y-junction interconnecting waveguide. In spite of the fact all waveguides are designed as single-mode, by adjusting the interconnecting waveguide length'of the device the same characteristics as existing up to date devices are obtainable. Numerical results show that the switching characteristics periodically depend upon an interconnecting waveguide length with a spatial of about $150^{{\mu}m}$ in the $Ti:LiNbO_3$ step index waveguide. The design concept would therefore be utilized effectively in fabricating a monolithic high density optical integrated circuit.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.408-413
• /
• 2002

We demonstrated a polarization dependent type 2$\times$2 optical switch, using a binary reflection type SLM. Reflection type FLC was used as a half wave retardation plate. Two inputs were controlled by each SLM for the desired output direction. In conclusion, in the "1" state the average optical loss was 6.6 ㏈, and in the "0" state the average optical loss was 14.6 ㏈, and measured the switching speed as 75 $mutextrm{s}$. By using this method, a polarization dependent type 2$\times$2 optical switch can be demonstrated and the possibility of a 4-port WDM optical switch also verified.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1829-1834
• /
• 2008

An optical switch/modulator is designed and the light propagating characteristics is analyzed by the simplified BPM. The distinctive feature of the switch/modulator is that all the waveguide branches are designed to be single-mode. Principle of the device is based on the coupled mode theory in the Y-junction interconnecting waveguide. In spite of all the waveguides are designed to be single-mode, adjusting the interconnecting waveguide length of the device, the same characteristics as existing device up to date is obtainable. Numerical results show that the switching characteristics periodically depends on the interconnecting waveguide length with a spatial of about 150${\mu}m$ in the Ti:LiNbO3 step index waveguide. The concept of design would be utilized effectively in fabricating the monolithic high density of optical integrated circuit.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.9-9
• /
• 1996

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.34-38
• /
• 2018

An X-band microwave photonic (MWP) filter using switch-based fiber-optic delay lines has been proposed and experimentally demonstrated. It is composed of two electro-optic modulators (EOMs) and $2{\times}2$ optical MEMS-switch-based fiber-optic delay lines. By changing time-delay difference and coefficients of each wavelength signal by using fiber-optic delay lines and an electro-optic modulator, respectively, a bandpass filter or a notch filter can be implemented. For an X-band MWP filter with four channel elements, fiber-optic delay lines with the unit time-delay of 50 ps have been experimentally realized and the frequency responses corresponding to the time-delays has been measured. The measured frequency response error at center frequency and the time-delay difference error were 180 MHz at 10 GHz and 3.2 ps, respectively, when the fiber-optic delay line has the time-delay difference of 50 ps.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.219-221
• /
• 1990

Y-branch directional coupler type optical modulators with three different coupling lengths were fabricated on z-cut LiNbO3 and tested at λ-1.3${\mu}{\textrm}{m}$. One device gad an exact coupling length for complete power transfer and two other devices had coupling lengths. It was confirmed that, for dc operation, experimental results agreed well with theoretical results.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.262-263
• /
• 2002

오늘날 정보화 사회가 세계적으로 구축됨에 따라 초고속 광네트워크 사이의 통신용량의 급격한 증가로 인하여 대용량의 정보를 초고속으로 처리할 광스위치의 필요성이 심각하게 대두되고 있다.[1] 현재 연구되고 있는 광스위치 중에는 광도파로 형테와 MEMS형, 기계식 형태가 있다.[2] 그러나 이들 형태의 광스위치는 대용량과 초고속이라는 두 개의 기능을 동시에 수행하기에는 기술적 어려움이 있다. (중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.42-47
• /
• 2000

A new method for stabilizing the bias of an Electro-Optic mach-Zehnder modulator has been developed to maximize the switching extinction ratio in burst mode packet traffic. By sampling and minimizing the off-level output power of the modulator, a high extinction optical gate switch in obtain regardless of the variation of the packet traffic density.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.672-677
• /
• 2007

A novel method for stabilizing the bias of an Electro-Optic Mach-Zehnder modulator has been proposed and demonstrated to maximize the switching extinction ratio in burst mode packet traffic. By sampling and minimizing the off-level output power of the modulator, a high extinction optical gate switch in obtain regardless of the variation of the packet traffic density.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.351-356
• /
• 1995

A optical switch which on the LiNbO$_3$substrate is fabricated by using proton exchange method and self-alignet method. The annealing at 400[$^{\circ}C$] was carried out to control waveguide width and depth. A self-aligned method, which doesn\`t need the additional mask precesses, was applied to simplify the fabrication processes and to maximize efficiency of electric field application. The depths of the two annealed optical waveguides, which were measured by using ${\alpha}$-step, ware 1.435[K${\AA}$] and 1,380[K${\AA}$]. Using ${\alpha}$-step facility, we examined that the width of waveguides is increased from 5[$\mu\textrm{m}$] to 6.45[$\mu\textrm{m}$] and 6.3[$\mu\textrm{m}$] due to the annealing effects. The process of proton exchange was done at 400[$^{\circ}C$] for 60[min] and annealing process was done at 400[$^{\circ}C$] for 60[min]. The high speed optical modulator has very good figures of merits: the measured voltage of the input waveguide power is 3.5[V], the voltage of the coupling waveguide power is 3.9[mV], and -29.5[dB] crosstalk and 8[V] switching voltage were achieved.