• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.480-487
• /
• 2013

In this study, we researched the LED source MR16,which maintains the strong points of an ordinary MR16 while compensating for its weak points. The optical system composition of the LED MR16 includes four aspherical lens per sheet and a patterned reflector. The aspherical optical system and reflector were designed using optical software, and the performance was estimated using a lighting simulation program. Finally, a prototype was manufactured after analyzing the simulation data, and the reliability of the simulation results was estimated using a comparative analysis of the designed data and measured data.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.67-71
• /
• 2012

The optical properties of PDP, such as the transmittance and reflectance, were analyzed with 3D optical code. Three different ITO-less structures in the front panel are examined. In the assembled panel study, the test 1 structure shows 16.6% and 10.2% higher reflectance than the structures of tests 2 and 3, respectively. In order to check the validation of the simulation result, three 7.5-inch test panels having the same geometry and property are fabricated as simulation models. The calculated reflective properties are compared to the measured data from real panels. The relative difference extracted from the simulation and measurement methods is less than 4.9% and are well matched.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.101-106
• /
• 2017

Optical structures of a tapered ultra-thin light guide film (LGF) were optimized by optical simulation for increasing coupling efficiency between light sources and the LGF. A serration pattern on the entrance side surface could provide a comparable coupling efficiency to that of the conventional LGF where a linear, asymmetric prism array was formed on the taper surface. Several micro-patterns were applied to the top and/or bottom surface of the LGF for achieving better luminance property, and it was found that an optimized micro-pyramid pattern exhibited the highest average luminance together with satisfactory luminance uniformity.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.122-125
• /
• 2003

In this paper, we propose the optical circulator using OADM(optical add-drop multiplexer) and consider its output characteristics by computer simulation. The results obtained by computer simulation, show that the proposed optical circulator operates in WDM wavelength ranges (1530nm -1560nm) well.

• Journal of the Optical Society of Korea
• /
• 제12권1호
• /
• pp.25-30
• /
• 2008

The optical performances of 15-inch edge-lit backlight were simulated by using a Monte Carlo ray-tracing technique. The backlight model was built by combining a wedge-type light guide plate, a diffuser sheet, a tubular fluorescent lamp with a lamp reflector, and two crossed prism sheets. Angular distributions of the luminance on each optical component obtained from simulation were consistent with those obtained from experiments on a real 15-inch backlight. The constructed backlight model was used to evaluate the optical performances of a micro-pyramid film. It was found that the on-axis luminance gain on the pyramid film is higher than that on one prism film but much lower than that on the two crossed prism films. These results suggest that a reliable simulation model can be used to develop new hybrid films and to optimize the optical structure of edge-lit backlight in order to reduce the developmental period.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 하계학술발표회
• /
• pp.18-19
• /
• 2005

• 광학세계
• /
• 통권174호
• /
• pp.22-23
• /
• 2019

Optical Simulation World - 파동광학과 RSoft에 대해 알아보자.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.195-199
• /
• 2006

We report a novel simulation method to calculate optical transmission considering the real paths of optic introduced in a unit pixel of TFT-LCDs using three-dimensional molecular director simulation of the tensor model. The simulation of optical path transmission profile was carried out by calculating new permittivity considered the real paths of optic in liquid crystal cell. As a result, it was clarified that the electro-optic characteristics such as movement of disclination line, contrast ratio and transmittance profile show a large difference according to the viewing angle compared with the conventional method.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1094-1102
• /
• 2011

Recent trends for the miniaturization and weight reduction of portable electronic parts is the use of subminiature components. Assembly of the miniaturized components requires subminiature screws of which pitch sizes are in a micrometer scale. To produce such a subminiature screw with high precision threads, not only a precision forming technology but also high-precision measurement technique is required. In the present work, a vision inspection system is developed to measure the thread profile of a subminiature screw. Optical simulation based on a ray tracing method is used to design and analyze the optical system of the vision inspection apparatus. Through this simulation, optical performance of the developed vision inspection system is optimized. The image processing algorithm for the precision screw inspection is also discussed.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.27-34
• /
• 2015

There has been a critical issue in optical simulation of phosphors in LEDs due to their light-reabsorption properties. To improve the accuracy of optical modeling for a white LED package, we utilized the spectrum data of the phosphor-dispersed encapsulant film instead of the phosphor powder. By measuring white LED packages with green and red phosphors, the maximum difference between simulation and experimental results of a color temperature, a color rendition index number and a color coordinate corresponds to ${\Delta}T=95K$, ${\Delta}Ra=1.7$ and ${\Delta}xy=0.007$, respectively. Based on those results, the proposed method can well explain the change of emission spectra of white LEDs with more than two phosphors which introduce the complex optical phenomena such as absorption, reabsorption, light emission, reflection and scattering, etc.