• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.134-134
• /
• 2009

In this work, we report that crystallization speed as well as the electrical and optical properties about the N-doped $Ge_2Sb_2Te_5$ thin films. The 200-nm-thick N-doped $Ge_2Sb_2Te_5$ thin film was deposited on p-type (100) Si and glass substrate by RF reactive sputtering at room temperature. The amorphous-to-crystalline phase transformation of N-doped $Ge_2Sb_2Te_5$ thin films investigated by X-ray diffraction (XRD). Changes in the optical transmittance of as-deposited and annealed films were measured using a UV-VIS-IR spectrophotometer and four-point probe was used to measure the sheet resistance of N-doped $Ge_2Sb_2Te_5$ thin films annealed at different temperature. In addition, the surface morphology and roughness of the films were observed by Atomic Force Microscope (AFM). The crystalline speed of amorphous N-doped $Ge_2Sb_2Te_5$ films were measured by using nano-pulse scanner with 658 nm laser diode (power : 1~17 mW, pulse duration: 10~460 ns). It was found that the crystalline speed of thin films are decreased by adding N and the crystalline temperature is higher. This means that N-dopant in $Ge_2Sb_2Te_5$ thin film plays a role to suppress amorphous-to-crystalline phase transformation.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.629-637
• /
• 2008

We report several experimental data capable of evaluating the amorphous-to-crystalline (a-c) phase transformation in $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ (x = 0, 0.05, 0.1) thin films prepared by a thermal evaporation. The isothermal a-c structural phase changes were evaluated by XRD, and the optical transmittance was measured in the wavelength range of $800{\sim}3000$ nm using a UV-vis-IR spectrophotometer. A speed of the a-c transition was evaluated by detecting the reflection response signals using a nano-pulse scanner with 658 nm laser diode (power P = $1{\sim}17$ mW, pulse duration t = $10{\sim}460$ ns). The surface morphology and roughness of the films were imaged by AFM. It was found that the crystallization speed was so enhanced with an increase of Ag content. While the sheet resistance of c-phase $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ was similar to that of c-phase $Ge_2Sb_2Te_5$ (i.e., $R_c{\sim}10{\Omega}/{\square}$), the sheet resistance of a-phase $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ was found to be lager than that of a-phase $Ge_2Sb_2Te_5$, $R_a{\sim}5{\times}10^6{\Omega}{/\square}$. For example, the ratios of $R_a/R_c$ for $Ge_2Sb_2Te_5$ and $(Ag)_{0.1}(Ge_2Sb_2Te_5)_{0.9}$ were approximately $5{\times}10^5$ and $5{\times}10^6$, respectively.

• 한국지리정보학회지
• /
• 제1권1호
• /
• pp.109-117
• /
• 1998

하나의 원격탐사자료를 이용하여 얻고자하는 정보를 추출하는 것은 한계가 있다. 현재 원격탐사분야의 세계적인 추세는 광학위성자료와 레이다 위성자료, 항공사진, 항공 스캐닝 데이터, 지상의 분광스캐너 데이터 등을 모두 통합하여, 정보를 추출하고 있다. 그러나 국내에서는 이들 자료의 연구가 따로 행하여지고 있다. 본 연구에서는 광학위성자료와 레이다 위성 자료의 통합기법을 소개하고 이렇게 통합하여 얻어진 자료를 기존연구방식을 이용하여 추출된 결과와 비교하여 고찰해 보고자 하였다. 이를 위하여 서로 다른 여러 가지 디지털 영상의 혼합결과물을 이용하여 분류를 수행하는데 있어서 독자적인 RGB 가법혼합의 밴드별 상관관계의 방식보다는 각기 다른 해상력의 영상들을 IHS 변환 후 다시 RGB 변환하여 얻어진 결과물의 시각적 특성치를 조사하고, 영상을 혼합하는 것이 정확도 및 해상도의 향상을 기대할 수 있다는 비교결과를 얻을 수 있었다.

• International Journal of Contents
• /
• 제10권4호
• /
• pp.11-17
• /
• 2014

The influence of acquisition environment on music score images captured by a camera has not yet been seriously examined. All existing Optical Music Recognition (OMR) systems attempt to recognize music score images captured by a scanner under ideal conditions. Therefore, when such systems process images under the influence of distortion, different viewpoints or suboptimal illumination effects, the performance, in terms of recognition accuracy and processing time, is unacceptable for deployment in practice. In this paper, a novel, lightweight but effective approach for dealing with the issues caused by camera based music scores is proposed. Based on the staff line information, musical rules, run length code, and projection, all regions of interest are determined. Templates created from inverse filter are then used to recognize the music symbols. Therefore, all fragmentation and deformation problems, as well as missed recognition, can be overcome using the developed method. The system was evaluated on a dataset consisting of real images captured by a smartphone. The achieved recognition rate and processing time were relatively competitive with state of the art works. In addition, the system was designed to be lightweight compared with the other approaches, which mostly adopted machine learning algorithms, to allow further deployment on portable devices with limited computing resources.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.355-358
• /
• 2005

Fingerprint recognition systems are the most widely used in biometrics for personal authentication. As they become more familiar, the security weaknesses of fingerprint sensors are becoming better known. In this paper, we propose a liveness detection method that applies correlation filter to the fingerprint recognition systems. The physiological characteristic of sweat pore, observed only in live people, is used as a measure to classify 'live' fingers from 'spoof' fingers. Previous works show that detection of sweat pores and perspiration patterns in fingerprint images can be used as an anti-spoofing measure. These methods don't consider the characteristic of pores in each individual. We construct the correlation filters of each individual which are composed of their pore information. We make the final decision about the "livens" of fingerprint using correlation output. The proposed algorithm was applied to a data set of 110 live, 110 spoof fingerprint images from optical fingerprint scanner and achieved classification rate of 80%.

• 한국의학물리학회지:의학물리
• /
• 제5권1호
• /
• pp.13-24
• /
• 1994

고속촬영이 요구되는 일반적인 적외선 촬영시스템에서는 고속 광주사기에 적외선 광다발을 입력시키기 위해 고가이면서 가공이 어려운 적외선대역 렌즈를 사용하고 있다. 본 논문에서는 고속 촬영이 요구되지 않고 0.1$^{\circ}C$이하의 온도분해능이 크게 요구되는 의료용 적외선 체열촬영 시스템을 저가이면서 가공이 용이한 반사경을 이용한 광학계를 써서 구현하는 방법을 결과와 함께 제시하였다. 적외선 체열촬영시스템은 인체의 표피에서 복사되는 적외선의 양을 계측하여 인체의 표피 온도분포를 2차원 영상으로 보여준다. 구현한 적외선 체열촬영시스템으로 실험한 결과 영상의 화소수를 256$\times$240으로 하고 촬영시간을 4초로 했을 때 온도분해능이 0.1$^{\circ}C$이하인 것을 확인하였다. 인체의 여러 부위에 대한 체열 영상을 시각적으로 잘 보이게 하기 위해 16가지색으로 의사색체화를 하여 예시하였다.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.

• 한국생활과학회지
• /
• 제17권3호
• /
• pp.469-483
• /
• 2008

Body image is important as it is related to self-esteem and can be enhanced by clothing and the degree of enhancement is related to clothing fit. The purpose of the paper is to find the adequate ease distribution of jacket pattern for the obese women who want to slenderize their shape by optical illusion. Subjective evaluation of the visual appearance we collected and, at the same time, 3D clothing air volume was observed for the nine types of experimental jackets with different ease distribution. As results it was found that jacket pattern for the obese women is that the front width of pattern is wider than what of back width in waist and abdomen. It was also noted that there was distance between clothing and skin in the girth around hip of jacket. 3D scanner clearly demonstrated the distribution of ease is useful to find the pattern variables responsible for the slender appearance of the obese women. The ready-to-made clothes for the obese women's clothing should be manufactured systematically in due consideration of the diversity and scarcity of the obese women's body shape.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.50-57
• /
• 2013

The high temperature thermal attacks in welding can affect the residual stress of a frame for automotive assembly accompanying frame deformation. Also the residual stress can induce the negative effect on durability performance of the automobile. In order to analyze the frame deformation, the simplified test frame which had the similar shape (form) of the real automotive frame was fabricated. The contactless optical 3D scanner was used for the shape difference measurement of the frame between before and after the welding. The FE-model of the test frame was composed and the deformation and residual stress simulation were performed. The simulated results were compared with the measured results for the reference of the frame design following as the variation of welding sequency. The deformation shape of the frame by simulation was in good agreement with that by the experimental measurement. In addition, the optimized welding sequency with reduced deformation after welding could be achieved through these analyses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.419-420
• /
• 2008

In this work, we report several experimental data capable of evaluating the phase transition characteristics of (InTe)x(GeTe)y (x = 0.1, 0.3, y =1) pseudo-binary thin films. (InTe)x(GeTe)y phase change thin films have been prepared by thermal evaporator. The crystallization characteristics of amorphous (InTe)x(GeTe)y thin films were investigated by using nano-pulse scanner with 658 nm laser diode (power : 1~17 mW, pulse duration : 10~460 ns) and XRD measurement. It was found that the crystalline speed of In-Ge-Te thin films are faster than $Ge_2Sb_2Te_5$[1] and also the crystalline temperature is higher. Changes in the optical transmittance of as-deposited and annealed films were measured using a UV-VIS-IR spectrophotometer and four-point probe was used to measure the sheeresistance of InGeTe films annealed at different temperature.