• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.65-71
• /
• 2003

To maximize the storage density in a localized hologram recording method, each hologram should be recorded as close as possible to its neighboring holograms. In this case, the reference beams used to record two adjacent holograms may overlap in spatial multiplexing. Through simulations and experiments, we show that there exists an optimal reference beam size to minimize the overlap for a given shifting distance of the reference beams in spatial multiplexing. Thus the advantages of the localized hologram recording method can be minimally sacrificed while the storage density is increased.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.155-164
• /
• 2000

Recently Fiber-optic Micro-cellular Wireless Network is considered to solve frequent handoffs and local traffic unbalance in microcellular systems. In this system, central station which is connected to several microcells by optical fiber manages the channels. We propose an efficient sectorization algorithm which dynamically clusters the microcells to minimize the blocked and handoff calls and to balance the traffic loads in each cell. The problem is formulated as an integer linear programming. The objective is to minimize the blocked and handoff calls. To solve this real time sectorization problem the Tabu Search is considered. In the tabu search intensification by Swap and Delete-then-Add (DTA) moves is implemented by short-term memory embodied by two tabu lists. Diversification is considered to investigate proper microcells to change their sectors. Computational results show that the proposed algorithm is highly effective. The solution is almost near the optimal solution and the computation time of the search is considerably reduced compared to the optimal procedure.

• Journal of Powder Materials
• /
• v.6 no.2
• /
• pp.171-177
• /
• 1999

Ti-45.2at.%Ni-5at.%Cu and Ti-40.2at.%Ni-10atat.%Cu alloy powders were fabricated by gas atomization process. The microstructures, Shape, hardness and phase transformation behaviors of the powders were investigated by means of optical microscopy, scanning electron microscopy, micro-hardness measurement, x-ray diffraction analyses and differential scanning calorimetry. The hardness of the Ti-Ni-XCu alloy powders decreased as Cu-content increased. The x-ray diffraction analyses were carried out for powders without heat treatment, and those that treated at 85$0^{\circ}C$ for an hour in a vaccum state($10^5$ torr) and then quenched into ice water. The intensity of B$19^t$ phase increased with heat treating. The monoclinic B$19^t$ martensite was formed in the Ti-Ni-XCu alloy powders during cooling.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.433-435
• /
• 2005

We have studied the realigning behavior of liquid crystal molecules in liquid crystalline polymer/liquid crystal(LCP/LC) system when they are exposed to external stimulation such as bending and pressing. The birefringence of the LCP/LC in a flexible display device was measured as a function of bending or pressing deformation. The microscopic dynamic behavior of main chain, side chain, and the LC were characterized by FTIR and polarization optical microscopy. When the device is deformed in scattering memory state, liquid crystal(LC) director is found to align from randomly oriented domain state(scattering state) to homeotropic state.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.486-492
• /
• 2002

In this paper. we presented 1 & 2 dimensional minimum mean-squared-error (MMSE) equalization scheme in a digital holographic data storage system to improve bit-error-rate (BER) and to mitigate inter-symbol interference (ISI) which were generated during the data storage and retrieval processes. We showed experimentally for ten data pages retrieved from the holographic storage system that BER and signal-to-noise ratio (SNR) were improved by adopting MMSE equalization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.271-274
• /
• 1998

In this paper, the monodomain alignment of nematic liquid crystal(NLC) in the cell fabricated by one side transcription alignment method on PI surface with side chain were investigated. The LC alignment produced by the transcription alignment method is attributable to a memory effect of the NLC on Pl surfaces. We observed that the pretilt angle of NLC is generated about 3.6$^{\circ}$ in a cell with one side transcription alignment on PI surface. Also, the electro-optical(EO) performance of TN-LCD with one side transcription alignment method on PI surface will be discussed.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.3
• /
• pp.141-144
• /
• 2006

In the present work, we investigated the holographic grating erasing method by means of the optical method. It was formed the grating under the interference of holographic recording He-Ne laser beams on chalcogenide $As_{40}Ge_{10}Se_{15}S_{35}$ thin film with various film thickness and erased the holographic grating by non-polarized He-Ne laser beam. As the results, the recording grating erased the 80 % of formed grating by non-polarized He-Ne laser beam. It was confirmed that the erasing characteristics by non-polarized laser beam need to improve the focusing of beam and the control of beam intensity. And then it can be expected as the application possibility of rewritable holographic memory technology.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.150-154
• /
• 2003

In this paper, we introduce modified parity coding methods to reduce the errors caused by spatial beam intensity variations in a holographic data storage system. We explained the encoding and decoding process of the conventional parity coding and the modified parity coding techniques. We compared the bit-error-rate (BER) performances of the conventional parity coding and the modified parity coding techniques from experimental evaluation.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.61-63
• /
• 1987

In this paper, we develope a system which can perform signal processing for bar-code laser scanner. This system is composed of optical detector and preprocessor. The former detects the diffused light and converts it into TTL lebel output. The latter discriminator valid data from various raw data and transmits data to micro-processor. The preprocessor consists of edge transition detector, latch signal generator, module counter, register array, adder array, and buffer memory control circuit etc..

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.53-54
• /
• 2007

Charged particle type display using particles which have opposite charge and color is based on effect of reversible optical property due to electric field. we designed mask pattern for fabrication of the charged particle type display based on glass substrate and investigated cell gap dependent of driving voltage and selectively driving method. the panel driven by our selectively driving method, we could obtain image which had vary little crosstalk caused by electrical interference and conform the last image maintained by memory effect without additional voltage.