• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2189-2191
• /
• 2000

Electric power systems are becoming advanced by using new technology year by year However, in electric power system environments. electromagnetic interference occurs in measurement, supervisory and control systems, especially in sensors. Optical sensor technologies are useful for solving the problem, since they are not affected by electromagnetic interference because they are composed of insulting materials. In this paper, some applications of optical sensor technology to electric power systems are introduced.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.145-150
• /
• 2007

Optical communication according to request of technology of communications and optical fiber to be full filed faster communication and pass over transmission capacity limit per unit area, per unit hour appeared, and this optical fiber acts the biggest role to influence performance of optical communication network. Optical fiber(PMF Polarization Maintaining Fiber) is used, and is used by electric field measurement, self-discipline measurement, sensor(Sensor) Department by high definition measure such as thermometry and storehouse component that use because make broad sense status and polarized light information in passageway and union with storehouse integrated circuit etc. that use broad sense interference developing could transmit in state that keep transmitting broad sense plane of polarization is polarized light existence. Also, research is developed by optical fiber for Coherent communication recently.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.373-374
• /
• 2006

This paper physically demonstrates that our proposed method improves the Signal-to-Noise Ratio (SNR) of significantly increase the number of acceptable optical signals in PON(Passive Optical Network) systems. This method reduced Optical Beat Interference(OBI) by using CDMA.

• 정보처리학회논문지C
• /
• 제10C권3호
• /
• pp.317-324
• /
• 2003

PN 부호와 광 스위치를 사용하여 시간영역에서 확산하는 CDMA 방식에 의한 광 가입자 액세스 망을 제안한다. 무선통신에 널리 사용되는 PN 계열 부호를 사용하여 양극성(bipolar) 데이터를 수신측에서 상관할 수 있는 구조를 제안한다. 광 스위치의 ON/OFF를 통하여 PN 부호를 소프트웨어적으로 구성할 수 있어 광 가입자에 배분할 수 있는 부호계열의 수가 증가 증가하고, 부호 배분에 있어서 유연성을 갖고 있다. 그리고 이론적으로 제안한 광 가입자 액세스 망의 성능을 해석하고 종래의 광섬유 형 정합필터를 이용한 광 CDMA 방식을 적용한 광 가입자 액세스 망에 비하여 성능이 향상됨을 수치 계산을 통하여 명확히 한다.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.159-164
• /
• 2005

광 펄스가 대기 채널을 통해 전송될 때, 대기 교란은 광 펄스를 감쇠시키고 퍼지게 한다. 이러한 감쇠와 펄스 퍼짐은 광 수신 단에서 펄스 도착시간의 요동에 의해 발생된다. 이러한 펄스 퍼짐이 인접 펄스간의 부호 간 간섭을 일으킨다. 결국, 부호 간 간섭에 의해 인접한 펄스들은 중첩이 되고 비트 전송률 및 무중계 전송거리를 제한하게 된다. 따라서, 디지털 통신시스템에서는 감쇠보다 펄스 퍼짐이 더 중요한 인자가 된다. 이에, 본 논문에서는 시간적 모멘트 함수를 이용하여 대기 교란상태에서 교란 상태를 나타내는 굴절을 구조 함수로 부호 간 간섭을 구하고, 수치 해석을 통해 교란 상태에 따른 부호 간 간섭을 나타내고자 한다.

• Current Optics and Photonics
• /
• 제2권4호
• /
• pp.303-307
• /
• 2018

We propose a simple ultraviolet (UV) sensor consisting of a conventional single-mode optical fiber capped with an azobenzene-moiety-containing polymer. The UV light changes the dimensions of the azobenzene polymer, as well as the refractive index of the material. Incident light with a wavelength of 1550 nm was reflected at the fiber/polymer and polymer/air interfaces, and interference of the reflected beams resulted in spectral interference that shifted the wavelength by 0.78 nm at a UV input power of $2.5mW/cm^2$. The UV sensor's response to wavelength is nonlinear and stable. The response speed of the sensor is limited by detection noise, which can be improved by modifying the insertion loss of the UV sensor and the signal-to-noise ratio of the detection system. The proposed compact UV sensor is easy to fabricate, is not susceptible to electromagnetic interference, and only reacts to UV light.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.174-175
• /
• 2001

This paper theoretically demonstrates that our proposed method improves the Signal-to-Noise Ratio (SNR) of significantly increase the number of acceptable optical signals in FDMA(SCMA) systems. This method reduced Optical Beat Interference(OBI) by using CDMA.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.156-160
• /
• 2007

Surface plasmon resonance(SPR) has been widely studied for biological and chemical sensing applications. The present study conducts numerical simulation for the single and bimetallic layer SPR configurations by using the multiple beam interference matrix(MBIM) method to investigate the influence of wave interference and complex refractive indices of materials on optical characteristics such as reflectance and optical phase shift which are used for sensing. First, calculated reflectances are compared with experimental data for validation. In addition, in the single film structures this study finds out the appropriate film thicknesses with minimum reflectance for cases of gold film and silver film. For a bimetallic silver-gold film structure, in particular, the bimetallic film thicknesses that has the minimum reflectance are found 36 nm for silver and 5 nm for gold. From the results, the use of phase shift would be useful compared to reflectance in determining the SPR configuration because the phase shift becomes more sensitive than reflectance.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.1-10
• /
• 2009

In this paper, we propose a chip-level detection and a spectral-slice scheme for the tunable-transmitter/fixed-receiver (TTFR)-based asynchronous spectral phase-encoded optical codedivision multiple-access (CDMA) system combined with timeencoding. The chip-level detection can enhance the tolerance of multiple access interference (MAI) because the channel collision does not occur as long as there is at least one weighted position without MAI. Moreover, the spectral-slice scheme can reduce the interference probability because the MAI with the different frequency has no adverse effects on the channel collision rate. As a result, these techniques mitigate channel collisions. We analyze the channel collision rate theoretically, and show that the proposed system can achieve a lower channel collision rate in comparison to both conventional systems with and without the time-encoding method.

• 한국광학회지
• /
• 제3권4호
• /
• pp.239-243
• /
• 1992

KDP 결정에서 2차 고조파가 발생될 때와 질소기체에서 CARS신호가 발생될 때 나타나는 간섭현상을 조사하였다. 비선형 신호들의 위상차이를 주기 위하여 광학유리를 이용하여 제작된 위상변이장치와 고압기체셀을 사용하였으며 각 매질에 대한 가간섭길이를 측정하였다. 특정한 스톡스광의 파장에서 CARS신호가 상쇄간섭을 일으키도록 위상변이장치의 두께를 조정한 후, 넓은 파장영역에서 상쇄간섭된 질소 CARS 스펙트럼을 얻었다. 위상변이장치의 두께를 바꾸면서 상쇄간섭정도의 변화를 관찰하였다.